Low-Cost Thermoelectric Ink Painting of p-BST and n-BS for Power Generation Applications
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. D.Y. Bao, J. Chen, Y. Yu, W.D. Liu, L.S. Huang, G. Han, J. Tang, D.L. Zhou, L. Yang, and Z.G. Chen, Texture-dependent thermoelectric properties of nano-structured Bi2Te3. J. Chem. Eng. 388, 124295 (2020). https://doi.org/10.1016/j.cej.2020.124295.10.1016/j.cej.2020.124295 ↗
2. G.J. Snyder, and E.S. Toberer, Complex thermoelectric materials. Nat. Mater. 7, 105 (2008). https://doi.org/10.1002/9783527667703.ch10.10.1002/9783527667703.ch10 ↗
3. A.I. Hochbaum, R. Chen, R.D. Delgado, W. Liang, E.C. Garnett, M. Najarian, A. Majumdar, and P. Yang, Enhanced thermoelectric performance of rough silicon nanowires. Nature 451, 163 (2008). https://doi.org/10.1038/nature06381.10.1038/nature06381 ↗
4. H.J. Wu, P.C. Lee, F.Y. Chiu, S.W. Chen, and Y.Y. Chen, Self-assisted nucleation and growth of [010]-oriented Sb2Te3 whisker: the crystal structure and thermoelectric property. J. Mater. Chem. 00, 1 (2013). https://doi.org/10.1021/acsami.2c16150.10.1021/acsami.2c16150 ↗
5. K. Park, K. Ahn, J. Cha, S. Lee, S.I. Chae, S.-P. Cho, S. Ryee, J. Im, J. Lee, S.-D. Park, M.J. Han, I. Chung, and T. Hyeon, Extraordinary off-stoichiometric bismuth telluride for enhanced n-type thermoelectric power factor. J. Am. Chem. Soc. 138(43), 14458 (2016). https://doi.org/10.1021/jacs.6b09222.10.1021/jacs.6b09222 ↗
6. M. Oghbaei, and O. Mirzaee, Microwave versus conventional sintering: a review of fundamentals, advantages and applications. J. Alloys Compd. 494, 175–189 (2010). https://doi.org/10.1016/j.jallcom.2010.01.068.10.1016/j.jallcom.2010.01.068 ↗
7. O. Farhat, J. Faraj, F. Hachem, C. Castelain, and M. Khaled, A recent review on waste heat recovery methodologies and applications: comprehensive review, critical analysis and potential recommendations. Clean. Eng. Technol. 6, 100387 (2022). https://doi.org/10.1016/j.clet.2021.100387.10.1016/j.clet.2021.100387 ↗
8. Y. Liu, Q. Zhang, A. Huang, K. Zhang, S. Wan, H. Chen, Y. Fu, W. Zuo, Y. Wang, X. Cao, L. Wang, U. Lemmer, and W. Jiang, Fully inkjet-printed Ag2Se flexible thermoelectric devices for sustainable power generation. Nat. Commun. 15, 2141 (2024). https://doi.org/10.1038/s41467-024-46183-1.10.1038/s41467-024-46183-1 ↗
9. M. Zeng, D. Zavanelli, J. Chen, M.S. Javash, Y. Du, S. LeBlace, G.J. Snyder, and Y. Zhang, Painting thermoelectric inks toward next-generation energy and thermal devices. Chem. Soc. Rev. 51, 485 (2022). https://doi.org/10.1039/D1CS00490E.10.1039/D1CS00490E ↗
10. S.E. Yang, F. Kim, F. Ejaz, G.S. Lee, H. Ju, S. Choo, J. Lee, G. Kim, S.H. Jung, S. Ahn, H.G. Chae, K.T. Kim, B. Kwon, and J.S. Son, Composition-segmented BiSbTe thermoelectric generator fabricated by multimaterial 3D painting. Nano Energy 81, 105638 (2021). https://doi.org/10.1016/j.nanoen.2020.105638.10.1016/j.nanoen.2020.105638 ↗
11. S.H. Park, S. Jo, B. Kwon, F. Kim, H.W. Ban, J.E. Lee, D.H. Gu, S.H. Lee, Y. Hwang, J.S. Kim, D.B. Hyun, S. Lee, K.J. Choi, W. Jo, and J.S. Son, High-performance shape-engineerable thermoelectric painting. Nat. Commun. 7, 13403 (2016). https://doi.org/10.1038/ncomms13403.10.1038/ncomms13403 ↗
12. F. Kim, B. Kwon, Y. Eom, J.E. Lee, S. Park, S. Jo, S.H. Park, B.S. Kim, H.J. Im, M.H. Lee, T.S. Min, K.T. Kim, H.G. Chae, W.P. King, and J.S. Son, 3D painting of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inks. Nat. Energy 3, 301 (2018). https://doi.org/10.1038/s41560-017-0071-2.10.1038/s41560-017-0071-2 ↗
