Addressing an Anomalous Melting Temperature-Strength Trend with Enhanced Compressive Performance of In-Micro-Alloyed Sn-0.7Cu Solder
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. H. Fallahi, M.S. Nurulakmal, A.F. Arezodar, and J. Abdullah, Effect of iron and indium on IMC formation and mechanical properties of lead-free solder. Mater. Sci. Eng. A 553, 22 (2012). https://doi.org/10.1016/j.msea.2012.05.086.10.1016/j.msea.2012.05.086 ↗
2. A. Luktuke, A.S.S. Singaravelu, A. Mannodi-Kanakkithodi, and N. Chawla, Influence of indium addition on microstructural and mechanical behavior of Sn solder alloys: Experiments and first principles calculations. Acta Mater. (2023). https://doi.org/10.1016/j.actamat.2023.118853.10.1016/j.actamat.2023.118853 ↗
3. R. Sayyadi, and H. Naffakh-Moosavy, The role of intermetallic compounds in controlling the microstructural, physical and mechanical properties of Cu-[Sn-Ag-Cu-Bi]-Cu solder joints. Sci. Rep. 9, 1–20 (2019). https://doi.org/10.1038/s41598-019-44758-3.10.1038/s41598-019-44758-3 ↗
4. Y.H. Ko, J.D. Lee, T. Yoon, C.W. Lee, and T.S. Kim, Controlling interfacial reactions and intermetallic compound growth at the interface of a lead-free solder joint with layer-by-layer transferred graphene. ACS Appl. Mater. Interfaces 8, 5679 (2016). https://doi.org/10.1021/acsami.5b11903.10.1021/acsami.5b11903 ↗
5. M. Abtew, and G. Selvaduray, Lead-free solders in microelectronics. Mater. Sci. Eng. R Reports. 27, 95 (2000). https://doi.org/10.1016/S0927-796X(00)00010-3.10.1016/S0927-796X(00)00010-3 ↗
6. S. Santra, T. Davies, G. Matthews, J. Liu, C.R.M. Grovenor, and S.C. Speller, The effect of the size of NbTi filaments on interfacial reactions and the properties of InSn-based superconducting solder joints. Mater. Des. 176, 107836 (2019). https://doi.org/10.1016/j.matdes.2019.107836.10.1016/j.matdes.2019.107836 ↗
7. S. Santra, S. Islam, R. Ravi, V. Vuorinen, T. Laurila, and A. Paul, Phase evolution in the AuCu/Sn system by solid-state reactive diffusion. J. Electron. Mater. 43, 3357–3371 (2014). https://doi.org/10.1007/s11664-014-3241-z.10.1007/s11664-014-3241-z ↗
8. G. Ren, and M.N. Collins, Improved reliability and mechanical performance of Ag microalloyed Sn58Bi solder alloys. Metals 9(4), 462 (2019). https://doi.org/10.3390/met9040462.10.3390/met9040462 ↗
9. J.W. Kim, and S.B. Jung, Characterization of the shear test method with low melting point In-48Sn solder joints. Mater. Sci. Eng. A 397, 145–152 (2005). https://doi.org/10.1016/j.msea.2005.02.040.10.1016/j.msea.2005.02.040 ↗
10. E.P. Wood, and K.L. Nimmo, In search of new lead-free electronic solders. J. Electron. Mater. 23, 709–713 (1994). https://doi.org/10.1007/BF02651363.10.1007/BF02651363 ↗
11. A. Sharif, and Y.C. Chan, Effect of indium addition in Sn-rich solder on the dissolution of Cu metallization. J. Alloys Compd. 390, 67–73 (2005). https://doi.org/10.1016/j.jallcom.2004.08.023.10.1016/j.jallcom.2004.08.023 ↗
12. K. Shimizu, T. Nakanishi, K. Karasawa, K. Hashimoto, and K. Niwa, Solder joint reliability of indium-alloy interconnection. J. Electron. Mater. 24, 39–45 (1995). https://doi.org/10.1007/BF02659725.10.1007/BF02659725 ↗
