journal article·2025-12

Analytical Modeling and Validation of Thermal Fatigue Failure in Die Attach Structures for Power Electronics Modules

Xinghe Luan, Liguo Ding, Danlei Jiang, Xuemin Li, Hongjie Zhang, Kewei Li, Shaohui Wu, Longzao Zhou, Fengshun Wu

Journal of Electronic Materials· Volume 54· Issue 12
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Electronic Packaging and Soldering Technologies · Electromagnetic Compatibility and Noise Suppression

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. B. Hu, J. Ortiz Gonzalez, L. Ran, H. Ren, Z. Zeng, W. Lai, B. Gao, O. Alatise, H. Lu, C. Bailey, and P. Mawby, Failure and reliability analysis of a SiC power module based on stress comparison to a Si device. IEEE Trans. Device Mater. Reliab. 17, 727 (2017).10.1109/TDMR.2017.2766692 ↗
2. A.S. Bahman, K. Ma, and F. Blaabjerg, A lumped thermal model including thermal coupling and thermal boundary conditions for high-power IGBT modules. IEEE Trans. Power Electron. 33, 2518 (2018).10.1109/TPEL.2017.2694548 ↗
3. X. Wu, X. Yang, X. Dai, C. Tu, and G. Liu, A physical lifetime prediction methodology for IGBT module by explicit emulation of solder layer degradation. Microelectron. Reliab. 127, 114384 (2021).10.1016/j.microrel.2021.114384 ↗
4. Y. Huang, H. Deng, Y. Luo, F. Xiao, B. Liu, and X. Tang, Fatigue mechanism of die-attach joints in IGBTs under low-amplitude temperature swings based on 3D electro-thermal-mechanical Fe simulations. IEEE Trans. Ind. Electron. 68, 3033 (2021).10.1109/TIE.2020.2977563 ↗
5. R. Darveaux, Effect of simulation methodology on solder joint crack growth correlation and fatigue life prediction. J. Electron. Packag. 124, 147 (2002).10.1115/1.1413764 ↗
6. A. Hanif, Y. Yu, D. DeVoto, and F. Khan, A comprehensive review toward the state-of-the-art in failure and lifetime predictions of power electronic devices. IEEE Trans. Power Electron. 34, 4729 (2019).10.1109/TPEL.2018.2860587 ↗
7. H. Oh, B. Han, P. McCluskey, C. Han, and B.D. Youn, Physics-of-failure, condition monitoring, and prognostics of insulated gate bipolar transistor modules: a review. IEEE Trans. Power Electron. 30, 2413 (2015).10.1109/TPEL.2014.2346485 ↗
8. Y. Huang, Y. Luo, F. Xiao, and B. Liu, Failure mechanism of die-attach solder joints in IGBT modules under pulse high-current power cycling. IEEE J. Emerg. Sel. Top. Power Electron. 7, 99 (2019).10.1109/JESTPE.2018.2871474 ↗
9. G. Meneghetti and M. Ricotta, A heat energy dissipation approach to elastic-plastic fatigue crack propagation. Theor. Appl. Fract. Mech. 105, 102405 (2020).10.1016/j.tafmec.2019.102405 ↗
10. U. Drofenik, I. Kovacevic, R. Schmidt, and J.W. Kolar, Multi-domain simulation of transient junction temperatures and resulting stress-strain behavior of power switches for long-term mission profiles, in 2008 11th Workshop Control Model. Power Electron. (2008) pp. 1–710.1109/COMPEL.2008.4634691 ↗
11. J.P. Ciech, Solder reliability solutions: a PC-based design-for-reliability tool. Solder. Surf. Mount Technol. 9, 45 (1997).10.1108/09540919710800638 ↗
12. X. Yang, Z. Lin, J. Ding, and Z. Long, Lifetime prediction of IGBT modules in suspension choppers of medium/low-speed maglev train using an energy-based approach. IEEE Trans. Power Electron. 34, 738 (2019).10.1109/TPEL.2018.2812732 ↗
