Inkjet-Printed Flexible Transparent Conductive Electrodes Based on Water-Soluble Sacrificial Layer Transfer Printing Technology
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. F. Chun and F. Wang. Recent advances in perovskite-based flexible electroluminescent devices. ACS Nano (2024).10.1021/acsnano.4c06587 ↗
2. S. Wang, J. Xu, W. Wang, G.-J.N. Wang, R. Rastak, F. Molina-Lopez, J.W. Chung, S. Niu, V.R. Feig, and J. Lopez, Skin electronics from scalable fabrication of an intrinsically stretchable transistor array. Nature 555, 83–88 (2018).10.1038/nature25494 ↗
3. G. Cai, J. Wang, K. Qian, J. Chen, S. Li and P. S. Lee. Extremely stretchable strain sensors based on conductive self‐healing dynamic cross‐links hydrogels for human‐motion detection. Adv. Sci. 4 (2017).10.1002/advs.201600190 ↗
4. L. Cai, J. Li, P. Luan, H. Dong, D. Zhao, Q. Zhang, X. Zhang, M. Tu, Q. Zeng, W. Zhou, and S. Xie, Highly transparent and conductive stretchable conductors based on hierarchical reticulate single-walled carbon nanotube architecture. Adv. Funct. Mater. 22, 5238–5244 (2012).10.1002/adfm.201201013 ↗
5. M.S. Miller, J.C. O’kane, A. Niec, R.S. Carmichael, and T.B. Carmichael, Silver nanowire/optical adhesive coatings as transparent electrodes for flexible electronics. ACS Appl. Mater. Interfaces 5, 10165–10172 (2013).10.1021/am402847y ↗
6. A.I. Hofmann, W.T. Smaal, M. Mumtaz, D. Katsigiannopoulos, C. Brochon, F. Schütze, O.R. Hild, E. Cloutet, and G. Hadziioannou, An alternative anionic polyelectrolyte for aqueous PEDOT dispersions: toward printable transparent electrodes. Angew. Chem. 127, 8626–8630 (2015).10.1002/ange.201503024 ↗
7. C. Feng, X. Zheng, R. Xu, Y. Zhou, H. Hu, T. Guo, J. Ding, L. Ying, and F. Li, Highly efficient inkjet printed flexible organic light-emitting diodes with hybrid hole injection layer. Org. Electron. 85, 105822 (2020).10.1016/j.orgel.2020.105822 ↗
8. Y.-X. Lin, K.-Y. Ko, F.-P. Lai, and Y.-S. Chen, Inkjet-printed reflectarray antenna integrating feed and aperture on a flexible substrate using origami techniques. Electron. 13, 2505 (2024).10.3390/electronics13132505 ↗
9. L.A. Pradela-Filho, J.L. Gongoni, I.V. Arantes, D.M. De Farias, and T.R. Paixão, Controlling the inkjet printing process for electrochemical (bio) sensors. Adv. Mater. Technol. 8, 2201729 (2023).10.1002/admt.202201729 ↗
10. X. Qian, Y. Shen, L.-J. Zhang, M. Guo, X.-Y. Cai, Y. Lu, H. Liu, Y.-F. Zhang, Y. Tang, and L. Chen, Bio-inspired pangolin design for self-healable flexible perovskite light-emitting diodes. ACS Nano 16, 17973–17981 (2022).10.1021/acsnano.2c06118 ↗
11. S. Jeong, S. Heo, and H.-J. Kim, Mechanical property variation of AgNW/PDMS nanocomposites for fully elastomeric electrodes. J. Mater. Sci. Mater. Electron. 32, 4727–4736 (2021).10.1007/s10854-020-05210-9 ↗
12. M. Amjadi, A. Pichitpajongkit, S. Lee, S. Ryu, and I. Park, Highly stretchable and sensitive strain sensor based on silver nanowire–elastomer nanocomposite. ACS Nano 8, 5154–5163 (2014).10.1021/nn501204t ↗
13. J. Liu, B. Pang, R. Xue, R. Li, J. Song, X. Zhao, D. Wang, X. Hu, Y. Lu, and L. Wang, Sacrificial layer-assisted nanoscale transfer printing. Microsyst. Nanoeng. 6, 80 (2020).10.1038/s41378-020-00195-1 ↗
14. H. Peng, N. Lu, S. Yang, Y. Lyu, Z. Liu, Y. Bu, S. Shen, M. Li, Z. Li, and L. Gao, A generic sacrificial layer for wide-range freestanding oxides with modulated magnetic anisotropy. Adv. Funct. Mater. 32, 2111907 (2022).10.1002/adfm.202111907 ↗
15. V. Linder, B.D. Gates, D. Ryan, B.A. Parviz, and G.M. Whitesides, Water-soluble sacrificial layers for surface micromachining. Small 1, 730–736 (2005).10.1002/smll.200400159 ↗
16. T. Cheng, Y.-Z. Zhang, W.-Y. Lai, Y. Chen, W.-J. Zeng, and W. Huang, High-performance stretchable transparent electrodes based on silver nanowires synthesized via an eco-friendly halogen-free method. J. Mater. Chem. C 2, 10369–10376 (2014).10.1039/C4TC01959H ↗
17. P. Demeester, I. Pollentier, P. De Dobbelaere, C. Brys, and P. Van Daele, Epitaxial lift-off and its applications. Semicond. Sci. Technol. 8, 1124 (1993).10.1088/0268-1242/8/6/021 ↗