13. L.F. Li, Y.K. Cheng, G.L. Xu, E.Z. Wang, Z.H. Zhang, and H. Wang, Effects of indium addition on properties and wettability of Sn-0.7Cu-0.2Ni lead-free solders. Mater. Des. 64, 15–20 (2014). https://doi.org/10.1016/j.matdes.2014.07.035.10.1016/j.matdes.2014.07.035 ↗
14. M.B. Kelly, S. Niverty, and N. Chawla, Electromigration in Bi-crystal pure Sn solder joints: Elucidating the role of grain orientation. J. Alloys Compd. (2020). https://doi.org/10.1016/j.jallcom.2019.152918.10.1016/j.jallcom.2019.152918 ↗
15. J. Hah, Y. Kim, P. Fernandez-Zelaia, S. Hwang, S. Lee, L. Christie, P. Houston, S. Melkote, K.S. Moon, and C.P, Wong, Comprehensive comparative analysis of microstructure of Sn–Ag–Cu (SAC) solder joints by traditional reflow and thermo-compression bonding (TCB) processes. Materialia (2019). https://doi.org/10.1016/j.mtla.2019.100327.10.1016/j.mtla.2019.100327 ↗
16. S. Tian, S. Li, J. Zhou, and F. Xue, Thermodynamic characteristics, microstructure and mechanical properties of Sn-0.7Cu-xIn lead-free solder alloy. J. Alloys Compd. 742, 835–843 (2018). https://doi.org/10.1016/j.jallcom.2018.01.386.10.1016/j.jallcom.2018.01.386 ↗
17. D. Jaiswal, V. Singh, D. Pathote, and C.K. Behera, Electrochemical behaviour of lead-free Sn–07Cu–xIn solders alloys in 3.5 wt% NaCl solution. J. Mater. Sci. Mater. Electron. 32, 23371–23384 (2021). https://doi.org/10.1007/s10854-021-06824-3.10.1007/s10854-021-06824-3 ↗
18. A. Yang, K. Xiao, Y. Duan, C. Li, J. Yi, M. Peng, and L. Shen, Effect of indium on microstructure, mechanical properties, phase stability and atomic diffusion of Sn-0.7Cu solder: Experiments and first-principles calculations. Mater. Sci. Eng. A 855, 143938 (2022). https://doi.org/10.1016/j.msea.2022.143938.10.1016/j.msea.2022.143938 ↗
19. J.C. Liu, G. Zhang, Z.H. Wang, J.S. Ma, and K. Suganuma, Thermal property, wettability and interfacial characterization of novel Sn-Zn-Bi-In alloys as low-temperature lead-free solders. Mater. Des. 84, 331–339 (2015). https://doi.org/10.1016/j.matdes.2015.06.148.10.1016/j.matdes.2015.06.148 ↗
20. Y.Q. Cheng, H.W. Sheng, and E. Ma, Relationship between structure, dynamics, and mechanical properties in metallic glass-forming alloys, Phys. Rev. B - Condens. Matter Mater. Phys. 78, 1–7 (2008). https://doi.org/10.1103/PhysRevB.78.014207.10.1103/PhysRevB.78.014207 ↗
21. Y. Hao, J. Gao, Y. Lv, and J. Liu, Low melting point alloys enabled stiffness tunable advanced materials. Adv. Funct. Mater. 32, 1–25 (2022). https://doi.org/10.1002/adfm.202201942.10.1002/adfm.202201942 ↗
22. J.F. Fatriansyah, I. Suhariadi, H.A. Fauziyyah, I.R. Syukran, F. Hartoyo, D. Dhaneswara, Z. Lockman, A. Fauzi, and M.S. Rohman, Prediction and optimization of mechanical properties of Ni based and Fe–Ni based super alloys via neural network approach with alloying composition parameter. J. Mater. Res. Technol. 24, 4168–4176 (2023). https://doi.org/10.1016/j.jmrt.2023.04.065.10.1016/j.jmrt.2023.04.065 ↗