13. I.F. Kovacevic, U. Drofenik, and J.W. Kolar, New physical model for lifetime estimation of power modules, in 2010 Int. Power Electron. Conf. - ECCE ASIA - (2010) pp. 2106–211410.1109/IPEC.2010.5543755 ↗
14. H. Lu and C. Bailey, Reliability prediction for IGBT solder joints using Clech algorithm, in 2016 17th Int. Conf. Electron. Packag. Technol. (ICEPT) (2016) pp. 1059–106310.1109/ICEPT.2016.7583309 ↗
15. L. Long, C. Tu, B. Xiao, H. Xu, and S. Liu, Improved lifetime prediction model of IGBT module considering aging effect of solder layer, in 2021 11th Int. Conf. Power Energy Syst. (ICPES) (2021) pp. 79–8510.1109/ICPES53652.2021.9683869 ↗
16. H. Lu and C. Bailey, Approximate methods for IGBT solder joint stress and fatigue prediction, in 2016 6th Electron. Syst.-Integr. Technol. Conf. (ESTC) (2016) pp. 1–610.1109/ESTC.2016.7764675 ↗
17. I.F. Kovacevic-Badstuebner, J.W. Kolar, and U. Schilling, Modelling for the lifetime prediction of power semiconductor modules, in Reliability of Power Electronic Converter Systems, ed. by H.S.-H. Chung, H.S.-H. Wang, F.S.-H. Blaabjerg, and M.S.-H. Pecht (Institution of Engineering and Technology: London, UK, 2015), pp. 103–140.10.1049/PBPO080E_ch5 ↗
18. X. Yang, X. Wu, K. Heng, and G. Liu, A computationally efficient IGBT lifetime prediction method based on successive initiation technique by iteratively using Clech algorithm. IEEE J. Emerg. Sel. Top. Power Electron. 11, 3468 (2023).10.1109/JESTPE.2023.3244368 ↗
19. X. Wu, X. Yang, X. Dai, and J. Wang, Investigation on inelastic strain energy of IGBT solder layers during aging by the Clech algorithm, in 2020 IEEE 9th Int. Power Electron. Motion Control Conf. (IPEMC2020-ECCE Asia) (2020) pp. 60–6510.1109/IPEMC-ECCEAsia48364.2020.9368050 ↗
20. S. Yuan, L. Wang, Y. Liu, Q. Chen, Z. Zhao, and K. Gao, An improved stress-strain model considering the aging effect of solder layers, in 2024 IEEE 10th Int. Power Electron. Motion Control Conf. (IPEMC2024-ECCE Asia) (2024) pp. 1724–172810.1109/IPEMC-ECCEAsia60879.2024.10567492 ↗
21. E. Suhir, Predictive analytical thermal stress modeling in electronics and photonics. Appl. Mech. Rev. 62 (2009) p. 040801.10.1115/1.3077136 ↗
22. L. Li, X. Du, J. Chen, and Y. Wu, Thermal fatigue failure of micro-solder joints in electronic packaging devices: a review. Materials 17, 2365 (2024).10.3390/ma17102365 ↗
23. Y. Wen and C. Basaran, An analytical model for thermal stress analysis of multi-layered microelectronic packaging. Mech. Mater. 36, 369 (2004).10.1016/S0167-6636(03)00076-0 ↗
24. P. Hall, Forces, moments, and displacements during thermal chamber cycling of leadless ceramic chip carriers soldered to printed boards. IEEE Trans. Compon. Hybrids Manuf. Technol. 7, 314 (1984).10.1109/TCHMT.1984.1136384 ↗
25. P. Hall, Creep and stress relaxation in solder joints of surface-mounted chip carriers. IEEE Trans. Compon. Hybrids Manuf. Technol. 10, 556 (1987).10.1109/TCHMT.1987.1134800 ↗
26. P.M. Hall, Creep and stress relaxation in solder joints, Solder joint reliability: theory and applications. ed. J.H. Lau (Boston: Springer, 1991), pp. 306–332.10.1007/978-1-4615-3910-0_10 ↗
27. E. Jih and Y.-H. Pao, Evaluation of design parameters for leadless chip resistors solder joints. J. Electron. Packag. 117, 94 (1995).10.1115/1.2792087 ↗
