Wide-Angle and Polarization-Insensitive Symmetric Multiple Split Ring Metamaterial Absorber for Quad-Band Shielding
Source abstract
Abstract
A metamaterial absorber is designed using a multiple split-ring structure that has symmetrical circular edge splits. The absorber is polarization-insensitive and shows peak of absorption in the quad-band. To support the design, an FR-4 substrate is used. The dimensions of the absorber are 0.119 λ by 0.119 λ. Results show an absorption rate above 99% at 2.75 GHz, 5.04 GHz, and 13.9 GHz, with absorption of 96.7% at a frequency of 8.54 GHz. The structure exhibits the same absorption at transverse electromagnetic excitation modes. The angle-insensitivity of the absorber occurs up to 90°. The unique structure of the absorber can block unwanted electromagnetic interference with magnitudes of 40.82 dB, 49.12 dB, 28.43 dB, and 51.57 dB at frequencies of 2.73 GHz, 5.04 GHz, 8.54 GHz, and 14.12 GHz, respectively. The design is also verified using the HFSS (High Frequency Structure Simulator) program and validated in the ADS (Advanced Design System) environment, which also exhibits four satellite (S, C, X, and Ku) bands.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Antenna and Metasurface Technologies · Metamaterials and Metasurfaces Applications · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. T. Ramachandran, M.R.I. Faruque, and M.T. Islam, Dielectric passive left-handed symmetric metamaterial design for electromagnetic absorption reduction application. Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl. 236(11), 2157 (2022). https://doi.org/10.1177/1464420720985262.10.1177/1464420720985262 ↗
2. P. Lu, J. Gong, X. Liu, Y. Cao, A. Zhang, and S. Yan, ITO meta-absorber-loaded conformal UHF monopole antenna with wide-angel RCS reduction. Materials (Basel) (2025). https://doi.org/10.3390/ma18061379.10.3390/ma18061379 ↗
3. M.I. Jahan et al., Quad-band metamaterial perfect absorber with high shielding effectiveness using double X-shaped ring resonator. Materials (Basel) 16(12), 1 (2023). https://doi.org/10.3390/ma16124405.10.3390/ma16124405 ↗
4. A. Tripathi and K. S. Sandha, Broad microwave absorption bandwidth analysis of biocomposite microwave absorber material for X-band applications. Biomass Convers. Biorefinery, pp. 13977–13995, 2024, https://doi.org/10.1007/s13399-024-06157-1.10.1007/s13399-024-06157-1 ↗
5. K. Li, Y. Liang, Y. Liu, and Y.S. Lin, Tunable MEMS-based meta-absorbers for nondispersive infrared gas sensing applications. Microsyst. Nanoeng. (2025). https://doi.org/10.1038/s41378-024-00851-w.10.1038/s41378-024-00851-w ↗
6. Y. Gai, S. Zhou, and G. Lan, Ultra-broadband perfect metamaterial absorber for solar energy harvesting. Plasmonics (2024). https://doi.org/10.1007/s11468-024-02711-9.10.1007/s11468-024-02711-9 ↗
7. S. Goethals, S. Matz, F. Provost, D. Martens, and Y. Ramon, The impact of cloaking digital footprints on user privacy and personalization. Big Data (2025). https://doi.org/10.1089/big.2024.0036.10.1089/big.2024.0036 ↗
8. Z. Jan, A. Razzaq, A.A. Rahim, and K. Rahman, Design and analysis of X-band metamaterial absorber. MATEC Web Conf. 398, 01021 (2024). https://doi.org/10.1051/matecconf/202439801021.10.1051/matecconf/202439801021 ↗
9. A. Hussain, J. Dong, Y.I. Abdulkarim, A.S. Karim, and R. Shi, Design, fabrication, and characterization of a broadband metamaterial absorber for Ku-band applications. J. Electron. Mater. (2025). https://doi.org/10.1007/s11664-025-11962-z.10.1007/s11664-025-11962-z ↗
10. S. Zheng, M. Gu, G. Feng, M. Zheng, T. Zhao, and X. Jing, Design of a polarization-insensitive and wide-angle triple-band metamaterial absorber. Photonics (2025). https://doi.org/10.3390/photonics12040386.10.3390/photonics12040386 ↗
11. Y.H. Ren, J. Ding, C.J. Guo, Y. Qu, and Y.C. Song, Design of a quad-band wide-angle microwave metamaterial absorber. J. Electron. Mater. 46, 370–376 (2017). https://doi.org/10.1007/s11664-016-4852-3.10.1007/s11664-016-4852-3 ↗
12. M.I. Jahan, M.R.I. Faruque, M.B. Hossain, and S. Abdullah, An ultra-thin, triple-band, incident angle-insensitive perfect metamaterial absorber. Materials (Basel). (2023). https://doi.org/10.3390/ma16041623.10.3390/ma16041623 ↗
13. K. Kim, Y. Kim, E. Park, H. Jeong, and S. Lim, Frequency- and bandwidth-controllable electromagnetic absorber using 3D-printed shape memory meta-wires. Virtual Phys. Prototyp. 19(1), 1 (2024). https://doi.org/10.1080/17452759.2024.2351143.10.1080/17452759.2024.2351143 ↗
