journal article·2026-05Open access

Crystal Plasticity Simulations of Subgrain Formation in Sn-based Solders During Thermal Cycling

Kai-chieh Chiang, Marisol Koslowski

Journal of Electronic Materials· Volume 55· Issue 5

Abstract

Abstract Tin-based solder joints are widely used to provide high-density interconnection in microelectronic packaging. Experiments show that under repetitive temperature cycling, subgrains may nucleate in the tin phase, contributing to early degradation. We present numerical simulations on a board-level packaging stack-up during cool-down and under thermal cycling. A crystal plasticity model and thermomechanical anisotropy are utilized to study the deformation of the solder joints. With this model, we can quantify the contributions to the deformation from the joint location versus the result of thermoelastic anisotropy during thermal cycling.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett, Current issues in recrystallization: a review. Mater. Sci. Eng.: A 238(2), 219–274 (1997).10.1016/S0921-5093(97)00424-3 ↗
2. R.J. Coyle, K. Sweatman, and B. Arfaei, Thermal fatigue evaluation of Pb-free solder joints: Results, lessons learned, and future trends. JOM 67(10), 2394–2415 (2015).10.1007/s11837-015-1595-1 ↗
3. J.W. Xian, Y.L. Xu, S. Stoyanov, R.J. Coyle, F.P.E. Dunne, and C.M. Gourlay, The role of microstructure in the thermal fatigue of solder joints. Nat. Commun. 15(1), 4258 (2024).10.1038/s41467-024-48532-6 ↗
4. J.B. Libot, J. Alexis, O. Dalverny, L. Arnaud, P. Milesi, and F. Dulondel, Microstructural evolutions of Sn-3.0Ag-0.5Cu solder joints during thermal cycling. Microelectron. Reliabil. 83, 64–76 (2018).10.1016/j.microrel.2018.02.009 ↗
5. Mohammad A. Gharaibeh, Numerical simulations of the influence of thermal cycling parameters on the mechanical response of SAC interconnects. J. Mechan. Behavior Mater. 34(1), 20250069 (2025).10.1515/jmbm-2025-0069 ↗
6. R. Coyle, D. Hillman, T. Pearson, M. Osterman, J. Smetana, K. Howell, J. Silk, H. Zhang, J. Geng, D. Daily, et al, A collaborative consortia project to assess the effect of thermal cycling dwell time on the reliability of high-performance solder alloys. Proceedings of SMTA International, (2023).
7. T.R. Bieler, B. Zhou, L. Blair, A. Zamiri, P. Darbandi, F. Pourboghrat, T.-K. Lee, and K.-C. Liu, The role of elastic and plastic anisotropy of Sn in recrystallization and damage evolution during thermal cycling in SAC305 solder joints. J. Electron. Mater. 41(2), 283–301 (2011).10.1007/s11664-011-1811-x ↗
8. E. B. Romdhane, P. Roumanille, A. Guédon-Gracia, S. Pin, P. Nguyen, and H. Frémont, From early microstructural evolution to intergranular crack propagation in SAC solders under thermomechanical fatigue. Microelectronics Reliability, 126:114288, (2021). Proceedings of ESREF 2021, 32nd European Symposium on Reliability of Electron Devices, Failure Physics and Analysis.10.1016/j.microrel.2021.114288 ↗
9. T. Gu, Y. Xu, C.M. Gourlay, and T.B. Britton, In-situ electron backscatter diffraction of thermal cycling in a single grain Cu/Sn-3Ag-0.5Cu/Cu solder joint. Scripta Materialia 175, 55–60 (2020).10.1016/j.scriptamat.2019.09.003 ↗
10. A. Zamiri, T.R. Bieler, and F. Pourboghrat, Anisotropic crystal plasticity finite element modeling of the effect of crystal orientation and solder joint geometry on deformation after temperature change. J. Elect. Mater. 38(2), 231–240 (2008).10.1007/s11664-008-0595-0 ↗
11. Xiaorong Cai, Carol A. Handwerker, John E. Blendell, and Marisol Koslowski, Shallow grain formation in Sn thin films. Acta Materialia 192, 1–10 (2020).10.1016/j.actamat.2020.03.014 ↗
12. Mingwei Xie, and Gang Chen, A developed crystal plasticity model for viscoplastic mechanical behavior of SAC305 solder under thermomechanical coupled cyclic loading. Int. J. Plast. 159, 103465 (2022).10.1016/j.ijplas.2022.103465 ↗
13. Y. Xu, J. Xian, S. Stoyanov, C. Bailey, R.J. Coyle, C.M. Gourlay, and F.P.E. Dunne, A multi-scale approach to microstructure-sensitive thermal fatigue in solder joints. Int. J. Plast. 155, 103308 (2022).10.1016/j.ijplas.2022.103308 ↗
