Modeling the Proton-Irradiation Impact on the Characteristics of Hybrid (MAPbI3) and Inorganic (CsPbI3) Perovskite Solar Cells
Source abstract
Abstract
A comprehensive modeling approach has been developed to analyze the impact of proton irradiation (with different beam energy and irradiation fluence levels) on the device characteristics of two different hybrid (MAPbI3) and inorganic (CsPbI3) perovskite solar cell. Proton irradiation induces lattice defects (vacancies) that modify the key performance parameters, such as carrier mobility, lifetime, and shunt and series resistance, thereby increasing recombination losses and diminishing open-circuit voltage and current density and quantum efficiency. Two perovskite solar cells based on MAPbI3 and CsPbI3 were modeled under proton exposure at 500 keV, 1.5 MeV, and 3 MeV, across fluence ranging from 1011 p/cm2 to 1015 p/cm2. Simulation results show that defect density increases from ~1014 cm−3 to 1017 cm−3 with increased fluence and significantly deteriorates the carrier lifetime. Consequently, MAPbI3 experiences severe performance losses (power conversion efficiency [PCE]: 17–6%), while CsPbI3 maintains higher resilience (PCE: 18–10%) under the same conditions. The normalized damage function, Dd(x), decays more rapidly in MAPbI3—within 50 nm—whereas in CsPbI3 it extends beyond 150 nm, confirming stronger lattice stability and reduced non-ionizing energy loss. This modeling quantitatively demonstrates that the all-inorganic CsPbI3 perovskite retains over 60% of its initial photovoltaic efficiency under high-energy, high-fluence irradiation, thus providing superior structural stability and radiation tolerance compared to hybrid MAPbI3 counterparts for space applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · solar cell performance optimization · Chemical and Physical Properties of Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. P. Zhao, J. Su, Y. Guo, L. Wang, Z. Lin, J. Zhang, Y. Hao, X. Ouyang, and J. Chang, A new all-inorganic vacancy-ordered double perovskite Cs2CrI6 for high-performance photovoltaic cells and alpha-particle detection in space environment. Mater. Today Phys. 20, 100446 (2021).10.1016/j.mtphys.2021.100446 ↗
2. H.S. Rao, W.-H. Chiu, S.-H. Chen, M.-C. Wu, and K.-M. Lee, Impact of proton radiation on the performance of single-junction perovskite solar cells for space applications. Sol. Energy Mater. Sol. Cells 295, 114015 (2026).10.1016/j.solmat.2025.114015 ↗
3. T.L. Brockmann, S. Blankemeyer, S. Kirner, R. Peibst, T. Wietler, and H. Schulte-Huxel, Cell-to-module factors of perovskite/silicon tandem and silicon single junction mini modules for different module rear sides. Sol. Energy Mater. Sol. Cells 296, 114027 (2026).10.1016/j.solmat.2025.114027 ↗
4. A.R. Kirmani, T.A. Byers, Z. Ni, K. VanSant, D.K. Saini, R. Scheidt, X. Zheng, T.B. Kum, I.R. Sellers, and L. McMillon-Brown, Unraveling radiation damage and healing mechanisms in halide perovskites using energy-tuned dual irradiation dosing. Nat. Commun. 15, 696 (2024).10.1038/s41467-024-44876-1 ↗
5. V.V. Brus, F. Lang, J. Bundesmann, S. Seidel, A. Denker, B. Rech, G. Landi, H.C. Neitzert, J. Rappich, and N.H. Nickel, Defect dynamics in proton irradiated CH3NH3PbI3 perovskite solar cells. Adv. Electron. Mater. 3, 1600438 (2017).10.1002/aelm.201600438 ↗
6. F. Lang, N.H. Nickel, J. Bundesmann, S. Seidel, A. Denker, S. Albrecht, V.V. Brus, J. Rappich, B. Rech, and G. Landi, Radiation hardness and self-healing of perovskite solar cells. Adv. Mater. 28, 8726 (2016).10.1002/adma.201603326 ↗
7. F. Lang, M. Jošt, K. Frohna, E. Köhnen, A. Al-Ashouri, A.R. Bowman, T. Bertram, A.B. Morales-Vilches, D. Koushik, and E.M. Tennyson, Proton radiation hardness of perovskite tandem photovoltaics. Joule 4, 1054 (2020).10.1016/j.joule.2020.03.006 ↗
