The mechanical response of TNT and A composite, composition B, of TNT and RDX to compressive stress: II triaxial stress and yield
Source abstract
Abstract
Abstract The yield strengths and elastic properties of trinitrotoluene (TNT) and a composite (Composition B) of TNT and cyclotrimethylene trinitramine (RDX) have been studied by confined triaxial compression (uniaxial strain) as a function of temperature and strain rate. The yield strength of Composition B decreases with increasing temperature and decreasing strain rate, while more limited results for TNT indicate that the yield strength of the TNT used in this investigation decreases slightly with increasing temperature and is insensitive to strain rate. The results for Composition B can be explained in terms of thermally activated dislocation motion over short range barriers while the results for TNT indicate that dislocation motion is controlled by (athermal) long range internal stress fields. The results further indicate that the yield strengths and so the magnirudes of the long range internal stress fields are about the same for TNT and Composition B close to the TNT melting temperature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Energetic Materials and Combustion · High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Pinto J. · J. of Energetic Materials.
2. Boyle, V., Frey, R. and Blake, O. 1989. Ninth Symposium (International) on Detonation. 1989, Portland, OR.
3. Chaudhri, M. M. 1989. Ninth Symposium (International) on Detonation. 1989, Portland, OR.
4. Bourne, N. K. and Field, J. E. 1989. Ninth Symposium (International) on Detonation. 1989, Portland, OR.
5. Coffee, C. S. 1985. Eighth Symposium (International) on Detonation. 1985, Albuquerque, NM.
6. Serata S. · 1961 · 76 · 73
7. Clark N. · 1972
8. Belanger, C. 1989. Ninth Symposium (International) on Detonation. 1989, Portland, OR.
9. Schaefer, S. 1986. DEA 1218 Meeting, Test Center. June1986, Meppen, FRG.
10. Murphy, G. 1946.Advanced Mechanics of Materials, 70–85. New York: McGraw-Hill.
11. Seely, F. B. and Smith, J. O. 1959.Advanced Mechanics of Materials, 2nd Edition 76–88. New York: John Wiley & Sons.
12. Johnson, W. and Mellor, P. B. 1983.Engineering Plasticity, 62–63. New York: John Wiley & Sons.
13. Costain, T. and Motto, R. 1973. Arsenal: Tech. Report 4587, Picatinny.
14. Papoulis, A. 1984.Probability, Random Variables and Stochastic Processes, 2nd Edition 150New York: McGraw-Hill.
15. Perzyna P. · Revue Phys. Appl. · 1988 · 23 · 44510.1051/rphysap:01988002304044500 ↗
16. Li, J. C. 1968.Dislocation Dynamics, Edited by: Rosenfield, A. R., Hahn, G. T., Bement, A. L. Jr. and Jaffee, R. I. 87New York: McGraw-Hill.
17. Seeger A. · Phil. Mag. · 1955 · 40
18. Seeger A. · 1958 · 2
19. Kocks, U. F., Argon, A. S. and Ashby, M. F. 1975.Thermodynamics and Kinetics of Slip, 131New York: Pergamon Press.
20. 10.1080/1478643700823839710.1080/14786437008238397 ↗
21. Rosenfield A. R. · Trans. Am. Soc. Metals · 1966 · 59 · 962
22. Lanzerotti, M. Y., Pinto, J. and Wolfe, A. 1989. Ninth Symposium (International) on Detonation. 1989, Portland, OR. See, for example
23. Properties of Explosives of Military Interest · 1966 · 72
24. 10.1016/0001-6160(57)90003-210.1016/0001-6160(57)90003-2 ↗
25. Brown, L. M. and Ham, E. K. 1971.Strenghtening Methods in Crystals, Edited by: Kelly, A. and Nichiolson, R. B. 39England: Applied Science Publishers.
26. Ibid. · 75
27. Kelly A. · 1971
28. 10.1063/1.170289010.1063/1.1702890 ↗
29. Conrad H. · 1965
30. Miura S. · Zeitschrift fur Metallkunde · 1989 · 80 · 157
31. Honeycomb, R. 1984.Plastic Deformation of Metals, 176London: Edward Arnold, Ltd.
32. Khristenko, N. 1984.Izvestiya Akademii Nauk, Vol. 2, 164SSSR, Metally (Russian Metallurgy).