23. K. Kanlayasiri, M. Mongkolwongrojn, and T. Ariga, Influence of indium addition on characteristics of Sn-0.3Ag-0.7Cu solder alloy. J. Alloys Compd. 485, 225–230 (2009). https://doi.org/10.1016/j.jallcom.2009.06.020.10.1016/j.jallcom.2009.06.020 ↗
24. K. Kanlayasiri, and K. Sukpimai, Effects of indium on the intermetallic layer between low-Ag SAC0307-xIn lead-free solders and Cu substrate. J. Alloys Compd. 668, 169–175 (2016). https://doi.org/10.1016/j.jallcom.2016.01.231.10.1016/j.jallcom.2016.01.231 ↗
25. H.T. Lee, C.Y. Lee, F.F. Lee, Y.F. Chen, and Y.H. Lee, Microstructural evolution of Sn-Ag-Sb solder with indium additions. J. Electron. Mater. 38, 2112–2121 (2009). https://doi.org/10.1007/s11664-009-0884-2.10.1007/s11664-009-0884-2 ↗
26. U. Lee, and J.W. Bae, Microstructural changes and mechanical properties of precipitation-strengthened medium-entropy Fe71.25(CoCrMnNi)23.75Cu3Al2 maraging Alloy. Materials (Basel). (2023). https://doi.org/10.3390/ma16093589.10.3390/ma16093589 ↗
27. Y.J. Zhou, Y. Zhang, Y.L. Wang, and G.L. Chen, Microstructure and compressive properties of multicomponent Alx(TiVCrMnFeCoNiCu)100–x high-entropy alloys. Mater. Sci. Eng. A 454–455, 260–265 (2007). https://doi.org/10.1016/j.msea.2006.11.049.10.1016/j.msea.2006.11.049 ↗
28. X.J. Liu, H.S. Liu, I. Ohnuma, R. Kainuma, K. Ishida, and S. Itabashi, Experimental Determination and Thermodynamic Calculation of the Phase Equilibria in the Cu-In-Sn. System 30, 1093–1103 (2001).
29. W. Liu, Y. Huan, J. Dong, Y. Dai, and D. Lan, A correction method of elastic modulus in compression tests for linear hardening materials. MRS Commun. 5, 641–645 (2015). https://doi.org/10.1557/mrc.2015.76.10.1557/mrc.2015.76 ↗
30. J.H.L. Pang, Lead free solder: mechanics and reliaility, 1st ed., (New York: Springer, 2012).10.1007/978-1-4614-0463-7 ↗
31. A. Thakur, J. Jain, and S. Santra, Effect of individual and synergistic alloying of In and Ni on microstructure, phase stability and thermal properties of lead-free Sn-0.7Cu solder. Philos. Mag. 104(24), 1207–1229 (2024). https://doi.org/10.1080/14786435.2024.2383771.10.1080/14786435.2024.2383771 ↗
32. H. Pan, Y. He, and X. Zhang, Interactions between dislocations and boundaries during deformation. Materials (Basel). 14, 1–48 (2021). https://doi.org/10.3390/ma14041012.10.3390/ma14041012 ↗
33. N. Hansen, Hall-Petch relation and boundary strengthening. Scr. Mater. 51, 801–806 (2004). https://doi.org/10.1016/j.scriptamat.2004.06.002.10.1016/j.scriptamat.2004.06.002 ↗
34. M.A. Fazal, N.K. Liyana, S. Rubaiee, and A. Anas, A critical review on performance, microstructure and corrosion resistance of Pb-free solders. Meas. J. Int. Meas. Confed. 134, 897–907 (2019). https://doi.org/10.1016/j.measurement.2018.12.051.10.1016/j.measurement.2018.12.051 ↗
35. A.A. El-Daly, A.E. Hammad, G.S. Al-Ganainy, and M. Ragab, Influence of Zn addition on the microstructure, melt properties and creep behavior of low Ag-content Sn-Ag-Cu lead-free solders. Mater. Sci. Eng. A 608, 130–138 (2014). https://doi.org/10.1016/j.msea.2014.04.070.10.1016/j.msea.2014.04.070 ↗