14. Congying Wang, Xiaorong Cai, Marisol Koslowski, John Blendell, and Carol Handwerker, Whisker nucleation by slip-assisted grain rotation during thermal cycling. JOM 76(6), 2718–2730 (2024).10.1007/s11837-023-06366-5 ↗
15. D. Mondal, J. C. Suhling, and P. Lall, A crystal plasticity finite element modeling to explain the effects of $$\beta $$-sn crystal orientation on SAC305 solder ball deformation. In 2022 21st IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm), pages 1–7, (2022).10.1109/iTherm54085.2022.9899548 ↗
16. V.T. Deshpande, and D.B. Sirdeshmukh, Thermal expansion of tetragonal tin. Acta Crystallogr. 14(4), 355–356 (1961).10.1107/S0365110X61001212 ↗
17. D. Peirce, R.J. Asaro, and A. Needleman, Material rate dependence and localized deformation in crystalline solids. Acta Metallurgica 31(12), 1951–1976 (1983).10.1016/0001-6160(83)90014-7 ↗
18. P. Darbandi, T.R. Bieler, F. Pourboghrat, and T.-K. Lee, Crystal plasticity finite-element analysis of deformation behavior in multiple-grained lead-free solder joints. J. Elect. Mater. 42(2), 201–214 (2012).10.1007/s11664-012-2339-4 ↗
19. P. Darbandi, T.K. Lee, T.R. Bieler, and F. Pourboghrat, Crystal plasticity finite element study of deformation behavior in commonly observed microstructures in lead free solder joints. Computat. Mater. Sci. 85, 236–243 (2014).10.1016/j.commatsci.2014.01.002 ↗
20. Y. S. Touloukian, R. K. Kirby, R. E. Taylor, and P. D. Desai, Thermal Expansion: Metallic Elements and Alloys, 12. IFI/Plenum, New York, (1975).10.1007/978-1-4757-1622-1 ↗
21. Jui-Ching. Lin, Yi. Qin, and Julia Woertink, Investigation of the growth of intermetallic compounds between Cu pillars and solder caps. J. Electron. Mater. 43(11), 4134–4145 (2014).10.1007/s11664-014-3318-8 ↗
22. Xiaorong Cai, Andrew M. Pham, and Marisol Koslowski, Mechanical Failure of Cu-Sn Solder Joints. J. Elect. Mater. 50(10), 6006–6013 (2021).10.1007/s11664-021-09117-x ↗
23. L. B. Freund and S. Suresh, Thin Film Materials: Stress, Defect Formation and Surface Evolution. Cambridge University Press, (2004).10.1017/CBO9780511754715 ↗
24. M. S. Alam, M. Basit, J. C. Suhling, and P. Lall, Mechanical characterization of SAC305 lead free solder at high temperatures. In 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), pages 755–760, (2016).10.1109/ITHERM.2016.7517622 ↗
25. Jifeng Li, Ignacio Romero, and Javier Segurado, Development of a thermo-mechanically coupled crystal plasticity modeling framework: Application to polycrystalline homogenization. Int. J. Plast. 119, 313–330 (2019).10.1016/j.ijplas.2019.04.008 ↗
26. Y.F. Gao, B.C. Larson, J.H. Lee, L. Nicola, J.Z. Tischler, and G.M. Pharr, Lattice Rotation Patterns and Strain Gradient Effects in Face-Centered-Cubic Single Crystals Under Spherical Indentation. J. Appl. Mechan. 82(6), 061007 (2015).10.1115/1.4030403 ↗
27. M. Jahedi, M. Ardeljan, I.J. Beyerlein, M.H. Paydar, and M. Knezevic, Enhancement of orientation gradients during simple shear deformation by application of simple compression. J. Appl. Phys. 117(21), 214309 (2015).10.1063/1.4922032 ↗
28. G. Giudicelli, A. Lindsay, L. Harbour, C. Icenhour, M. Li, J. E. Hansel, P. German, P. Behne, O. Marin, R. H. Stogner, J. M. Miller, D. Schwen, Y. Wang, L. Munday, S. Schunert, B. W. Spencer, D. Yushu, A. Recuero, Z. M. Prince, M. Nezdyur, T. Hu, Y. Miao, Y. S. Jung, C. Matthews, A. Novak, B. Langley, T. Truster, N. Nobre, B. Alger, D. Andrš, F. Kong, R. Carlsen, A. E. Slaughter, J. W. Peterson, D. Gaston, and C. Permann, 3.0 - MOOSE: Enabling massively parallel multiphysics simulations. SoftwareX, 26:101690, (2024).10.1016/j.softx.2024.101690 ↗
29. C. Chen, J. C. Suhling, and P. Lall, Comparison of FEA modeling techniques for plastic ball grid array assemblies. 2018 IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), pages 1195–1206, (2018).10.1109/ITHERM.2018.8419498 ↗