Relationship between Slivering Point and Gas Generation Rules of 19-Perforation TEGDN Propellants with Different Length/Outside Diameter Ratios and Perforation Diameters
Source abstract
Abstract
In order to investigate the relationship between the slivering point and burning progressivity, a set of 19-perforation propellants containing triethylene glycol dinitrate (TEGDN) with different lengths/outside diameter ratios and perforation diameters was prepared and tested in a closed vessel. The mass fraction of burnt propellant was derived from the recorded pressure–time history of 19-perforation TEGDN propellants in the closed vessel according to the gas state equation and the form function of tested propellants. Based on the form function calculation and the mass fraction of burnt propellant, instantaneous burning surface area and the burning rate were obtained. The influence of length/outside diameter ratios and perforation diameters on the progressive combustion performance is studied through the dynamic vivacity method. With an increase in the length/outsider diameter, the slivering point occurs earlier and the slivering process lasts longer. Further, the burning progressivity of surface area can be improved. For propellants with same length/outside diameter ratio, with a decreasing of perforation diameter, the slivering point lags behind and the burning progressivity becomes greater. The slivering point corresponds to the instantaneous burning area, which is related to the form function and total burning process as well. However, the total burning progressivity of propellant is a very comprehensive result of propellant under multiple actions, including the mass fraction of burnt propellant, grain size and burning rate at different pressure regions. The correlation between them can boost a better understanding on the interaction between grain size, slivering burning process and burning progressivity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Energetic Materials and Combustion · Rocket and propulsion systems research · Advanced Combustion Engine Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing, Jiangsu, P. R. China
Funding
National Natural Science Foundation of China
References (23)
Show source-provided references
1. Anderson W. R. · 2004
2. 10.1002/1521-4087(200206)27:3<156::AID-PREP156>3.0.CO;2-P10.1002/1521-4087(200206)27:3<156::AID-PREP156>3.0.CO;2-P ↗
3. 10.1002/(ISSN)1521-408710.1002/(ISSN)1521-4087 ↗
4. Cramer, M., and J. Akester. 2004. Environmentally friendly advanced gun propellants, department of defense strategic environmental research and development program (SERDP). SERDP: AD-A447212.10.21236/ADA447212 ↗
5. Doali, J. O., A. A. Juhasz, R. E. Bowman, and W. P. Aungst. 1988. Combustion characteristics of consolidated propellants resulting from different consolidation Techniques. U.S. Army Ballistic Research Laboratory, BRL-TR-2944.
6. 10.1002/1521-4087(200206)27:3<142::AID-PREP142>3.0.CO;2-810.1002/1521-4087(200206)27:3<142::AID-PREP142>3.0.CO;2-8 ↗
7. Fischer T. S. · 2001
8. Juhasz A. A. · 1979
9. 10.1002/prep.20130015110.1002/prep.201300151 ↗
10. 10.1002/prep.v40.110.1002/prep.v40.1 ↗
11. Manning, T. G., D. Park, D. Chiu, K. Klingaman, R. Lieb, M. Leadore, B. Homan, E. Liu, D. Soucy, J. Baughn, and J. Luoma. 2006. Deveopment and performance of high energy high performance co-layered ETPE gun propellant for future large caliber system. US Army, RDECOM-ARDEC Picatinny Arsenal.
12. May, I. W., and A. A. Juhasz. 1981. Combustion processes in consolidated propellants. U.S. Army Ballistic Research Laboratory, ARBRL-MR-03108.
13. Oberle, W. F.2001. Dynamic vivacity and its application to conventional and electrothermal-chemical (ETC) closed chamber results. U.S. Army Research Laboratory, ARL-TR-2631.
14. Research-Institute-801 · 1986
15. Ruth, C. R., F. W. Robbins, T. C. Minor, and A. A. Koszoru. 1991. A new high-progressivity/high-density propulsion concept: Partially cut multiperforated stick propellant. U. S. Army Ballistic Research Lab., Aberdeen Proving Ground, BRL-TR-3189.
16. Wagner, T., J. Ritter, and B. E. Homan. 2010. Upgrades to the closed bomb facility and measurement of propellant burning rate. U.S. Army Research Laboratory, ARL-TR-5058.
17. White, K. J.1997. Effect of propellant grain dimensions on progressivity. Army Research Laboratory, Alberdeen Proving Ground, ARL-TR-1532.
18. Xiao Z. · Science and Technology of Energetic Materials · 2015 · 76 · 42
19. Xiao Z. · Chinese Journal of Ballistics · 2009 · 21 · 92
20. Xiao Z. · Journal of Ballistics · 2013 · 25 · 70
21. Xiao Z. · 2014 · 455
22. Xiao Z. · Journal of Ballistics · 2014 · 26 · 1
23. Xu H.-T. · Hanneng Cailiao/Chinese Journal of Energetic Materials · 2014 · 22 · 251