13. Z. Lu, M. Layani, X. Zhao, L.P. Tan, T. Sun, S. Fan, Q. Yan, S. Magdassi, and H.H. Hng, Fabrication of flexible thermoelectric thin film devices by inkjet painting. Small 10, 3551 (2014). https://doi.org/10.1002/smll.201303126.10.1002/smll.201303126 ↗
14. T. Juntunen, H. Jussila, M. Ruoho, S. Liu, G. Hu, T. Albrow-Owen, L.W.T. Ng, R.C.T. Howe, T. Hasan, Z. Sun, and I. Tittonen, Inkjet printed large-area flexible few-layer graphene thermoelectrics. Adv. Funct. Mater. 28, 1800480 (2018). https://doi.org/10.1002/adfm.201800480.10.1002/adfm.201800480 ↗
15. S.J. Kim, J.H. We, J.S. Kim, G.S. Kim, and B.J. Cho, Thermoelectric properties of p-type Sb2Te3 processed by a screen-painting technique and a subsequent annealing process. J. Alloys Compd. 582, 177 (2014). https://doi.org/10.1016/j.jallcom.2013.07.195.10.1016/j.jallcom.2013.07.195 ↗
16. C. Han, G. Tan, T. Varghese, M.G. Kanatzidis, and Y. Zhang, High-performance PbTe thermoelectric films by scalable and low-cost painting. ACS Energy Lett. 3, 818–822 (2018). https://doi.org/10.1021/acsenergylett.8b00041.10.1021/acsenergylett.8b00041 ↗
17. S.J. Kim, J.H. We, and B.J. Cho, A wearable thermoelectric generator fabricated on a glass fabric. Energy Environ. Sci. 7, 1959–1965 (2014). https://doi.org/10.1039/C4EE00242C.10.1039/C4EE00242C ↗
18. T. Varghese, C. Dun, N. Kempf, M.S. Javash, C. Karthik, J. Richardson, C. Hollar, D. Estrada, and Y. Zhang, Flexible thermoelectric devices of ultrahigh power factor by scalable painting and interface engineering. Adv. Funct. Mater. 30, 1905796 (2019). https://doi.org/10.1002/adfm.201905796.10.1002/adfm.201905796 ↗
19. B. Zhang, J. Sun, H.E. Katz, F. Fang, and R.L. Opila, Promising thermoelectric properties of commercial PEDOT: PSS materials and their Bi2Te3 powder composites. ACS Appl. Mater. Interfaces 11, 3170–3178 (2010). https://doi.org/10.1021/am100654p.10.1021/am100654p ↗
20. J.S. Claumarchirant, B. Hamawandi, A.B. Ergül, A. Cantarero, C.M. Gómez, P. Priyadarshi, N. Neophytou, and M.S. Toprak, Thermoelectric ink and power factor tunability in hybrid films thorough all solution process. ACS Appl. Mater. Interfaces 14, 19295 (2022). https://doi.org/10.1021/acsami.1c24392.10.1021/acsami.1c24392 ↗
21. S. Ruamruk, B. Chayasombat, K. Singsoog, and T. Seetawan, Thermoelectric properties of Sb2Te3 ink fabricated by screen-painting technique. J. Electron. Mater. 53, 4111 (2024). https://doi.org/10.1007/s11664-024-10996-z.10.1007/s11664-024-10996-z ↗
22. A. Vora-ud, S. Thaowonkaew, J. Khajonrit, K. Singsoog, P. Muthitamongkol, C. Chananonwathorn, N. Chanlek, M. Horpathum, S. Maensiri, and T. Seetawan, Rapid thermal annealing induced the c-axis (00l) preferred orientation and the p-type thermoelectric properties of Bi-Sb-Te thin films. Thin Solid Films 706, 138094 (2020). https://doi.org/10.1016/j.tsf.2020.138094.10.1016/j.tsf.2020.138094 ↗
23. L. Tang, L. Li, R. Chen, C. Wang, W. Ma, and X. Ma, Adsorption of acetone and isopropanol on organic acid modified activated carbons. J. Environ. Chem. Eng. 4, 2045 (2016). https://doi.org/10.1016/j.jece.2016.03.031.10.1016/j.jece.2016.03.031 ↗
24. M. Tan, Y. Hao, Y. Deng, D. Yan, and Z. Wu, Tilt-structure and high-performance of hierarchical Bi1.5Sb0.5Te3 nanopillar arrays. Sci. Rep. 8, 6384 (2018). https://doi.org/10.1038/s41598-018-24872-4.10.1038/s41598-018-24872-4 ↗
