journal article·2024-12-16

Preparation, optimization and properties of FOX-7@Al microparticles via spray drying

Yue Yang, Rui Yang, Xiaodong Li, Ziwen Dong, Song Kong, Jingyu Wang

Journal of Energetic Materials· Volume 42· Issue 5
Publisher page

Abstract

In this laboratory, FOX-7@Al composites were developed by spray-drying technique. The effects of inlet temperature, feed rate and nitrogen flow rate and their interactions on the morphology and yield of FOX-7@Al were investigated by response surface methodology (RSM). Corresponding empirical equations were derived to show these interactions. The optimum process conditions determined by RSM were as follows: inlet temperature of 90°C, nitrogen flow rate of 450 L·h−1 and feed rate of 4.25 mL·min−1. The crystal structure, surface element distribution and thermal decomposition performance of FOX-7@Al in optimal condition were researched. Small crystallinity and low crystallinity of FOX-7 were observed in the XRD pattern, which were caused by the recrystallization of FOX-7 during the spray drying process. FOX-7@Al exhibited a concentrated energy release efficiency and a uniformed component distribution. The surface of aluminum nanoparticle was covered by FOX-7 and Viton, which effectively suppressed the agglomeration of aluminum nanoparticles and enhanced the heat and mass transfer properties. The work present here not only gives information for predicting, optimizing and improving the preparation conditions of energetic composites, but also provides a spray drying method for dealing with the materials distribution and thermal decomposition performance of composite aluminized explosives.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Energetic Materials and Combustion · Thermal and Kinetic Analysis · Rocket and propulsion systems research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials and Chemical Engineering, School of Safety Engineering, Ningbo University of Technology, Ningbo 315211, Zhejiang, China

Zhejiang Institute of Tianjin University, Ningbo 315211, Zhejiang, China

School of Pre-school Education, Lianyungang Normal College, Lianyungang 222006, Jiangsu, China

School of Environment and Safety Engineering, North University of China, Taiyuan 030051, Shanxi, China

Shanxi Engineering Technology Research Center for Ultrafine Powder, North University of China, Taiyuan 030051, Shanxi, China

Funding

Scientific Research Project Funded by Ningbo University of Technology · Scientific Research Fund of Zhejiang Provincial Education Department

References (46)

Show source-provided references
1. 10.1016/j.elspec.2009.09.00310.1016/j.elspec.2009.09.003 ↗
2. 10.1016/j.jfoodeng.2005.11.02410.1016/j.jfoodeng.2005.11.024 ↗
3. 10.1016/j.jallcom.2017.07.11610.1016/j.jallcom.2017.07.116 ↗
4. 10.1016/j.powtec.2020.02.03510.1016/j.powtec.2020.02.035 ↗
5. 10.1016/j.jssas.2016.09.00710.1016/j.jssas.2016.09.007 ↗
6. 10.1016/j.micromeso.2012.11.03410.1016/j.micromeso.2012.11.034 ↗
7. 10.1002/jps.2188610.1002/jps.21886 ↗
8. 10.1016/j.ceramint.2021.03.00610.1016/j.ceramint.2021.03.006 ↗
9. 10.1021/acs.jpcb.6b0110010.1021/acs.jpcb.6b01100 ↗
10. 10.1016/j.jhazmat.2010.08.07210.1016/j.jhazmat.2010.08.072 ↗
11. 10.1016/j.ces.2020.11570110.1016/j.ces.2020.115701 ↗
12. 10.1016/j.jddst.2016.09.00810.1016/j.jddst.2016.09.008 ↗
13. 10.1007/s00894-019-4269-z10.1007/s00894-019-4269-z ↗
14. 10.1039/C7CE01993A10.1039/C7CE01993A ↗
15. 10.1007/s10971-015-3750-010.1007/s10971-015-3750-0 ↗
16. 10.1016/j.optlastec.2019.10567710.1016/j.optlastec.2019.105677 ↗
17. 10.1016/j.dt.2015.07.00210.1016/j.dt.2015.07.002 ↗
18. 10.1080/07370652.2019.167928110.1080/07370652.2019.1679281 ↗
19. 10.1016/j.cej.2021.13273910.1016/j.cej.2021.132739 ↗
20. 10.3390/ma1405109310.3390/ma14051093 ↗
21. 10.1021/am503845s10.1021/am503845s ↗
22. Myers, R. H. 1976. Response Surface Methodology. Ann Arbor, MI: Edwards Brothers.
23. 10.1016/j.apt.2010.09.01110.1016/j.apt.2010.09.011 ↗
24. 10.1016/j.jfoodeng.2018.08.02710.1016/j.jfoodeng.2018.08.027 ↗
25. 10.1002/prep.20150034110.1002/prep.201500341 ↗
26. 10.1016/j.powtec.2019.07.06610.1016/j.powtec.2019.07.066 ↗
27. 10.1016/j.powtec.2015.01.01610.1016/j.powtec.2015.01.016 ↗
28. 10.1021/acs.iecr.0c0544810.1021/acs.iecr.0c05448 ↗
29. 10.1016/j.chemosphere.2014.06.05010.1016/j.chemosphere.2014.06.050 ↗
30. 10.1016/j.tifs.2017.03.00910.1016/j.tifs.2017.03.009 ↗
31. 10.22211/cejem/6500010.22211/cejem/65000 ↗
32. 10.1002/sia.182910.1002/sia.1829 ↗
33. 10.1002/prep.20110008810.1002/prep.201100088 ↗
34. 10.1016/j.combustflame.2019.03.01610.1016/j.combustflame.2019.03.016 ↗
35. 10.1002/prep.20140017910.1002/prep.201400179 ↗
36. 10.1039/c9ra03394g10.1039/c9ra03394g ↗
37. 10.1080/07370652.2021.188620010.1080/07370652.2021.1886200 ↗
38. 10.1063/5.003847210.1063/5.0038472 ↗
39. 10.1016/j.cej.2019.12233310.1016/j.cej.2019.122333 ↗
40. 10.1016/j.matlet.2017.04.06710.1016/j.matlet.2017.04.067 ↗
41. 10.1016/j.cej.2020.12636010.1016/j.cej.2020.126360 ↗
42. 10.1155/2019/298179610.1155/2019/2981796 ↗
43. Zhao, X., Z. J. Li, J. H. Zhang, F. Y. Gong, B. Huang, Q. H. Zhang, Q. L. Yan, and Z. J. Yang. 2021. Regulating safety and energy release of energetic materials by manipulation of molybdenum disulfide phase. Chemical Engineering Journal 411.
44. 10.1134/s001050821501010410.1134/s0010508215010104 ↗
45. 10.1038/ncomms408710.1038/ncomms4087 ↗
46. 10.1016/j.ejps.2018.10.02610.1016/j.ejps.2018.10.026 ↗