Manufacturing superfine AP by milling in a lab-scale resonant acoustic mixer (LabRAM)
Source abstract
Abstract
A common practice to deisgn composite propellants with high burning rates is to use several sizes of the oxidizer (e.g., ammonium perchlorate, AP) to increase the total amount of solids that can be packed into the composite propellant system. Small AP particles (≤15 μm) are difficult to obtain from commercial vendors due to restrictions derived from increased explosion hazards for superfine AP (SFAP). An in-house SFAP manufacturing process was devised herein using resonant acoustic mixing (RAM). A 90-μm AP feedstock was utilized to produce SFAP batches with average particle sizes of approximately 2 μm. Scanning electron microscopy (SEM) was used to characterize particle size distributions. Ballistic testing was conducted with an 80% SFAP composite propellant formulation was burned over a pressure range of 500 to 3,000 psi (3.45 to 20.68 MPa) and a burning rate of 1 in/s (25 mm/s) at 1,000 psi (6.89 MPa) was achieved without optimizing the propellant with additives.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Energetic Materials and Combustion · Combustion and Detonation Processes · Rocket and propulsion systems research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Texas A&M University
References (55)
Show source-provided references
1. Abramoff, M. D., P. J. Magalhaes, and S. J. Ram. 2004. Image processing with ImageJ. Biophotonics International 11:36–42.
2. 10.1016/j.ijpharm.2016.09.04610.1016/j.ijpharm.2016.09.046 ↗
3. Benjamin, M., L. Groven, and S. Son. 2013. Impact ignition and combustion behavior of amorphous metal-based reactive composites. Topical Conference on the Shock Compression of Matter, Seattle Washington. Abstract# O7.003.
4. Carro R. V. 2007. High pressure testing of composite solid rocket propellant: Burner facility characterization. M.S. Thesis. University of Central Florida.
5. 10.2514/6.2005-361710.2514/6.2005-3617 ↗
6. 10.2514/1.B3639210.2514/1.B36392 ↗
7. 10.1002/prep.20160002210.1002/prep.201600022 ↗
8. 10.2514/1.B3680210.2514/1.B36802 ↗
9. 10.2514/6.2019-123810.2514/6.2019-1238 ↗
10. Dillier, C. A. M., E. D. Petersen, T. Sammet, F. A. Rodriguez, J. C. Thomas, and E. L. Petersen. 2019. Very-high-pressure burning rates of AP/HTPB-composite propellants with varying AP particle sizes and distributions. AIAA Propulsion and Energy Forum, Indianapolis, IN, AIAA 2019–4368.
11. Dillier, C. A. M., T. Sammet, F. A. Rodriguez, E. D. Petersen, J. C. Thomas, and E. L. Petersen. 2019. Aluminized and non-aluminized AP/HTPB-composite propellant burning rates at very-high pressures. 27th ICDERS.
12. 10.1016/S1540-7489(02)80359-510.1016/S1540-7489(02)80359-5 ↗
13. 10.1039/C5RA10659A10.1039/C5RA10659A ↗
14. Foster, R. L., J. A. Condon, and R. R. Miller. 1982. Low exponent technology, Hercules report. AFRPL-TR-81-95, air force rocket propulsion laboratory. CA: Edwards AFB.
15. 10.1039/C6RA21300F10.1039/C6RA21300F ↗
16. 10.1080/0010220920894721910.1080/00102209208947219 ↗
17. 10.1021/op400339910.1021/op4003399 ↗
18. Kogha, M. 2006. Safe preparation of fine ammonium perchlorate particles. Energetic Materials- Chengdu 14 (6):471.
19. 10.1002/prep.20090008810.1002/prep.200900088 ↗
20. 10.1252/kakoronbunshu.23.16310.1252/kakoronbunshu.23.163 ↗
21. 10.4164/sptj.34.43710.4164/sptj.34.437 ↗
22. 10.1080/00102202.2019.162073610.1080/00102202.2019.1620736 ↗
23. 10.1002/prep.20180032710.1002/prep.201800327 ↗
24. 10.1080/00102202.2012.66302610.1080/00102202.2012.663026 ↗
25. 10.3109/03639045.2015.110709410.3109/03639045.2015.1107094 ↗
26. 10.1080/07370652.2012.69457610.1080/07370652.2012.694576 ↗
27. 10.6111/JKCGCT.2014.24.2.07010.6111/JKCGCT.2014.24.2.070 ↗
28. 10.1016/j.ijpharm.2014.05.00310.1016/j.ijpharm.2014.05.003 ↗
29. 10.1016/j.cej.2020.12651610.1016/j.cej.2020.126516 ↗
30. 10.1016/j.proci.2018.05.05210.1016/j.proci.2018.05.052 ↗
31. 10.1208/s12249-015-0364-310.1208/s12249-015-0364-3 ↗
32. Moore J. E. 2010. The experimental characterization of particle dynamics in solid composite propellants. ProQuest Dissertations Publishing. Purdue University. 1489572.
33. 10.2514/6.2011-586510.2514/6.2011-5865 ↗
34. 10.1039/C3TA14027J10.1039/C3TA14027J ↗
35. 10.1021/jp200993s10.1021/jp200993s ↗
36. 10.1021/nl062537210.1021/nl0625372 ↗
37. 10.1016/j.jpowsour.2011.11.04510.1016/j.jpowsour.2011.11.045 ↗
38. 10.1002/prep.20090008810.1002/prep.200900088 ↗
39. 10.1016/j.ijpharm.2011.12.00110.1016/j.ijpharm.2011.12.001 ↗
40. 10.1016/j.combustflame.2013.08.00910.1016/j.combustflame.2013.08.009 ↗
41. 10.1016/j.combustflame.2014.08.01310.1016/j.combustflame.2014.08.013 ↗
42. 10.7673/j.issn.1006-2793.2014.04.01710.7673/j.issn.1006-2793.2014.04.017 ↗
43. 10.1002/prep.20080010410.1002/prep.200800104 ↗
44. 10.2514/1.4083110.2514/1.40831 ↗
45. 10.2514/6.2007-576510.2514/6.2007-5765 ↗
46. 10.2514/1.4514810.2514/1.45148 ↗
47. 10.7673/j.issn.1006-2793.2014.04.01710.7673/j.issn.1006-2793.2014.04.017 ↗
48. Terry, B., S. Son, and L. J. Groven. 2013. Combustion performance of mechanically activated silicon/polytetrafluoroethylene. 8th U.S. national combustion meeting. Salt Lake City, UT: Texas A and M University.
49. 10.2514/1.B3748510.2514/1.B37485 ↗
50. Thomas, J. C., and E. L. Petersen. 2022. An updated BDP model for composite AP/HTPB propellant combustion. AIAA 2022-1743 AIAA SCITECH 2022 Forum, San Diego, CA.
51. 10.2514/1.B3718910.2514/1.B37189 ↗
52. 10.1002/prep.20210003310.1002/prep.202100033 ↗
53. 10.3390/nano911160510.3390/nano9111605 ↗
54. 10.1208/s12249-015-0299-810.1208/s12249-015-0299-8 ↗
55. 10.1002/prep.20190016910.1002/prep.201900169 ↗