36. M.S. Gumaan, R.M. Shalaby, M.K. Mohammed Yousef, E.A.M. Ali, and E.E. Abdel-Hady, Nickel effects on the structural and some physical properties of the eutectic Sn-Ag lead-free solder alloy. Solder. Surf. Mt. Technol. 31, 40–51 (2019). https://doi.org/10.1108/SSMT-03-2018-0009.10.1108/SSMT-03-2018-0009 ↗
37. Z.C. Cordero, B.E. Knight, and C.A. Schuh, Six decades of the Hall-Petch effect – a survey of grain-size strengthening studies on pure metals. Int. Mater. Rev. 61, 495–512 (2016). https://doi.org/10.1080/09506608.2016.1191808.10.1080/09506608.2016.1191808 ↗
38. L.C. Tsao, C.H. Huang, C.H. Chung, and R.S, Chen, Influence of TiO2 nanoparticles addition on the microstructural and mechanical properties of Sn0.7Cu nano-composite solder. Mater. Sci. Eng. A 545, 194–200 (2012). https://doi.org/10.1016/j.msea.2012.03.025.10.1016/j.msea.2012.03.025 ↗
39. X. Wang, S. Zhang, J. Zhang, S. Cai, N. Liu, and Y.L. Wang, A synchronous improvement of strength and elongation caused by solid solution in low-silver SAC solder with superior necking resistance properties. J. Mater. Res. Technol. 33, 6397–6407 (2024). https://doi.org/10.1016/j.jmrt.2024.10.208.10.1016/j.jmrt.2024.10.208 ↗
40. P. Sungkhaphaitoon, and S. Chantaramanee, Effects of indium content on microstructural, mechanical properties and melting temperature of SAC305 Solder Alloys. Russ. J. Non-Ferrous Met. 59, 385–392 (2018). https://doi.org/10.3103/S1067821218040120.10.3103/S1067821218040120 ↗
41. X.L. Ren, Y.P. Wang, Y.Q. Lai, S.Y. Shi, X.Y. Liu, L.J. Zou, and N. Zhao, Effects of In addition on microstructure and properties of SAC305 solder, Trans. Nonferrous Met. Soc. China, English Ed. 33, 3427–3438 (2023). https://doi.org/10.1016/S1003-6326(23)66344-7.10.1016/S1003-6326(23)66344-7 ↗
42. K. Sambhava, P. Nautiyal, and J. Jain, Model based phenomenological and experimental investigation of nanoindentation creep in pure Mg and AZ61 alloy. Mater. Des. 105, 142–151 (2016). https://doi.org/10.1016/j.matdes.2016.05.036.10.1016/j.matdes.2016.05.036 ↗
43. J.C. Slater, Atomic radii in crystals. J. Chem. Phys. 41, 3199–3204 (1964). https://doi.org/10.1063/1.1725697.10.1063/1.1725697 ↗
44. W.F. Cheng, X.Y. Liu, C. Tan, Q.R. Yao, J. Wang, G.H. Rao, and H.Y. Zhou, Experimental determination and thermodynamic calculation of phase equilibria in the Sn-Fe-B ternary system. Calphad Comput. Coupling Phase Diagrams Thermochem. 85, 1093–1103 (2024). https://doi.org/10.1016/j.calphad.2024.102706.10.1016/j.calphad.2024.102706 ↗
45. R.L. Fleischer, Substitutional solution hardening. Acta Metall. 11, 203–209 (1963). https://doi.org/10.1016/0001-6160(63)90213-X.10.1016/0001-6160(63)90213-X ↗
46. R. Labusch, A Statistical Theory of Solid Solution Hardening. Phys. Status Solidi 41, 659–669 (1970). https://doi.org/10.1002/pssb.19700410221.10.1002/pssb.19700410221 ↗
47. Y. Tian, J. Gao, Y. Li, J. Chen, Y. Jung, and X. Dong, Effect of Sn element on the interfacial reinforced AlN/Cu joint brazed by Ag–Cu–Ti–(Snx) filler. J. Mater. Sci. Mater. Electron. 35, 1–14 (2024). https://doi.org/10.1007/s10854-024-12646-w.10.1007/s10854-024-12646-w ↗
48. P.T. Vianco, J.A. Rejent, and J.J. Martin, The compression stress-strain behavior of Sn-Ag-Cu solder. Jom. 55, 50–55 (2003). https://doi.org/10.1007/s11837-003-0141-8.10.1007/s11837-003-0141-8 ↗
