Optimizing HMX/RDX based: balancing cost reduction and performance stability through partial RDX substitution
Source abstract
Abstract
Polymer-bonded explosives (PBX) based on HMX offer exceptional detonation performance but are limited by high costs. This study investigates the feasibility of reducing costs by partially substituting HMX with RDX while maintaining energy output. Four HMX-based PBXs with RDX doping ratios of 0%, 8.3%, 16.6%, and 24.9% were prepared and characterized. Results indicate that RDX incorporation has minimal impact on the formulation’s microstructure. However, at 24.9% RDX content, Differential Scanning Calorimetry (DSC) revealed a 6°C decrease in decomposition peak temperature and a 15 kJ/mol drop in activation energy. Cylinder tests showed only a marginal reduction in Gurney energy (2.99 mm·μs⁻¹ vs. 2.97 mm·μs⁻¹). Validated by explosive driving tests and multi-physics simulations across various media, the velocity differences remain negligible. These findings confirm that partially replacing HMX with RDX is a viable, cost-effective strategy for PBX formulations without significantly compromising performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Embedded Systems Design Techniques · Parallel Computing and Optimization Techniques · Advanced Data Compression Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Beijing Institute of Technology
North Institute for Scientific & Technical Information
Gansu Yinguang Chemical Industry Group Co., Ltd
References (45)
Show source-provided references
1. Aby M. 2023. The Johnson Cook model for the machinability study[J]. Materials Today: Proceedings. 80:357–362. https://doi.org/10.1016/j.matpr.2023.02.371
2. 10.1002/prep.20080004810.1002/prep.200800048 ↗
3. 10.1016/j.ijimpeng.2022.10419010.1016/j.ijimpeng.2022.104190 ↗
4. Cao Y, Tong Y, Huang F. 2013. Effect of graphite content and granularity on the detonation velocity of RDX/graphite mixed explosive. Chin J Explos Propellants. 36(6):39–42.
5. 10.14077/j.issn.1007-7812.2002.03.01010.14077/j.issn.1007-7812.2002.03.010 ↗
6. Cui H, Wu JA, Zhou H. 2023. Probe cylinder test method and calibration of JWL state equation parameters for TNT explosive detonation products. Chin J Energetic Mater. 31(7):707–713.
7. 10.1016/j.cplett.2021.13888110.1016/j.cplett.2021.138881 ↗
8. Duan YL, Han Y, Lu XJ. 2018. Driving ability of HMXbased optimized exploratory effect by the reaction degree of aluminum powder. AIP Conference Proceedings, 1979(1): 150013.
9. Feng XJ, Wang XF, Xu HT. 2014. Influence of Al powder on the explosion acceleration ability for explosives. Chin J Explos Propellants. 37(5):25–27, 32.
10. Gong Z, Lin N, Wei C. 2023. Effect of accelerated aging by dampness and heat on mechanical properties of pentaerythritol acrolein resin⁃RDX castable explosive. Chin J Energetic Mater. 31(7):672–678.
11. Hallquist JO. 2006. Ls-dyna theory manual[M]. Livermore Software Technology Corporation.
12. Han Y, Huang H, Huang Y. 2009. Cylinder test of aluminized explosives and its numerical simulation. Chin J Explos Propellants. 32(4):14–17.
13. 10.1115/1.400432610.1115/1.4004326 ↗
14. Hu HW, Yan JJ, Chen L. 2017. Effect of aluminum powder content and its particle size on reaction characteristics for underwater explosion of CL-20 based explosives containing aluminum. Explosion Shock Waves. 37(1):157–161.
15. 10.1016/S0924-7963(01)00010-010.1016/S0924-7963(01)00010-0 ↗
16. Kennedy D, Jones D. 1993. Modelling shock initiation and detonation in the non-ideal explosive PBXW-115. Journal of Explosive Research. 11. https://www.researchgate.net/publication/235216364_Modelling_Shock_Initiation_and_Detonation_in_the_Non-Ideal_Explosive_PBXW-115
17. Keshavarz MH, Mofrad RT, Poor KE. 2006. Determination of performance of nonideal aluminized explosives. J Hazard Mater. 137(1):83–87.10.1016/j.jhazmat.2006.02.048 ↗
18. Lee KE, Braithwaite PC, Sanderson AJ. 2000. An insensitive alternative to the pressed explosive LX-14. J Explos. 12(3):45–58. https://www.semanticscholar.org/paper/AN-INSENSITIVE-ALTERNATIVE-TO-THE-PRESSED-EXPLOSIVE-Lee-Braithwaite/ebe667ba666c2101c62ee98a572383054bc1747d#cited-papers?utm_source=direct_link
19. Lemar ER, Forbes JW, Sutherland GT. 1996. Decomposition wave velocity and curvature of IRX4 and PBXN110[c]. Conference of American Physical Society Topical Group on Shock Compression of Condensed Matter; Maryland, AIP, 370(1): 791–794.