25. B. Belec, K. Ferfolja, T. Goršak, N. Kostevšek, S. Gardonio, M. Fanetti, and M. Valant, Inherent surface properties of adsorbent-free ultrathin Bi2Se3 topological insulator platelets. Sci. Rep. 9, 19057 (2019). https://doi.org/10.1038/s41598-019-55646-1.10.1038/s41598-019-55646-1 ↗
26. H. Jalili, B. Aslibeiki, A.G. Varzaneh, and V.A. Chernenko, Beilstein, The effect of magneto crystalline anisotropy on the properties of hard and soft magnetic ferrite nanoparticle. J. Nanotechnol. 10, 1348–1359 (2019). https://doi.org/10.3762/bjnano.10.133.10.3762/bjnano.10.133 ↗
27. R.M. German, Rheological model for viscous flow densification during supersolidus liquid phase sintering. Sci. Sinter. 38, 27 (2006). https://doi.org/10.2298/SOS0601027G.10.2298/SOS0601027G ↗
28. M.H. Lee, K.R. Kim, J.S. Rhyee, S.D. Park, and G.J. Snyder, High thermoelectric figure-of-merit in Sb2Te3/Ag2Te bulk composites as Pb-free p-type thermoelectric materials. J. Name. 00, 1–3 (2013). https://doi.org/10.1039/C5TC01623A.10.1039/C5TC01623A ↗
29. E. Vieira, J. Figureira, A.L. Pires, J. Grilo, M.F. Silva, A.M. Pereira, and L.M. Goncalves, Bi2Te3 and Sb2Te3 thin films with enhanced thermoelectric properties for flexible thermal sensors. Proceedings. 2, 815 (2018). https://doi.org/10.3390/proceedings2130815.10.3390/proceedings2130815 ↗
30. G.J. Snyder, A.H. Snyder, M. Wood, R. Guranathan, B.H. Snydera, and C. Niu, Weighted mobility. Adv. Mater. 32, 2001537 (2020). https://doi.org/10.1002/adma.202001537.10.1002/adma.202001537 ↗
31. Y. Zhang, X. Jia, H. Sun, B. Sun, B. Sun, B. Liu, H. Liu, L. Kong, and H. Ma, Enhanced thermoelectric performance of nanostructured CNTs/BiSbTe bulk composite from rapid pressure-quenching induced multi-scale microstructure. J. Materiomics 2, 316–323 (2016). https://doi.org/10.1016/j.jmat.2016.08.002.10.1016/j.jmat.2016.08.002 ↗
32. S. Bayesteh, S. Sailler, H. Schorb, R. He, G. Schierning, K. Nielsch, and N. Perze, Mobility-enhanced thermoelectric performance in textured nanograin Bi2Se3, effect on scattering and surface-like transport. Mater. Today. Phys. 24, 100669 (2022). https://doi.org/10.1016/j.mtphys.2022.100669.10.1016/j.mtphys.2022.100669 ↗
33. J.H. We, S.J. Kim, G.S. Kim, and B.J. Cho, Improvement of thermoelectric properties of screen-printed Bi2Te3 thick film by optimization of the annealing process. J. Alloys Compd. 552, 107–110 (2013). https://doi.org/10.1016/j.jallcom.2012.10.085.10.1016/j.jallcom.2012.10.085 ↗
34. S.E. Yang, F. Kim, F. Ejaz, G.S. Lee, H. Ju, S. Choo, J. Lee, G. Kim, S.H. Jung, S. Ahn, H.G. Chae, K.T. Kim, B. Kwon, and J.S. Son, Composition-segmented BiSbTe thermoelectric generator fabricated by multimaterial 3D printing. Nano Energy 81, 105638 (2021). https://doi.org/10.1016/j.nanoen.2020.105638.10.1016/j.nanoen.2020.105638 ↗
35. Y. Du, J.G. Chen, Q.F. Meng, J.Y. Xu, B. Paul, and P. Eklund, Flexible ternary carbon black/Bi2Te3 based alloy/polylactic acid thermoelectric composites fabricated by additive manufacturing. J. Materiomics 6, 293 (2020). https://doi.org/10.1016/j.jmat.2020.02.010.10.1016/j.jmat.2020.02.010 ↗
36. M. He, Y. Zhao, B. Wang, Q. Xi, J. Zhou, and Z. Liang, 3D printing fabrication of amorphous thermoelectric materials with ultralow thermal conductivity. Small 44, 5889 (2015). https://doi.org/10.1002/smll.201502153.10.1002/smll.201502153 ↗
