journal article·2013-04-30

Research on Detonation Growth of Lead Azide (Pb(N3)2) Microcharge

Nan Yan, Ai-Jun He, Wan-Jun Geng

Journal of Energetic Materials· Volume 31· Issue 2
Publisher page

Abstract

Abstract Microelectromechanical system (MEMS) fuzes are an important development for detonator miniaturization, leading to devices often used as input for an explosive train. The output capability of a microdetonator is strongly influenced by detonation growth of the primary explosive. In this article, research made use of a manganin piezoresistance measuring method to investigate the detonation growth properties of charges of lead azide (Pb(N3)2) at micrometer diameters and density of 80% theoretical mean density (TMD). The samples developed for this research were cylindrical charges of lead azide contained in stainless steel capsules 0.9 mm in diameter and 3 mm in height. An electrical igniter was applied to ignite the charges. The fitting curve for detonation pressure versus height of the explosive charge was obtained, revealing that the critical height of the detonation growth in the microcharge was 1.8 mm, and the detonation growth was stable at the height of the charge at 2.4 mm. The maximum detonation pressure achieved was 6.0 GPa. Keywords: deflagration-to-detonation transitiondetonation growthdetonation pressurelead azidemanganin gaugeView correction statement:Corrigendum Acknowledgments This work was supported by the Natural Science Foundation of China (No. 10971012) and the State Key Laboratory of Explosion Science and Technology (No. YBKT08-08).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Energetic Materials and Combustion · Combustion and Detonation Processes · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

a State Key Laboratory of Explosion Science and Technology , School of Mechatronical Engineering, Beijing Institute of Technology , Beijing , China

References (14)

Show source-provided references
1. Robinson , C. H. 2001 . MEMS safety and arming device for OICW. Paper read at the NDIA Small Arms Conference, August 13–16, Little Rock, AR.10.21236/ADA386187 ↗
2. Robinson , C. H. 2002 . Development and demonstration of a MEMS-based safety and arming device for the 20 mm OICW fuze. Paper read at the NDIA Joint Services Small Arms Conference, May 13–16, Atlantic City, NJ.10.21236/ADA386187 ↗
3. Sanchez , C. A. 2003 . MEMS based safe & arm development for the XM29 (OICW) weapon system update. Paper read at the 2003 Joint Services Small Arms Section Symposium, May 12–15.
4. Sanchez , C. A. 2004 . MEMS based S&A development for 25 mm HEAB munitions. Paper read at the NDIA 50th Annual Joint Services Small Arms Symposium, May 12–15.
5. Cope , R. D. 2004 . Naval Air Warfare Center Weapons Division. Paper read at the NDIA 48th Annual Fuze Conference, April 26–28, Charlotte, NC.
6. Chen F. M. · 1990
7. Cai R. J. · 1999
8. Scott , C. L. 1969 . The propagation of reaction across a lead azide–PETN interface. Paper read at the 6th International Pyrotechnics Seminar.
9. Jung P. C. · 2006
10. Madden , S. P. A. S. Tappan , P. C. Jung , S. K. Marley , E. J. Welle , and R. J. Pahl . 2006 . Rapid data analysis methodologies for streak camera images: Measurement of detonation velocity and DDT distance of lead azide at sub-millimeter diameters. Paper read at the 13th International Detonation Symposium, July 23–28, Norfolk, VA.
11. Jung , P. C. A. S. Tappan , E. J. Welle , and S. K. Marley . 2008 . Lead azide reactions at sub-millimeter diameters. Paper read at the 35th International Pyrotechnics Seminar, July 13–18, Fort Collins, CO.
12. Atsumi , M. 2002 . Shock attenuation behaviour in PMMA gap using direct pressure measurement. Paper read at the 29th International Pyrotechnics Seminar, July 14–19, Westminster, CO.
13. Detonation pressure manganin pressure sensor method. GJB772A-97 method 704.2. National Defense Science and Industry Committee .
14. Xu X. C. · Chinese Journal of Energetic Materials · 2009 · 17 · 431