journal article·2026-05Open access

Impact of Heavy, Large-Radius Metal Doping on the Performance of BiSbTe Compounds

C. Boyraz, Tugce Maras, Sedat Ballikaya

Journal of Electronic Materials· Volume 55· Issue 5

Abstract

Abstract In this study, the structural and transport properties of BiSbTe compounds doped with boron (B), barium (Ba), and ytterbium (Yb) via partial substitution of Bi atoms were systematically investigated. B-, Ba-, and Yb-doped Bi 2− x Te 3 and Sb 1.5 Bi 0.5− x Te 3 samples ( x = 0–0.5) were successfully synthesized via a fast and cost-effective process, mechanical alloying followed by cold pressing and sintering. Structural characterization using powder x-ray diffraction (PXRD) and scanning electron microscopy (SEM) confirmed highly textured, layered structures consistent with Bi 2 Te 3 and Sb 2 Te 3 , except in samples with x = 0.5. Transport measurements showed that increasing dopant concentration decreased the Seebeck coefficient while increasing electrical conductivity, attributed to electron donation from B, Ba, and Yb atoms. Thermal conductivity also increased with dopant content, likely owing to enhanced electronic contributions. The maximum thermoelectric figure of merit ( ZT ) of 1.1 was achieved for Bi 1.9 Yb 0.1 Te 3 and Sb 1.5 Bi 0.4 B 0.1 Te 3 at 373 K. Boron proved more effective for p -type BiSbTe, whereas ytterbium was superior for n -type compounds. ZT improved by at least 15% for p -type and 30% for n -type BiSbTe compared with pristine samples. These results indicate that substituting Bi atoms with metals of high electronegativity and larger atomic radii effectively tunes transport properties and enhances the thermoelectric performance of BiSbTe compounds.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Topological Materials and Phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. D.M. Rowe, Thermoelectric Handbook: Macro to Nano, CRC Press (Boca Raton, FL: Taylor & Francis, 2006).
2. R. Cheng, H. Ge, S. Huang, S. Xie, Q. Tong, H. Sang, F. Yan, L. Zhu, R. Wang, Y. Liu, and M. Hong, Sci. Adv. 10, 959 (2024).
3. R. Başar, B.C. Sevik, and S. Turan, J. Eur. Ceram. Soc. 46, 118141 (2026).10.1016/j.jeurceramsoc.2026.118141 ↗
4. S. Li, D. Ma, Y. Zhang, B. Li, Z. Wang, and J. Zhang, Adv. Funct. Mater. 12, e18429 (2025).
5. T. Gong, C. Ma, L. Li, L. Gao, L. Cao, M. Shi, J. Li, and W. Su, ACS Appl. Mater. Interfaces 17, 11 (2025).
6. R.B. Boz, C. Sevik, and S. Turan, J. Solid State Chem. 348, 125395 (2025).10.1016/j.jssc.2025.125395 ↗
7. GA Slack, in CRC Handbook of Thermoelectricity, ed. D. M. Rowe, CRC Press, Boca Raton, 1995, p. 407
8. B.C. Sales, D. Mandrus, and R.K. Williams, Science 272, 1325 (1996).10.1126/science.272.5266.1325 ↗
9. K.F. Hsu, S. Loo, F. Guo, W. Chen, J.S. Dyck, C. Uher, T. Hogan, E.K. Polychroniadis, and M.G. Kanatzidis, Science 303, 818 (2004).10.1126/science.1092963 ↗
10. C. Uher, Materials Aspects of Thermoelectricity, CRC Press, 201610.1201/9781315197029 ↗