37. S. Hwang, W.J. Potscavage, Y.S. Yang, I.S. Park, T. Matsushima, and C. Adachi, Solution-processed organic thermoelectric materials exhibiting doping-concentration-dependent polarity†. Phys. Chem. Chem. Phys. 18, 29199 (2016). https://doi.org/10.1039/C6CP04572C.10.1039/C6CP04572C ↗
38. S. Ferhat, C. Domain, J. Vidal, D. Noรซl, B. Ratier, and B. Lucas, Organic thermoelectric devices based on a stable n-type nanocomposite printed on paper†. Sustain. Energy Fuels. 2, 199 (2018). https://doi.org/10.1039/C7SE00313G.10.1039/C7SE00313G ↗
39. R.B. Aïch, N. Blouin, A. Bouchard, and M. Leclerc, Electrical and thermoelectric properties of poly(2,7-carbazole) derivatives. Chem. Mater. 21, 751 (2009). https://doi.org/10.1021/cm8031175.10.1021/cm8031175 ↗
40. D.K. Taggart, Y. Yang, S.C. Kung, T.M. McIntire, and R.M. Penner, Enhanced thermoelectric metrics in ultra-long electrodeposited PEDOT nanowires. Nano Lett. 11, 125 (2011). https://doi.org/10.1021/nl103003d.10.1021/nl103003d ↗
41. K. Xu, G. Chen, and D. Qiu, Convenient construction of poly(3,4-ethylenedioxythiophene)–graphene pie-like structure with enhanced thermoelectric performance†. J. Mater. Chem. A. 1, 12395–12399 (2013). https://doi.org/10.1039/C3TA12691A.10.1039/C3TA12691A ↗
42. K.C. See, J.P. Feser, C.E. Chen, A. Majumdar, J.J. Urban, and R.A. Segalman, Water-processable polymer-nanocrystal hybrids for thermoelectrics. Nano Lett. 11, 4664 (2010). https://doi.org/10.1021/nl102880k.10.1021/nl102880k ↗
43. C. Ou, A.L. Sangle, A. Datta, Q. Jing, T. Busolo, T. Chalklen, V. Narayan, and S. Kar-Narayan, Fully printed organic-inorganic nanocomposites for flexible thermoelectric applications. ACS Appl. Mater. Interfaces 23, 19580–19587 (2018). https://doi.org/10.1021/acsami.8b01456.10.1021/acsami.8b01456 ↗
44. N. Toshima, M. Imai, and S. Ichikawa, Organic-inorganic nanohybrids as novel thermoelectric materials: hybrids of polyaniline and bismuth (III) telluride nanoparticles. J. Electron. Mater. 40, 898 (2011). https://doi.org/10.1007/s11664-010-1403-1.10.1007/s11664-010-1403-1 ↗
45. E.W. Zaia, A. Sahu, P. Zhou, M.P. Gordon, J.D. Forster, S. Aloni, Y.-S. Liu, J. Guo, and J.J. Urban, Carrier scattering at alloy nanointerfaces enhances power factor in PEDOT:PSS hybrid thermoelectrics. Nano Lett. 16, 3352 (2016). https://doi.org/10.1021/acs.nanolett.6b01009.10.1021/acs.nanolett.6b01009 ↗
46. M. Piao, J. Na, J. Choi, J. Kim, G.P. Kennedy, G. Kim, S. Roth, and U. Dettlaff-Weglikowska, Effect of intertube junctions on the thermoelectric power of monodispersed single walled carbon nanotube networks. J. Phys. Chem. C 118, 26454 (2014). https://doi.org/10.1021/jp505682f.10.1021/jp505682f ↗
47. D. Qu, X. Li, H. Wang, and G. Chen, Assembly strategy and performance evaluation of flexible thermoelectric devices. Adv. Sci. 15, 1900584 (2019). https://doi.org/10.1002/advs.201900584.10.1002/advs.201900584 ↗
48. Z. Cao, E. Koukharenko, R.N. Torah, J. Tudor, and S.P. Beeby, Flexible screen printed thick film thermoelectric generator with reduced material resistivity. J. Phys. Conf. Ser. 557, 012016 (2014). https://doi.org/10.1088/1742-6596/557/1/012016.10.1088/1742-6596/557/1/012016 ↗
49. G.A. Sevilla, S.B. Inayat, J.P. Rojas, A.M. Hussain, and M.M. Hussain, Decal electronics: printable packaged with 3D Printing high-performance flexible CMOS electronic systems. Small 9, 3916 (2013). https://doi.org/10.1002/admt.201600175.10.1002/admt.201600175 ↗