journal article·2026-08Open access

Acoustic Power Transfer Along Metal Surfaces by Audio Transducers

Ippokratis Kochliaridis, Michail E. Kiziroglou

Journal of Electronic Materials· Volume 55· Issue 8

Abstract

Abstract Acoustic power transfer is a promising method for providing power to sensing microsystems installed in locations in which battery replacement, wiring, or energy harvesting from ambient energy is impractical or limited. In this paper, an evaluation of acoustic power transfer along metal surfaces is presented. Commercial audio band magnetostrictive and piezoelectric transducers are used as the transmitter and the receiver, respectively. The study was performed on a 1 m long, 0.5 mm wide, and 3 mm thick aluminum plate, emulating industrial infrastructure or vehicle panels. A power delivery of 44 μW is demonstrated at a 0.8 m transmitter–receiver distance, at a setup-specific 3.64 kHz resonance frequency. The corresponding open-circuit voltage amplitude is over 0.7 V, which is adequate for efficient power management. The receiver mass and volume are 1.57 g and 200 mm 3 respectively, yielding 200 μW/cm 3 and 25 μW/g power density. This power density is adequate for supporting low-power wireless sensor platforms by integration of acoustic piezoelectric receivers with an acceptable volume overhead compared with the size of typical sensor nodes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Wireless Power Transfer Systems · Innovative Energy Harvesting Technologies · Acoustic Wave Resonator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. O. Imoru, A. Jassal, H. Polinder, E. Nieuwkoop, J. Tsado, and A. A. Jimoh, “An inductive power transfer through metal object,” in 2013 1st International Future Energy Electronics Conference (IFEEC), 2013, pp. 246-251: IEEE.10.1109/IFEEC.2013.6687511 ↗
2. N. Garraud, B. Alessandri, P. Gasnier, D. Arnold, and S. Boisseau, “Optimization of a magnetodynamic receiver for versatile low-frequency wireless power transfer,” in 2019 19th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS), 2019, pp. 1-6: IEEE.10.1109/PowerMEMS49317.2019.71805306097 ↗
3. O. Freychet, F. Frassati, S. Boisseau, N. Garraud, P. Gasnier, and G. Despesse, Analytical optimization of piezoelectric acoustic power transfer systems. Eng. Res. Express 2(4), 045022 (2020).10.1088/2631-8695/abcb4a ↗
4. O. Freychet et al., “Piezoelectric stacks to increase the transmitted power of acoustic power transfer through metal walls,” in 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS), Electr Network, 2021, pp. 48-51, 2021.10.1109/PowerMEMS54003.2021.9658389 ↗
5. M. Kiziroglou, D. Boyle, S. Wright, and E. Yeatman, Acoustic power delivery to pipeline monitoring wireless sensors. Ultrasonics 77, 54–60 (2017).10.1016/j.ultras.2017.01.017 ↗
6. A. Denisov and E. Yeatman, “Ultrasonic vs. inductive power delivery for miniature biomedical implants,” in Body Sensor Networks (BSN), 2010 International Conference on, 2010, pp. 84-89.10.1109/BSN.2010.27 ↗
7. H. Basaeri, D. B. Christensen, and S. Roundy, “A review of acoustic power transfer for biomedical implants,” Smart Materials and Structures, vol. 25, no. 12, Dec 2016, Art. no. 123001.10.1088/0964-1726/25/12/123001 ↗
8. S. Q. Lee, W. Youm, and G. Hwang, “Biocompatible wireless power transferring based on ultrasonic resonance devices,” in Proceedings of meetings on acoustics, 2013, vol. 19, no. 1: AIP Publishing.10.1121/1.4800386 ↗