28. Y.-H. Pao, S. Badgley, R. Govila, L. Baumgartner, R. Allor, and R. Cooper, Measurement of mechanical behavior of high lead lead-tin solder joints subjected to thermal cycling. J. Electron. Packag. 114, 135 (1992).10.1115/1.2906410 ↗
29. S. Timoshenko, Analysis of bi-metal thermostats. J. Opt. Soc. Am. 11, 233 (1925).10.1364/JOSA.11.000233 ↗
30. B.J. Aleck, Thermal stresses in a rectangular plate clamped along an edge. J. Appl. Mech. 16, 118 (1949).10.1115/1.4009924 ↗
31. E. Suhir, Stresses in bi-metal thermostats. J. Appl. Mech. 53, 657 (1986).10.1115/1.3171827 ↗
32. E. Suhir, Calculated thermally induced stresses in adhesively bonded and soldered assemblies, in Proc. Int. Symp. Microelectron. (1986) pp. 383–392
33. E. Suhir, Thermal stress in a bi-material assembly with a ‘piecewise-continuous’ bonding layer: theorem of three axial forces. J. Phys. D Appl. Phys. 42, 045507 (2009).10.1088/0022-3727/42/4/045507 ↗
34. E. Suhir and T.M. Sullivan, Analysis of interfacial thermal stresses and adhesive strength of bi-annular cylinders. Int. J. Solids Struct. 26, 581 (1990).10.1016/0020-7683(90)90031-P ↗
35. E. Suhir, Thermally induced stresses in an optical glass fiber soldered into a ferrule. J. Lightwave Technol. 12, 1766 (1994).10.1109/50.337488 ↗
36. E. Suhir, Interfacial thermal stresses in a bi-material assembly with a low-yield-stress bonding layer. Modell. Simul. Mater. Sci. Eng. 14, 1421 (2006).10.1088/0965-0393/14/8/009 ↗
37. E. Suhir, An approximate analysis of stresses in multilayered elastic thin films. J. Appl. Mech. 55, 143 (1988).10.1115/1.3173620 ↗
38. E. Suhir, Approximate evaluation of the elastic thermal stresses in a thin film fabricated on a very thick circular substrate. J. Electron. Packag. 116, 171 (1994).10.1115/1.2905682 ↗
39. E. Suhir, Predicted thermally induced stresses in, and the bow of, a circular substrate/thin-film structure. J. Appl. Phys. 88, 2363 (2000).10.1063/1.1286096 ↗
40. E. Suhir, Adhesively bonded assemblies with identical nondeformable adherends and ‘piecewise continuous’ adhesive layer: predicted thermal stresses in the adhesive. Int. J. Solids Struct. 37, 2229 (2000).10.1016/S0020-7683(98)00317-5 ↗
41. E. Suhir, Adhesively bonded assemblies with identical nondeformable adherends and nonhomogeneous adhesive layer: predicted thermal stresses in the adhesive. J. Reinf. Plast. Compos. 17, 1588 (1998).10.1177/073168449801701801 ↗
42. E. Suhir, Analytical thermal stress model for a typical flip-chip (FC) package design. J. Mater. Sci. Mater. Electron. 29, 2676 (2018).10.1007/s10854-017-8194-6 ↗
43. H.B. Fan, M.M.F. Yuen, and E. Suhir, Prediction of delamination in a bi-material system based on free-edge energy evaluation, in 53rd Electron. Compon. Technol. Conf., 2003. Proc. (2003) pp. 1160–116410.1109/ECTC.2003.1216438 ↗
44. W.-R. Jong and M.-L. Chang, The analysis of warpage for integrated circuit devices. J. Reinf. Plast. Compos. 19, 164 (2000).10.1177/073168440001900206 ↗
45. C.A. Klein, Thermal stress modeling for diamond-coated optical windows, Laser-induced damage in optical materials: 1990. ed. H.E. Bennett, L.L. Chase, A.H. Guenther, B.E. Newnam, and M.J. Soileau (West Conshohocken: ASTM International, 1991), pp. 488–509.
