Development and characterization of a novel high explosive and TNT mixed powder
Source abstract
Abstract
Trinitrotoluene (TNT) is often mixed with powdered High Explosives (HEs) to desensitize and solidify them. Traditional methods such as melt casting can result in inconsistent densities based on cooling rate and HE particle size. A new method for making consistent and press-able TNT/HE charges is presented. Powdered HE dispersed in boiling water allowed the TNT to slowly melt in solution for uniform coating. Sensitivity testing showed that the new powder was less sensitive to friction than both powdered HE and crushed TNT. Thermographic inspection demonstrated that the quality, density, and consistency of traditional melt cast charges could not be controlled. The melt cast charge was shown to have a large TNT rich section at its center and a long RDX rich section at its base while the density range for the coated powder pellet was relatively small. The new coated powder charge was found to have the highest relative effectiveness of all charges with a higher detonation pressure and faster reaction rate.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Energetic Materials and Combustion · Rocket and propulsion systems research · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Missouri University of Science and Technology
Funding
Kummer Innovation and Entrepreneurship Doctoral Fellowship at Missouri S&T
References (40)
Show source-provided references
1. Accurate energetic systems LLC | bulk explosives. AES expanded. https://www.aesys.biz/tnt (accessed February 6 2024).
2. 10.1002/jctb.502021060410.1002/jctb.5020210604 ↗
3. 10.1061/(ASCE)0733-9399(1997)123:2(162)10.1061/(ASCE)0733-9399(1997)123:2(162) ↗
4. Bemm E. S. Karlsson and M. Bergh. 2011. Comparison between Swedish casting specifications and MIL-STD. FOI - Swedish defence research agency base data report FOI-R-3234–se.
5. Classification procedures, test methods and criteria relating to explosives of class 1. 2009. In Recommendations on transportation of dangerous goods; manual of tests and criteria, 4th ed. 7–213. (NY) United Nations. https://unece.org/DAM/trans/danger/publi/manual/Rev5/English/01en_part1.pdf.
6. Creaform. HandySCAN 3D|Professional portable metrology-grade [3D laser scanner]. https://www.creaform3d.com/en/portable-3d-scanner-handyscan-3d (accessed October 2 2023).
7. Elbeih, A., and S. Zeman. 2014. Characteristics of melt cast compositions based on cis-1,3,4,6-tetranitrooctahydroimidazo-[4,5 d] imidazole (BCHMX)/TNT. Central European Journal of Energetic Materials 11:501–13.
8. Fordham, S. 2013. High explosives and propellants. Elsevier Science & Technology Books.
9. Freeman, T. 2009. Quantifying experience in powder processing. Pharmaceutical Technology Europe 21 (3) https://www.pharmtech.com/view/quantifying-experience-powder-processing.
10. Fung M. V. and M. C. Patel. 2010. Development and manufacture of an insensitive composition b replacement explosive IMX-104 for mortar applications.
11. Gibbs T. R. A. Popolato and J. F. Baytos. 1980. LASL explosive property data. Berkeley: University of California Press. http://archive.org/details/LASL_Explosive_Property_Data (accessed January 21 2024).10.1525/9780520313743 ↗
12. 10.1088/1742-6596/500/19/19200410.1088/1742-6596/500/19/192004 ↗
13. Harris J. 1982. “Friction sensitivity of primary explosives ” US army armament research and development command large caliber weapon systems laboratory. Technical report ARLCD-TR-82012. Dover NJ.
14. Hobbs, M. L., M. J. Kaneshige, and M. U. Anderson. 2012. Cookoff of a melt-castable explosive. Presented at the JANNAF 27th Propulsion Systems Hazards Joint Subcommitee Meeting, Monterrey, CA, December.
15. 10.1007/s10973-019-08924-z10.1007/s10973-019-08924-z ↗
16. 10.1063/5.020688510.1063/5.0206885 ↗
17. 10.1063/1.171487710.1063/1.1714877 ↗
18. 10.1016/j.rser.2017.07.01610.1016/j.rser.2017.07.016 ↗
19. 10.1063/5.008236710.1063/5.0082367 ↗
20. 10.1021/acsmaterialsau.1c0001310.1021/acsmaterialsau.1c00013 ↗
21. 10.1038/095366a010.1038/095366a0 ↗
22. Mayseless, M., E.Hirsch, W. B. Harvey, and J. E. Backofen. 2011. Is higher detonation velocity needed for shaped-charges. In 26th International Symposium on Ballistics, Miami, FL, 155–166.
23. 10.1007/s00894-020-04498-y10.1007/s00894-020-04498-y ↗
24. Monson, W. L., and L. J. Reid. 1955. The steel plate dent test. Maryland: AD665335, Maryland University College Park.
25. 10.1134/S199079311101011810.1134/S1990793111010118 ↗
26. 10.1007/s00193-021-01041-710.1007/s00193-021-01041-7 ↗
27. 10.1002/prep.20110004710.1002/prep.201100047 ↗
28. 10.1021/ed022p52210.1021/ed022p522 ↗
29. 10.1038/s41598-019-48807-910.1038/s41598-019-48807-9 ↗
30. 10.1016/0304-3894(86)80010-310.1016/0304-3894(86)80010-3 ↗
31. 10.2172/27379710.2172/273797 ↗
32. Smith L. C. 1963. On brisance and a plate-denting test for the estimation of detonation pressure. LADC-6267 Los Alamos National Lab. (LANL) Los Alamos NM United States. doi: 10.2172/4668740.10.2172/4668740 ↗
33. 10.14429/dsj.59.148210.14429/dsj.59.1482 ↗
34. 10.1002/app.1993.07050011510.1002/app.1993.070500115 ↗
35. Swinton, R. J., and L. McVay. 1997. Critical diameter study of unconfined Australian manufactured composition B, grades A and B. Melbourne, Victoria: DSTO Aeronautical and Maritime Research Laboratory.
36. Symposia on detonation (1st and 2nd) held at Washington DC on 11-12 January 1951 and 9-11 Februaryruary 1955. 1955. Washington D.C: Office of Naval Research. https://apps.dtic.mil/sti/citations/ADA289981. (accessed Febuary. 6 2024).
37. 10.1063/1.172443810.1063/1.1724438 ↗
38. 10.1002/prep.20140019610.1002/prep.201400196 ↗
39. Whitworth, N., and C. Handley. 2020. A CREST model for the RDX/TNT explosive composition B. Presented at the Shock compression of condensed matter - 2019: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, 030034, Portland, OR, USA. doi: 10.1063/12.0000943.10.1063/12.0000943 ↗
40. Wilson W. S. 1981. The use of recrystallised RDX in cast RDX/TNT compositions. Materials research labs ascot vale. Department of defence materials research laboratories report mrl-r-805.