18. F. Wang, Q. Liu, J. Xia, M. Huang, X. Wang, W. Dai, G. Zhang, D. Yu, J. Li, and R. Sun, Laser lift-off technologies for ultra-thin emerging electronics: mechanisms, applications, and progress. Adv. Mater. Technol. 8, 2201186 (2023).10.1002/admt.202201186 ↗
19. J. Nam, Y. Lee, W. Choi, C.S. Kim, H. Kim, J. Kim, D.H. Kim, and S. Jo, Transfer printed flexible and stretchable thin film solar cells using a water-soluble sacrificial layer. Adv. Energy Mater. 6, 1601269 (2016).10.1002/aenm.201601269 ↗
20. C. Zhu, H.-C. Wu, G. Nyikayaramba, Z. Bao, and B. Murmann, Intrinsically stretchable temperature sensor based on organic thin-film transistors. IEEE Electron Device Lett. 40, 1630–1633 (2019).10.1109/LED.2019.2933838 ↗
21. S.H. Safeer, T.L. Vasconcelos, B.S. Oliveira, B.S. Archanjo, M. Nazarkovsky, C. Vilani, F.L. Freire, and V. Carozo, Etching-free transfer and nanoimaging of CVD-grown MoS2 monolayers. J. Phys. Chem. C 125, 21011–21017 (2021).10.1021/acs.jpcc.1c05510 ↗
22. C. Amruth, B. Luszczynska, M.Z. Szymanski, J. Ulanski, K. Albrecht, and K. Yamamoto, Inkjet printing of thermally activated delayed fluorescence (TADF) dendrimer for OLEDs applications. Org. Electron. 74, 218–227 (2019).10.1016/j.orgel.2019.07.011 ↗
23. L. Nayak, S. Mohanty, S.K. Nayak, and A. Ramadoss, A review on inkjet printing of nanoparticle inks for flexible electronics. J. Mater. Chem. C 7, 8771–8795 (2019).10.1039/C9TC01630A ↗
24. M. Park, J. Im, M. Shin, Y. Min, J. Park, H. Cho, S. Park, M.-B. Shim, S. Jeon, and D.-Y. Chung, Highly stretchable electric circuits from a composite material of silver nanoparticles and elastomeric fibres. Nat. Nanotechnol. 7, 803–809 (2012).10.1038/nnano.2012.206 ↗
25. Y. Kim, J. Zhu, B. Yeom, M. Di Prima, X. Su, J.-G. Kim, S.J. Yoo, C. Uher, and N.A. Kotov, Stretchable nanoparticle conductors with self-organized conductive pathways. Nature 500, 59–63 (2013).10.1038/nature12401 ↗
26. L. Zhou, X. Chen, W. Su, Z. Cui, and W.Y. Lai, In-depth investigation of inkjet-printed silver electrodes over large-area: ink recipe, flow, and solidification. ACS Appl. Mater. Interfaces 9, 2102548 (2022).10.1002/admi.202102548 ↗
27. S. Yu, J. Li, L. Zhao, B. Gong, and L. Li, Folding-insensitive, flexible transparent conductive electrodes based on copper nanowires. Sol. Energy Mater. Sol. Cells 231, 111323 (2021).10.1016/j.solmat.2021.111323 ↗
28. M. Du, Z. Yang, Y. Miao, C. Wang, P. Dong, H. Wang, and K. Guo. Facile Nanowelding process for silver nanowire electrodes toward high‐performance large‐area flexible organic light‐emitting diodes. Adv. Funct. Mater., 2404567 (2024).10.1002/adfm.202404567 ↗
29. G. Hassan, J. Bae, and C.H. Lee, Ink-jet printed transparent and flexible electrodes based on silver nanoparticles. J. Mater. Sci. Mater. Electron. 29, 49–55 (2018).10.1007/s10854-017-7886-2 ↗
30. J. Cai, W. Lai, Y. Chen, X. Zhang, Y. Zheng, W. Zhang, X. Chen, Y. Ye, S. Xu, and Q. Yan. Pushing patterning limits of drop‐on‐demand inkjet printing with Cspbbr3/PDMS nanoparticles. Laser Photonics Rev. 2400298.
31. N.H. Ismail, N.Z. Abdul Rashid, S.M.H. SyedMohdJaafar, S.F. Kamarudin, and H.W. Lee, Electrical and mechanical performance of Inkjet-printed flexible electrodes based on reduced graphene oxide/silver nanoparticles. J. Mater. Sci. Mater. Electron. 35, 522 (2024).10.1007/s10854-024-12273-5 ↗
32. X. Wang, W. Guo, Y. Zhu, X. Liang, F. Wang, and P. Peng, Electrical and mechanical properties of ink printed composite electrodes on plastic substrates. Appl. Sci. 8, 2101 (2018).10.3390/app8112101 ↗
33. J. Park, H. Yoon, G. Kim, B. Lee, S. Lee, S. Jeong, T. Kim, J. Seo, S. Chung, and Y. Hong, Highly customizable all solution–processed polymer light emitting diodes with inkjet printed Ag and transfer printed conductive polymer electrodes. Adv. Funct. Mater. 29, 1902412 (2019).10.1002/adfm.201902412 ↗
34. C. Kant, S. Mahmood, M. Seetharaman, and M. Katiyar, Large-area inkjet-printed flexible hybrid electrodes with photonic sintered silver grids/high conductive polymer. Small Methods 8, 2300638 (2024).10.1002/smtd.202300638 ↗
35. C. Yang, and J. Kim, Embedding of inkjet-printed Ag-grid/ITO hybrid transparent electrode into a plastic substrate for flexible electronic devices. Bull. Mater. Sci. 41, 3 (2018).10.1007/s12034-017-1518-6 ↗