9. H. Basaeri, Y. Yu, D. Young, and S. Roundy, Acoustic power transfer for biomedical implants using piezoelectric receivers: effects of misalignment and misorientation. J Micromec Microengineering 29(80), 084004 (2019).10.1088/1361-6439/ab257f ↗
10. K. Wilt, H. Scarton, G. Saulnier, T. Lawry, and J. Ashdown, “High-power operation of acoustic-electric power feedthroughs through thick metallic barriers,” in ASME International Mechanical Engineering Congress and Exposition, 2012, vol. 45288, pp. 475-482: American Society of Mechanical Engineers.10.1115/IMECE2012-89496 ↗
11. A. Kural et al., Design and characterization of an ultrasonic lamb-wave power delivery system. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 60(6), 1134–1140 (2013).10.1109/TUFFC.2013.2676 ↗
12. M. E. Kiziroglou, D. E. Boyle, S. W. Wright, and E. M. Yeatman, “Acoustic energy transmission in cast iron pipelines,” in Journal of Physics: Conference Series, 2015, vol. 660, no. 1, p. 012095: IOP Publishing.10.1088/1742-6596/660/1/012095 ↗
13. A.S. Holmes et al., Minimally Invasive Online Water Monitor. IEEE Internet Things J. 9(16), 14325–14335 (2021).10.1109/JIOT.2021.3074081 ↗
14. I. T. U. (ITU), “Nomenclature of the frequency and wavelength bands used in telecommunications,” International Telecommunication Union (ITU), Geneva, Switzerland 1985, 1985.
15. H. Yang, M. Wu, Z. Yu, and J. Yang, An ultrasonic through-metal-wall power transfer system with regulated DC output. Appl. Sci. 8(5), 692 (2018).10.3390/app8050692 ↗
16. B. Cotte, C. Lafon, C. Dehollain, and J.-Y. Chapelon, Theoretical study for safe and efficient energy transfer to deeply implanted devices using ultrasound. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 59(8), 1674–1685 (2012).10.1109/TUFFC.2012.2373 ↗
17. Y.-C. Lin, M.-C. Chiang, and J.-H. Chen, “A wireless sensor utilizing ultrasound for wireless power and data transmission,” in 2017 IEEE Wireless Power Transfer Conference (WPTC), 2017, pp. 1-3: IEEE.10.1109/WPT.2017.7953815 ↗
18. V. F.-G. Tseng, S. S. Bedair, and N. Lazarus, “Acoustic wireless power transfer with receiver array for enhanced performance,” in 2017 IEEE Wireless Power Transfer Conference (WPTC), 2017, pp. 1-4: IEEE.10.1109/WPT.2017.7953842 ↗
19. Z. Z. Du G and Gong X, “Fundamentals of Acoustics, 3rd ed.,” Nanjing University Press: Nanjing, China, pp. 351–352, 2012.
20. CRC Handbook of Chemistry and Physics, 104th ed. Boca Raton, FL: CRC Press, 2023.
21. B. Pavlakovic, M. Lowe, D. Alleyne, and P. Cawley, Disperse: a general purpose program for creating dispersion curves, Review of Progress in Quantitative Nondestructive Evaluation, Vol. 16A. (Boston, MA: Springer, US, 1997), pp. 185–192.10.1007/978-1-4615-5947-4_24 ↗
22. Sayyad, M. (2021). Experimental generation and analysis of Lamb waves in aluminium and glass/epoxy composite plates. Journal of The Institution of Engineers (India): Series C, 102(4), 909-920.10.1007/s40032-021-00717-4 ↗
23. V. F.-G. Tseng, D. Diamond, T. Kiebala, B. Novick, J. J. Radice, and S. S. Bedair, “Acoustic-based selective wireless power transfer in metal structures,” Engineering Research Express, vol. 7, no. 2, p. 025357, 2025/05/29 2025.10.1088/2631-8695/add85c ↗
24. Sparkfun. Resonance transducer specs [Online]. Available: https://cdn.sparkfun.com/assets/e/c/8/0/6/DS-18730-Surface_Transducer_-_Large.pdf