49. P. Vianco, J. Rejent, I. Artaki, U. Ray, D. Finley, and A. Jackson, Compatibility of lead-free solders with lead containing surface finishes as a reliability issue in electronic assemblies. Proc. - Electron. Components Technol. Conf. (1996). https://doi.org/10.1109/ectc.1996.550885.10.1109/ectc.1996.550885 ↗
50. P.T. Vianco, J.A. Rejent, A.F. Fossum, and M.K. Neilsen, Compression stress-strain and creep properties of the 52In-48Sn and 97In-3Ag low-temperature Pb-free solders. J. Mater. Sci. Mater. Electron. 18, 93–119 (2007). https://doi.org/10.1007/s10854-006-9013-7.10.1007/s10854-006-9013-7 ↗
51. J. Zhao, L. Qi, X.M. Wang, and L. Wang, Influence of Bi on microstructures evolution and mechanical properties in Sn-Ag-Cu lead-free solder. J. Alloys Compd. 375, 196–201 (2004). https://doi.org/10.1016/j.jallcom.2003.12.005.10.1016/j.jallcom.2003.12.005 ↗
52. K. Ma, H. Wen, T. Hu, T.D. Topping, D. Isheim, D.N. Seidman, E.J. Lavernia, and J.M. Schoenung, Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy. Acta Mater. 62, 141–155 (2014). https://doi.org/10.1016/j.actamat.2013.09.042.10.1016/j.actamat.2013.09.042 ↗
53. L. Liu, Y. Yao, and T. Zeng, A micromechanical analysis to the elasto-viscoplastic behavior of solder alloys. Int. J. Solids Struct. 159, 211–220 (2019). https://doi.org/10.1016/j.ijsolstr.2018.10.003.10.1016/j.ijsolstr.2018.10.003 ↗
54. X. Lu, L. Zhang, C. Chen, and X. Wang, Microstructure and orientation evolution of β-Sn and interfacial Cu6Sn5 IMC grains in SAC105 solder joints modified by Si3N4 nanowires. J. Mater. Res. Technol. 26, 4723–4738 (2023). https://doi.org/10.1016/j.jmrt.2023.08.186.10.1016/j.jmrt.2023.08.186 ↗
55. N.J. Li, X.N. Li, Z.M. Li, Q.X. Yu, Y.H. Zheng, Y.L. Hu, Q. Wang, C. Dong, X. Jiang, and X.W. Zhang, Intermetallics differential effects of Zn and Co solutes on the properties of Cu – Ni – Sn alloys. Intermetallics (2020). https://doi.org/10.1016/j.intermet.2020.106894.10.1016/j.intermet.2020.106894 ↗
56. O. Waseda, R.G. Veiga, J. Morthomas, P. Chantrenne, C.S. Becquart, F. Ribeiro, A. Jelea, H. Goldenstein, and M. Perez, Formation of carbon Cottrell atmospheres and their effect on the stress field around an edge dislocation. Scr. Mater. 129, 16–19 (2017). https://doi.org/10.1016/j.scriptamat.2016.09.032.10.1016/j.scriptamat.2016.09.032 ↗
57. Z. Xiong, I. Timokhina, and E. Pereloma, Clustering, nano-scale precipitation and strengthening of steels. Prog. Mater. Sci. 118, 100764 (2021). https://doi.org/10.1016/j.pmatsci.2020.100764.10.1016/j.pmatsci.2020.100764 ↗
58. H. Zhang, Q. Zhang, and Z. Song, Influences of low In alloying and aging on microstructure and plastic deformation behavior of Sn-58Bi solder. J. Mater. Sci. Mater. Electron. 35, 1–12 (2024). https://doi.org/10.1007/s10854-024-13017-1.10.1007/s10854-024-13017-1 ↗
59. Q.L. Zeng, Z.G. Wang, A.I.P. Xian, and J.K. Shang, Cyclic softening of the Sn-3.8Ag-0.7Cu lead-free solder alloy with equiaxed grain structure. J. Electron. Mater. 34, 62–67 (2005). https://doi.org/10.1007/s11664-005-0181-7.10.1007/s11664-005-0181-7 ↗