20. Li K, Gao LL, Chen CY. 2016. Effect of aluminum content and particle size on acceleration ability for explosives. Sci Technol Eng. 16(31):179–182.
21. Li SW, Wang ZH, Wu CC. 2022. Effect of aluminum content on detonation heat of RDX-based aluminized explosives. Explosive Mater. 51(4):29–32.
22. Liang ZF. 2020. Preface to the special issue on the detonation characteristics of explosives and explosives. Chin J Explos Propellants. 43(3):229–230.
23. 10.1002/prep.20170026610.1002/prep.201700266 ↗
24. 10.1016/j.dt.2020.12.00110.1016/j.dt.2020.12.001 ↗
25. Liu J, Zeng J, Li Q. 2012. Mechanical pulverization for nano HMX and study on its mechanical sensitivities. Chin J Explos Propellants. 35(6):12–14.
26. Lu M, Chen Y, Luo Y-J, Tan H. 2005. Preparation of waterborne polyurethane latex and study on its cladding of RDX. Jour Prop Tech. 26(1):89–92. https://www.scopus.com/inward/record.uri?eid=2-s2.0-15944402486&partnerID=40&md5=a7d14d5558baa0cc79b6a6f7c5c3e13a
27. Makhov MN, Gogulya MF, Dolgoborodov AY. 2004. Acceleration ability and heat of explosive decomposition of aluminized explosives. Combust Explosion Shock Waves. 40(4):458–466.10.1023/B:CESW.0000033569.77449.d9 ↗
28. Miao S, Zhang L, Wang T. 2018. Molecular dynamics study on effects of RDX dopants on properties of HMX. Chin J Energetic Mater. 26(10):828–834.
29. Miller PJ. 1995. A reactive flow Model with coupled reaction kinetics for detonation and combustion in non-ideal explosives. MRS Online Proceedings Library. 418:413–420. https://doi.org/10.1557/PROC-418-413
30. Montesi LJ, Alexander KE. 1996. Development of the high performance, metal accelerating explosive, PBXW11. Technol Manuf Process. 6(3):1–7.
31. Nie PS, Jin SH, Du LXS. 2022. Shock initiation performance of NTO-based polymer bonded explosive. Def Technol. 18(9):1538–1545.10.1016/j.dt.2021.08.011 ↗
32. Olovsson L, Souli M, Do I. 2003. Lsdyna—ALE capabilities (arbitrary Lagrangian–Eulerian) fluid–structure interaction modeling[R]. LSTC.
33. 10.1016/j.combustflame.2020.01.04010.1016/j.combustflame.2020.01.040 ↗
34. Pei HB, Zhong B, Li XH. 2019. Study on the cylinder tests and equation of state in RDX based aluminized explosives. Chin J Explos Propellants. 42(4):403–409.
35. 10.1063/1.489765810.1063/1.4897658 ↗
36. Qin JF, Zhao X, Qian H. 2020. Effect of crystal structure of high density spherical RDX on safety performance of PBX. Acta Armamentarii. 41(3):481–487.
37. Stiel L, Baker E. 2006. Study of dentition and cylinder velocity for optimized explosives[C]. Shock Compression of Condensed Matter-2005: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter; Baltimore: AIP, 845(1):475–478.
38. Trzciński W, Trebinski R. 1997. Modelling of the process of driving a cylindrical tube by the detonation products described by the JWL equation of state. Jour Dyna Explo. 783–797. https://www.researchgate.net/publication/328450849_Modelling_of_the_process_of_driving_a_cylindrical_tube_by_the_detonation_products_described_by_the_JWL_equation_of_state
39. Wang CL, Yao LN, Zhao S. 2016. The effect of thermal shock on the size and density of pressure packed plastic explosives (PBX) based on RDX. Sci Technol Eng. 16(1):228–231.
40. Wang JL, Yang XM, Guo W. 2015. Study on detonation heart and reaction rate of aluminum. Sci Technol Eng. 15(36):166–168.
41. Weng JD, Tan H, Wang X. 2007. Optical fiber interferometer for velocity measurements with picosecond resolution. Appl Phys Lett. 89(11):1–3.
42. Wu Y, Pan S, Jiang P. 2024. Experimental study on thermal damage characterization of RDX-based PBX after high-temperature treatment. J Saf Environ. 2024(3):891–897.
43. 10.14077/j.issn.1007-7812.2007.04.00410.14077/j.issn.1007-7812.2007.04.004 ↗
44. Xu C, Zhang D, Zhang P. 2023. Accelerated aging regulation and life evaluation of RDX based cast PBX. Equip Environ Eng. 20(10):101–107.
45. Xu YB, Tan YX, Cao WG. 2020. Thermo⁃decomposition performance of RDX and the effect of HMX on its Thermo⁃stability. Chin J Energetic Mater. 28(2):157–163.