14. S. Rangasamy, A.M. Khansadurai, G. Venugopal, and A.K. Udayakumar, Graphene-based O-shaped metamaterial absorber design with broad response for solar energy absorption. Opt. Quantum Electron. 55(1), 1 (2023). https://doi.org/10.1007/s11082-022-04315.10.1007/s11082-022-04315 ↗
15. S. Hannan, M.T. Islam, A.F. Almutairi, and M.R.I. Faruque, Wide bandwidth angle- and polarization-insensitive symmetric metamaterial absorber for X and Ku band applications. Sci. Rep. 10(1), 1 (2020). https://doi.org/10.1038/s41598-020-67262-5.10.1038/s41598-020-67262-5 ↗
16. M.L. Hakim, T. Alam, A.F. Almutairi, M.F. Mansor, and M.T. Islam, Polarization insensitivity characterization of dual-band perfect metamaterial absorber for K band sensing applications. Sci. Rep. 11, 17829 (2021). https://doi.org/10.1038/s2341598-021-97395-0.10.1038/s2341598-021-97395-0 ↗
17. P.S. Gham, A. Priya, and R. Kumar, Advancing the efficiency of FTO/Sb:SnO2/FA0.85Cs0.15PbI2.70Br0.3/BaSi2 perovskite solar cells by incorporating Ce-doped ZnO ETL materials. Photonics Nanostruct. Fundam. Appl. 67, 101469 (2025). https://doi.org/10.1016/j.photonics.2025.101469.10.1016/j.photonics.2025.101469 ↗
18. P.S. Gham, A. Priya, and R. Kumar, Impact of Ce–ZnO: B ETL on enhancing the efficiency of double absorber material based CsFASnBr I₃/MAFASnBrI₃ perovskite solar cell. J. Phys. Chem. Solids 209, 113271 (2026). https://doi.org/10.1016/j.jpcs.2025.113271.10.1016/j.jpcs.2025.113271 ↗
19. Y.Z. Cheng, R.Z. Gong, Y. Nie, and X. Wang, A wideband metamaterial absorber based on magnetic resonator loaded with lumped resistors. Chin. Phys. B 21(12), 127801 (2012).10.1088/1674-1056/21/12/127801 ↗
20. O. Luukkonen, S.I. Maslovski, and S.A. Tretyakov, A stepwise Nicolson-Ross-Weir-based material parameter extraction method. IEEE Antennas Wirel. Propag. Lett. 10, 1295 (2011). https://doi.org/10.1109/LAWP.2011.2175897.10.1109/LAWP.2011.2175897 ↗
21. C. Barde, A. Choubey, R. Sinha, S.K. Mahto, and P. Ranjan, A compact wideband metamaterial absorber for Ku band applications. J. Mater. Sci. Mater. Electron. 31(19), 16898 (2020). https://doi.org/10.1007/s10854-020-04245-2.10.1007/s10854-020-04245-2 ↗
22. Q. F. Guo, Y. Q. Ma, X. L. Cui, and Y. Liu, “Rapid analysis of metamaterial structures using the discrete Maxwell’s equation method,” in Proc. 2012 International Conference on …, Oct. 2012, pp. 1-5.10.1109/META.2012.6464955 ↗
23. R.K. Mongia, I.J. Bahl, P. Bhartia, and S.J. Hong, RF and Microwave Coupled-Line Circuits, 2nd ed., (Norwood, MA, USA: Artech House, 2007), p.549.
24. B.D. Bala, S.M. Salisu, M.A. Yusuf Hotoro, and I.S. Madugu, Triangular Based Dual-band Metamaterial Absorber for C-band Applications. J. Sustain. Eng. Technol. 1(1), 54 (2024).
25. M.S.U. Afsar et al., A new octagonal close ring resonator based dumbbell-shaped tuning fork perfect metamaterial absorber for C- and Ku-band applications. Micromachines (2022). https://doi.org/10.3390/mi13020162.10.3390/mi13020162 ↗
26. N.T.Q. Hoa, P.D. Tung, N.D. Dung, H. Nguyen, and T.S. Tuan, Numerical study of a wide incident angle- and polarisation-insensitive microwave metamaterial absorber based on a symmetric flower structure. AIP Adv. 9(6), 1 (2019). https://doi.org/10.1063/1.5098005.10.1063/1.5098005 ↗
27. S.A. Mohammed, R.A.K. Albadri, and K.S.L. Al-Badri, Simulation of the microwave five-band a perfect metamaterial absorber for the 5G communication. Heliyon 9(9), e19466 (2023). https://doi.org/10.1016/j.heliyon.2023.e19466.10.1016/j.heliyon.2023.e19466 ↗
28. M. Moniruzzaman et al., Dual band polarization insensitive metamaterial absorber for EMI shielding from GSM and 5G communication systems. Sci. Rep. 15(1), 1 (2025). https://doi.org/10.1038/s41598-025-96507-4.10.1038/s41598-025-96507-4 ↗
29. M.B. Hossain, M.R.I. Faruque, M.T. Islam, M. Singh, and M. Jusoh, Double elliptical resonator based quadruple band metamaterial absorber for EMI shielding applications in microwave regime. Alex. Eng. J. 69, 193 (2023). https://doi.org/10.1016/j.aej.2023.01.035.10.1016/j.aej.2023.01.035 ↗
30. M.B. Hossain, M.R.I. Faruque, M.T. Islam, M. Singh, and M. Jusoh, Triple band microwave metamaterial absorber based on double E-shaped symmetric split ring resonators for EMI shielding and stealth applications. J. Market. Res. 18, 1653 (2022). https://doi.org/10.1016/j.jmrt.2022.03.079.10.1016/j.jmrt.2022.03.079 ↗