11. M.S. Dresselhaus, G. Chen, and Z. Ren, Science 320, 634 (2008).10.1126/science.1156446 ↗
12. J.P. Heremans, V. Jovovic, E.S. Toberer, A. Saramat, K. Kurosaki, A. Charoenphakdee, S. Yamanaka, and G.J. Snyder, Science 321, 554 (2008).10.1126/science.1159725 ↗
13. Y.Z. Pei, X. Shi, A. LaLonde, H. Wang, L.D. Chen, and G.J. Snyder, Nature 473, 66 (2011).10.1038/nature09996 ↗
14. W. Liu, X. Tan, K. Yin, H. Liu, X. Tang, J. Shi, Q. Zhang, and C. Uher, Phys. Rev. Lett. 108, 166601 (2012).10.1103/PhysRevLett.108.166601 ↗
15. D.T. Morelli, V. Jovovic, and J.P. Heremans, Phys. Rev. Lett. 101, 035901 (2008).10.1103/PhysRevLett.101.035901 ↗
16. H. Li, X. Tang, Q. Zhang, and C. Uher, Appl. Phys. Lett. 93, 252109 (2009).10.1063/1.3054158 ↗
17. H. Liu, X. Shi, F. Xu, L. Zhang, W. Zhang, L. Chen, Q. Li, C. Uher, T. Day, and G.J. Snyder, Nat. Mater. 11, 422 (2012).10.1038/nmat3273 ↗
18. A.S. Arvij, J.H. Ross, S. Ballikaya, and C. Uher, The Journ. Physc. Chem. 120, 14549 (2016).
19. A. Yusuf, and S. Ballikaya, Appl. Sci. 10, 408 (2020).10.3390/app10010408 ↗
20. S. Ballikaya, M. Sertkol, Y. Öner, T. Bailey, and C. Uher, Phys. Chem. Chem. Phy. 21, 13569 (2019).10.1039/C9CP00793H ↗
21. S. Ballikaya, T. Temel, B. Özkal, Y. Öner, M. Toprak, T. Bailey, and C. Uher, J. Solid State Chem. 273, 122 (2019).10.1016/j.jssc.2019.02.037 ↗
22. H. J. Goldsmid, Introduction to Thermoelectricity, 2009, Springer.10.1007/978-3-642-00716-3 ↗
23. J.P. Heremans, Nature 508, 327 (2014).10.1038/508327a ↗
24. B. Hamawandi, H. Mansouri, S. Ballikaya, Y. Demirci, M. Orlovska, N. Bolghanabadi, S.A. Sajjadi, and M. Toprak, Front. Mater. 7, 332 (2020).10.3389/fmats.2020.569723 ↗
25. B. Hamawandi, S. Ballikaya, H. Batili, V. Roosmark, M. Orlovská, A. Yusuf, M. Johnsson, R. Szukiewicz, M. Kuchowicz, and M. Toprak, Appl. Sci. 10, 1178 (2020).10.3390/app10031178 ↗
26. B. Madavalia, D.W. Shina, D.S. Kimb, and S.J. Hong, Intermetallics 105, 139 (2019).10.1016/j.intermet.2018.11.017 ↗
27. W.Y. Lyu, W.D. Liu, M. Li, M. Hong, K. Guo, J. Luo, J. Xing, Q. Sun, S. Xu, J. Zou, and Z.G. Chen, Chem. Eng. J. 446, 137278 (2022).10.1016/j.cej.2022.137278 ↗
28. Y. Li, P. Qiu, H. Duan, J. Chen, G.J. Snyder, X. Shi, B.B. Iversen, and L. Chen, J. Mater. Chem. C. 4, 4374 (2016).10.1039/C6TC01000H ↗
29. C. Suryanarayana, Mechanical alloying and milling. Prog. Mater. Sci. 46, 1 (2001).10.1016/S0079-6425(99)00010-9 ↗
30. O. Park, S.J. Park, H.-S. Kim, S.W. Lee, M. Heo, and S.-I. Kim, Mater. Sci. Semicond. Process. 166, 107723 (2023).10.1016/j.mssp.2023.107723 ↗
31. X. Guan, Z. Liu, N. Ma, Z. Li, J. Liu, H. Zhang, H. Li, Q. Ba, J. Ma, C. Jin, and A. Xia, Acta Metall. Sin. (Engl. Lett.). 38(5), 849–858 (2025).10.1007/s40195-024-01794-x ↗
32. Y. Wang, X. Li, Z. Chen, and H. Zhao, J. Alloys Compd. 778, 123–130 (2019).
33. L.-Y. Lou, J. Yang, Y.-K. Zhu, H. Liang, Y.-X. Zhang, J. Feng, J. He, Z.-H. Ge, and L.-D. Zhao, Adv. Sci. 9, 2203250 (2022).10.1002/advs.202203250 ↗