Phase Equilibria of the Sn–Ni–V System: The 980°C Isothermal Section and the Sn-Rich Corner at 600°C and 300°C
Source abstract
Abstract
Ternary Sn–Ni–V alloys were prepared and annealed at 980°C, 600°C, and 300°C for 15, 60 and 60 days, respectively. The annealed alloys were metallographically examined and the equilibrium phases formed were identified on the basis of determination of composition and x-ray diffraction analysis. The isothermal region of the ternary Sn–Ni–V system at 980°C was studied. Nine three-phase regions and more than 20 conjugate lines were detected at 980°C. The range of composition of VNi2Sn at 980°C spans 24.5–59.2 at.% V, 52.1–25.5 at.% Ni, and 15.3–23.4 at.% Sn. Its lattice constant increases with increasing V content. A sharp increase near 40.4 at.% V is indicative of a second-order transition. It is believed that atomic site occupation changed when the V content was >40.4 at.%. The maximum solubility of V in Ni3Sn2 can reach 23.3 at.%; that in Ni3Sn is below 0.6 at.%. Up to 3.4 at.% Ni dissolves in V3Sn. The Sn-rich corner of the Sn–Ni–V system at 600°C and 300°C was also investigated experimentally. The solubility of Ni in VSn2 and V in Ni3Sn4 at 600°C and 300°C are both less than 0.5 at.%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. C.Y. Liu, K.N. Tu, T.T. Sheng, C.H. Tung, D.R. Frear, and P. Elenius, J. Appl. Phys. 87, 750 (2000).10.1063/1.371967 ↗
2. C.-C. Chen and S.-W. Chen, J. Electron. Mater. 35, 1701 (2006).10.1007/s11664-006-0221-y ↗
3. C.-C. Chen, S.-W. Chen, and C.-Y. Kao, J. Electron. Mater. 35, 922 (2006).10.1007/BF02692548 ↗
4. S.-W. Chen, C.-C. Chen, and C.-H. Chang, Scr. Mater. 56, 453 (2007).10.1016/j.scriptamat.2006.12.002 ↗
5. C. Wu, X. Su, L. Lu, H. Peng, H. Tu, and Y. Zhang, J. Electron. Mater. 43, 4111 (2014).10.1007/s11664-014-3307-y ↗
6. C.-C. Chen, Y.-T. Chan, and Y.-K. Liang, J. Taiwan Inst. Chem. Eng. 45, 2711 (2014).10.1016/j.jtice.2014.04.014 ↗
7. P. Kripyakevich, V.Y. Markiv, Dopov. Akad. Nauk Ukr. 1606 (1963).
8. C.C.M. Campbell and C.V. Stager, Can. J. Phys. 54, 2197 (1976).10.1139/p76-261 ↗
9. Y. Fujita, K. Endo, M. Terada, and R. Kimura, J. Phys. Chem. Solids 33, 1443 (1972).10.1016/S0022-3697(72)80437-2 ↗
10. C. Schmetterer, H. Flandorfer, K.W. Richter, U. Saeed, M. Kauffman, P. Roussel, and H. Ipser, Intermetallics 15, 869 (2007).10.1016/j.intermet.2006.10.045 ↗
11. P. Nash and A. Nash, Bull. Alloy Phase Diagr. 6, 350 (1985).10.1007/BF02880521 ↗
12. A. Leineweber, Int. J. Mater. Res. 102, 861 (2011).10.3139/146.110540 ↗
13. I. Jandl, F. Boero, H. Ipser, and K.W. Richter, Intermetallics 46, 199 (2014).10.1016/j.intermet.2013.11.018 ↗
14. A. Zemanova, A. Kroupa, and A. Dinsdale, Monatsh. Chem. 143, 1255 (2012).10.1007/s00706-012-0778-5 ↗
15. J.M. Liu, C.P. Guo, C.R. Li, and Z.M. Du, Int. J. Mater. Res. 104, 51 (2013).10.3139/146.110827 ↗
16. C.-H. Lin, S.-W. Chen, and C.-H. Wang, J. Electron. Mater. 31, 907 (2002).10.1007/s11664-002-0182-8 ↗
17. A. Kroupa, R. Mishra, D. Rajamohan, H. Flandorfer, A. Watson, and H. Ipser, Calphad 45, 151 (2014).10.1016/j.calphad.2013.11.007 ↗
18. Y.-T. Chen, G. Fang, and C.-C. Chen, J. Electron. Mater. 43, 3324 (2014).10.1007/s11664-014-3223-1 ↗
19. H.-F. Hsu and S.-W. Chen, Acta Mater. 52, 2541 (2004).10.1016/j.actamat.2004.02.002 ↗
20. S.-K. Seo, M.G. Cho, and H.M. Lee, J. Electron. Mater. 36, 1536 (2007).10.1007/s11664-007-0256-8 ↗
21. G.P. Vassilev, K.I. Lilova, and J.C. Gachon, J. Alloys Compd. 469, 264 (2009).10.1016/j.jallcom.2008.01.100 ↗
22. J. Chang, S. Seo, and H. Lee, J. Electron. Mater. 39, 2643 (2010).10.1007/s11664-010-1313-2 ↗
23. H.Q. Dong, V. Vuorinen, T. Laurila, and M. Paulasto-Kröckel, Calphad 43, 61 (2013).10.1016/j.calphad.2013.10.001 ↗
24. X.J. Liu, M. Kinaka, Y. Takaku, I. Ohnuma, R. Kainuma, and K. Ishida, J. Electron. Mater. 34, 670 (2005).10.1007/s11664-005-0082-9 ↗
25. L. Marchukova, N. Matveeva, I. Kornilov, Russ. Metall. 157 (1973).
26. S. Geller, B. Matthias, and R. Goldstein, J. Am. Chem. Soc. 77, 1502 (1955).10.1021/ja01611a029 ↗
27. T. Wolpl and W. Jeitschko, J. Alloys Compd. 210, 185 (1994).10.1016/0925-8388(94)90136-8 ↗
28. Q. Yue, Y.Q. Liu, M.Y. Chu, and J.Y. Shen, Calphad 33, 539 (2009).10.1016/j.calphad.2009.03.003 ↗
29. T. Studnitzky, B. Onderka, and R. Schmid-Fetzer, Z. Metallkd. 93, 48 (2002).10.3139/146.020048 ↗
30. S. Komjathy, J. Less Common Met. 3, 468 (1961).10.1016/0022-5088(61)90032-7 ↗
31. M. Bulanova, I. Fartushna, K. Meleshevich, and Y. Podrezov, J. Phase Equilib. Diffus. 33, 276 (2012).10.1007/s11669-012-0044-x ↗
32. C. Wu, X. Su, Y. Liu, H. Peng, J. Wang, and H. Tu, J. Alloys Compd. 567, 115 (2013).10.1016/j.jallcom.2013.02.159 ↗
33. J.F. Smith, O.N. Carlson, and P.G. Nash, Bull. Alloy Phase Diagr. 3, 342 (1982).10.1007/BF02869306 ↗
34. A. Watson and L. Cornish, Ternary Alloy Systems, ed. G. Effenberg and S. Ilyenko (New York, Springer Berlin Heidelberg, 2009), pp. 293–310.
35. Y.F. Lomnytska and O.P. Pavliv, Inorg. Mater. 43, 608 (2007).10.1134/S0020168507060106 ↗