25. P. A. Inc. PIEZO BENDER 2000HZ 30VP-P, AB2720B-LW100-R [Online]. Available: https://puiaudio.com/product/benders/AB2720B-LW100-R
26. Siglent. Siglent SDG1032X 30MHz Function/Arbitrary Waveform Generator [Online]. Available: https://www.siglent.eu/product/1136898/siglent-sdg1032x-30mhz-function-arbitrary-waveform-generator
27. Siglent. Siglent SDS1102CML+ 100MHz Dual channel oscilloscope [Online]. Available: https://www.siglent.eu/product/1139189/siglent-sds1102cml-100mhz-dual-channel-oscilloscope
28. T. Becker, M.E. Kiziroglou, M. Duffy, B. Zaghari, and E.M. Yeatman, Industrial adoption of energy harvesting: challenges and opportunities. IEEE Power Electron Mag 10(2), 57–64 (2023).10.1109/MPEL.2023.3271199 ↗
29. T. Becker et al., Energy harvesting for a green internet of things (PSMA White Paper). Power Supply Manufacturers Association, 2021.
30. "Texas Instruments BQ25570 nano power boost charger and buck converter for energy harvester powered applications," 2019, Available: www.ti.com/product/BQ25570.
31. M. E. Kiziroglou, S. W. Wright, E. M. Yeatman, and A. S. Holmes, “Dual storage power management for energy autonomous microsystems,” IEEE transactions on industrial electronics, pp. 1-10, 2025.10.1109/TIE.2024.3522467 ↗
32. M. Blagojevic et al., Autonomous electrical current monitoring system for aircraft. IEEE Trans. Aerosp. Electron. Syst. 59(3), 3345–3358 (2023).10.1109/TAES.2022.3225253 ↗
33. X. Wu et al., A 0.04MM 3 16NW wireless and batteryless sensor system with integrated Cortex-M0+ processor and optical communication for cellular temperature measurement. 2018, pp. 191-192.10.1109/VLSIC.2018.8502391 ↗
34. H. Bhamra et al., A batteryless, crystal-free, multinode synchronized soc “bionode” for wireless prosthesis control. IEEE J. Solid-State Circuits 50(11), 2714–2727 (2015).10.1109/JSSC.2015.2480854 ↗
35. A. Y. Pandiyan, M. E. Kiziroglou, and E. M. Yeatman, “Complex impedance matching for far-field acoustic wireless power transfer,” in 2021 IEEE 20th International conference on micro and nanotechnology for power generation and energy conversion applications (PowerMEMS), 2021, pp. 44-47.10.1109/PowerMEMS54003.2021.9658395 ↗
36. V.F.G. Tseng, S.S. Bedair, J.J. Radice, T.E. Drummond, and N. Lazarus, Ultrasonic Lamb waves for wireless power transfer. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 67(3), 664–670 (2020).10.1109/TUFFC.2019.2949467 ↗
37. J. Dicken, P. D. Mitcheson, I. Stoianov, and E. M. Yeatman, “Increased power output from piezoelectric energy harvesters by pre-biasing,” presented at the POWERMEMS 2009, 2009.
38. D. Guyomar, A. Badel, E. Lefeuvre, and C. Richard, Toward energy harvesting using active materials and conversion improvement by nonlinear processing. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 52(4), 584–595 (2005).10.1109/TUFFC.2005.1428041 ↗
39. A.Y.S. Pandiyan, D.E. Boyle, M.E. Kiziroglou, S.W. Wright, and E.M. Yeatman, Optimal dynamic recharge scheduling for two-stage wireless power transfer. IEEE Trans. Industr. Inf. 17(8), 5719–5729 (2021).10.1109/TII.2020.3035645 ↗
40. V.F.-G. Tseng, S.S. Bedair, and N. Lazarus, Phased array focusing for acoustic wireless power transfer. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 65(1), 39–49 (2017).10.1109/TUFFC.2017.2771283 ↗
41. Y. Xu, Y. Sun, J. Tang, C. Wei, X. Ding, and W. Huang, A Lamb waves-based wireless power transmission system for powering IoT sensor nodes. Smart Mater Struct 31(10), 105009 (2022).10.1088/1361-665X/ac8ada ↗