46. D. Sujan, M.V.V. Murthy, K.N. Seetharamu, and A.Y. Hassan, Engineering model for interfacial stresses of a heated bimaterial structure with bond material used in electronic packages. J. Microelectron. Electron. Packag. 2, 132 (2005).10.4071/1551-4897-2.2.132 ↗
47. W. Assaad, E. Smits, and R. Pranger, An analytical model describing residual stresses in thin die attach layer, in 2024 25th Int. Conf. Therm., Mech. Multi-Phys. Simul. Exp. Microelectron. Microsyst. (EuroSimE) (2024) pp. 1–810.1109/EuroSimE60745.2024.10491465 ↗
48. S. Hao, W. Chu, P.S. Ho, J. Sohn Lee, and R. Huang, Analytical and finite element study on warpage and stress of 2.5D chip-package structures, in 2021 IEEE Int. Symp. Phys. Fail. Anal. Integr. Circuits (IPFA) (2021) pp. 1–810.1109/IPFA53173.2021.9617246 ↗
49. M.T. Vellukunnel, M. Khanal, and X. Fan, Thermal stresses in a bi-layer assembly in electronics packaging, in 2023 24th Int. Conf. Therm., Mech. Multi-Phys. Simul. Exp. Microelectron. Microsyst. (EuroSimE) (2023) pp. 1–710.1109/EuroSimE56861.2023.10100842 ↗
50. A. Jain, D.P. Parekh, M. Bergendahl, and K. Sikka, Analytical solution for a chip temperature distribution in a multilayer chip-package with thermal warpage, in 2021 20th IEEE Intersoc. Conf. Therm. Thermomech. Phenom. Electron. Syst. (iTherm) (2021) pp. 114–12210.1109/ITherm51669.2021.9503285 ↗
51. M.-Y. Tsai and Y.-W. Wang, A theoretical solution for thermal warpage of flip-chip packages. IEEE Trans. Compon. Packag. Manuf. Technol. 10, 72 (2020).10.1109/TCPMT.2019.2933546 ↗
52. L. Wan, Influence of material parameters on stress and deformation of interconnected laminated structures (Wuhan: Huazhong University of Science & Technology, 2021).
53. R. Sundararajan, P. McCluskey, and S. Azarm, Semi analytic model for thermal fatigue failure of die attach in power electronic building blocks, in 1998 4th Int. High Temp. Electron. Conf. (HITEC) (Cat. No.98EX145) (1998) pp. 94–10210.1109/HITEC.1998.676768 ↗
54. B. Jiang and Z. Wang, Research on equivalent approach for mechanical property of thick composite laminates. Mach. Build. Autom. 47, 63 (2018).
55. B. Ji, X. Song, W. Cao, V. Pickert, Y. Hu, J.W. Mackersie, and G. Pierce, In situ diagnostics and prognostics of solder fatigue in IGBT modules for electric vehicle drives. IEEE Trans. Power Electron. 30, 1535 (2015).10.1109/TPEL.2014.2318991 ↗
56. C.H. Raeder, L.E. Felton, R.W. Messier, and L.F. Coffin, Thermomechanical stress-strain hysteresis of Sn-Bi eutectic solder alloy, in 17th IEEE/CPMT Int. Electron. Manuf. Technol. Symp. 'Manuf. Technol. - Present Future' (1995) pp. 263–26810.1109/IEMT.1995.526124 ↗
57. W. Engelmaier and A.I. Attarwala, Surface-mount attachment reliability of clip-leaded ceramic chip carriers on FR-4 circuit boards. IEEE Trans. Compon. Hybrids Manuf. Technol. 12, 284 (1989).10.1109/33.31435 ↗
58. W. Engelmaier, Functional cycles and surface mounting attachment reliability. Circuit World 11, 61 (1985).10.1108/eb046004 ↗
59. D. Munz and T. Fett, Physical properties, Ceramics. ed. D. Munz, and T. Fett (Berlin: Springer, 1999), pp. 9–17.10.1007/978-3-642-58407-7_2 ↗
60. K. Ding, Z. Wu, M. Huang, B. Zhang, and J. Cai, A novel panel level double side embedded package for small size power devices, in 2019 IEEE 69th Electron. Compon. Technol. Conf. (ECTC) (2019), pp. 1306–131110.1109/ECTC.2019.00202 ↗
61. Z. Chen, H.Y. Hwang, N. Jaafar, and D.M.W. Rhee, Study on power cycling reliability of power module with single metal layer flexible substrate by finite element analysis, in 2015 IEEE 17th Electron. Packag. Technol. Conf. (EPTC) (2015) pp. 1–710.1109/EPTC.2015.7412307 ↗
62. A.A. Bajwa and J. Wilde, Reliability modeling of Sn–Ag transient liquid phase die-bonds for high-power SiC devices. Microelectron. Reliab. 60, 116 (2016).10.1016/j.microrel.2016.02.016 ↗
63. D.M. Follstaedt, J.A. Knapp, and S.M. Myers, Mechanical properties of ion-implanted amorphous silicon. J. Mater. Res. 19, 338 (2004).10.1557/jmr.2004.19.1.338 ↗
64. H. Schoeller, S. Bansal, A. Knobloch, D. Shaddock, and J. Cho, Microstructure evolution and the constitutive relations of high-temperature solders. J. Electron. Mater. 38, 802 (2009).10.1007/s11664-009-0767-6 ↗
65. R. Darveaux, Effect of assembly stiffness and solder properties on thermal cycle acceleration factors: TIMA Editions. (2005) pp. 192-203.