8. H.P. Parkhomenko, A.I. Mostovyi, M. Kaikanov, J. Strey, M.C. Turcu, M. Diederich, S.J. Wolter, V. Steckenreiter, J. Vollbrecht, and V.V. Brus, Characterization of fully-evaporated perovskite solar cells and photodetectors under high-intensity pulsed proton irradiation. Sci. Rep. 14, 16735 (2024).10.1038/s41598-024-67541-5 ↗
9. L. Basiricò, I. Fratelli, M. Verdi, A. Ciavatti, L. Barba, O. Cesarini, G. Bais, M. Polentarutti, M. Chiari, and B. Fraboni, Mixed 3D–2D perovskite flexible films for the direct detection of 5 MeV protons. Adv. Sci. 10, 2204815 (2023).10.1002/advs.202204815 ↗
10. D. Hughes, S.M.P. Meroni, J. Barbé, D. Raptis, H.K.H. Lee, K.C. Heasman, F. Lang, T.M. Watson, and W.C. Tsoi, Proton radiation hardness of perovskite solar cells utilizing a mesoporous carbon electrode. Energy Technol. 9, 2100928 (2021).10.1002/ente.202100928 ↗
11. B. Xue, L. Zhang, T. Zhang, N. Liu, A. Ejaz, and Y. Liang, Degradation behavior and damage mechanisms of perovskite solar cells under 50–200 keV proton irradiations. Sol. Energy Mater. Sol. Cells 282, 113442 (2025).10.1016/j.solmat.2025.113442 ↗
12. C. Costa, M. Manceau, S. Duzellier, T. Nuns, and R. Cariou, Perovskite solar cells under protons irradiation: from in-situ IV-monitoring to root cause degradation elucidation. Sol. Energy Mater. Sol. Cells 257, 112388 (2023).10.1016/j.solmat.2023.112388 ↗
13. S. Dabbabi, T. Ben Nasr, and N. Turki Kamoun, CIGS solar cells for space applications: numerical simulation of the effect of traps created by high-energy electron and proton irradiation on the performance of solar cells. JOM 71(2), 602 (2019).10.1007/s11837-018-2748-9 ↗
14. Y. Yan, M. Fang, X. Tang, F. Chen, H. Huang, and X. Sun, Effect of 150 keV proton irradiation on the performance of GaAs solar cells. Nucl. Instrum. Methods Phys. Res. B 451, 49 (2019).10.1016/j.nimb.2019.04.065 ↗
15. A. Gauffier, J.-P. David, and O. Gilard, Analytical model for multi-junction solar cells prediction in space environment. Microelectron. Reliab. 48, 1494 (2008).10.1016/j.microrel.2008.07.049 ↗
16. M.K.A. Mohammed, B.T. Al-Azraq, A.K. Al-Mousoi, E.Y. Salih, A. Rajiv, B.N. Sahu, M.F. Rahman, and E. Akman, Multiphysics insights into CsPbI3 perovskite photovoltaics under proton irradiation. Renew. Energy 256, 124571 (2026).10.1016/j.renene.2025.124571 ↗
17. M. Lu, R. Wang, Y. Liu, Z. Feng, Z. Han, and C. Hou, Displacement damage dose approach to predict performance degradation of on-orbit GaInP/GaAs/Ge solar cells. Nucl. Instrum. Methods Phys. Res. B 307, 362 (2013).10.1016/j.nimb.2012.11.060 ↗
18. S. Makhamn, G.C. Sun, and J.C. Bourgoin, Modelling of solar cell degradation in space. Sol. Energy Mater. Sol. Cells 94, 971 (2010).10.1016/j.solmat.2010.01.026 ↗
19. S. Sato, H. Miyamoto, M. Imaizumi, K. Shimazaki, C. Morioka, K. Kawano, and T. Ohshima, Degradation modeling of InGaP/GaAs/Ge triple-junction solar cells irradiated with various-energy protons. Sol. Energy Mater. Sol. Cells 93, 768 (2009).10.1016/j.solmat.2008.09.044 ↗
20. N. Rahman, I. Mamoon, M.A. Sattar, M.F. Rahman, M.M. Islam, and M.D. Haque, Simulation and analysis of different TMDC solar cells under proton radiation using Monte Carlo methods, SCAPS, and machine learning techniques. J. Phys. Chem. Solids 199, 112479 (2025).10.1016/j.jpcs.2024.112479 ↗
21. V. Fernandes, J. Gomes, J. Gaspar, P.T. Patrício, B.P. Falcão, A.F. da Cunha, N. Catarino, J.G. Marques, M. Peres, K. Lorenz, J.P. Teixeira, P.M.P. Salomé, and J.P. Leitão, Evaluating 1 MeV proton damage in Cu(In,Ga)Se2 solar cells and a recovery pathway. J. Phys. Energy 7, 035021 (2025).10.1088/2515-7655/ade5c9 ↗