66. M.A. Gharaibeh, A study on the thermomechanical response of various die attach metallic materials of power electronics. Solder Surf. Mt. Tech. 36, 192 (2024).10.1108/SSMT-12-2023-0068 ↗
67. G. Khatibi, A. Betzwar Kotas, and M. Lederer, Effect of aging on mechanical properties of high temperature Pb-rich solder joints. Microelectron. Reliab. 85, 1 (2018).10.1016/j.microrel.2018.03.009 ↗
68. G.J. Riedel, R. Schmidt, C. Liu, H. Beyer, and I. Alaperae, Reliability of large area solder joints within IGBT modules: numerical modeling and experimental results, in 2012 7th Int. Conf. Integr. Power Electron. Syst. (CIPS) (2012), pp. 1–6
69. J. Zhan, D. Yang, M. Xie, C. Qin, and H. Dong, Effect of porosity in copper nano-sintering on the reliability of power devices, in 2024 25th Int. Conf. Electron. Packag. Technol. (ICEPT) (2024), pp. 1–510.1109/ICEPT63120.2024.10668449 ↗
70. Z. Cui, Q. Jia, H. Zhang, Y. Wang, L. Ma, G. Zou, and F. Guo, Review on shear strength and reliability of nanoparticle sintered joints for power electronics packaging. J. Electron. Mater. 53, 2703 (2024).10.1007/s11664-024-10970-9 ↗
71. L.A. Navarro, X. Perpina, P. Godignon, J. Montserrat, V. Banu, M. Vellvehi, and X. Jorda, Thermomechanical assessment of die-attach materials for wide bandgap semiconductor devices and harsh environment applications. IEEE Trans. Power Electron. 29, 2261 (2014).10.1109/TPEL.2013.2279607 ↗
72. T. Suzuki, Y. Yasuda, T. Terasaki, T. Morita, Y. Kawana, and D. Ishikawa, Tensile-fatigue behavior of sintered copper die-attach material. IEEE Trans. Device Mater. Reliabil. 2, 19 (2019).
73. Q. Jiang, S. Mukherjee, B.Vogt, A.Dasgupta, D.Shaddock, L.Yin, Mechanical Constitutive Properties of Two High-Temperature Lead-Rich Solders, in 2015 Int. Electron. Packag. Technical. Conf. and Exh (InterPACK) (2015) pp. V002T01A005.10.1115/IPACK2015-48708 ↗
74. V. Smet, F. Forest, J.J. Huselstein, F. Richardeau, Z. Khatir, S. Lefebvre, and M. Berkani, Ageing and failure modes of IGBT modules in high-temperature power cycling. IEEE T. Ind. Electron. 58, 10 (2011).10.1109/TIE.2011.2114313 ↗
75. S. Su, F.J. Akkara, R. Thaper, A. Alkhazali, M. Hamasha, and S.D. Hamasha, A state-of-the-art review of fatigue life prediction models for solder joint. J. Electron. Packag. 141, 4 (2019).
76. O.E. Gabriel and D.R. Huitink, Failure mechanisms driven reliability models for power electronics: a review. J. Electron. Packag. 145, 2 (2023).10.1115/1.4055774 ↗
77. M. Calabretta, A. Sitta, S.M. Oliveri, and G. Sequenzia, Power semiconductor devices and packages: solder mechanical characterization and lifetime prediction. IEEE Access 9, 22859–22867 (2021).10.1109/ACCESS.2021.3056281 ↗