Flammability Characterization of a Polysulfide Based Ramjet Fuel
Source abstract
Abstract
This research program seeks to understand how the proportions of the fuel ingredients affect the ignition and decomposition characteristics of a novel solid ramjet fuel. The approach involves an ingredient mixture study that varies the proportions of three fuel components over a 10% range: epoxy cured polysulfide polymer, sulfur, and a perfluoropolyether. The primary objective of this work is to demonstrate the manipulation of the lower flammability limit and the thermal desorption species of the various formulations as a direct result of the doping fractions of sulfur and perfluoropolyether. Laboratory experiments include closed cup flash point testing and pyrolysis gas chromatography mass spectroscopy. The results show that, for the conditions investigated, both sulfur and perfluoropolyether act to decrease the lower flammability limit when added to polysulfide fuel. Low ignition temperature species including hydrogen sulfide are desorbed from sulfur-doped formulations. The mole fractions of diluent species decrease with the addition of either sulfur or perfluoropolyether. These experiments isolate the fundamental fuel properties by decoupling fuel behavior from combustor operating parameters such as geometry, chamber pressure, air temperature, and flux. Understanding relationships between the controlling mechanisms of solid fuel ramjet performance and fundamental fuel properties can aid in design prior to static firings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Energetic Materials and Combustion · Rocket and propulsion systems research · Combustion and Detonation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical and Aerospace Engineering, University of Alabama in Huntsville, Huntsville, AL, USA
References (15)
Show source-provided references
1. 10.1016/0010-2180(66)90059-910.1016/0010-2180(66)90059-9 ↗
2. Hertz D. L. · Elastomerics · 1984 · 116 · 17
3. Huntsman · 2010
4. Jones, D. A. 2020. “Effect of sulfur and a perfluoropolyether on the ignition and decomposition of solid fuels for ramjets: A Dissertation.” University of Alabama in Huntsville.
5. Li A. · 2016
6. 10.1016/j.fuel.2016.03.03410.1016/j.fuel.2016.03.034 ↗
7. 10.1016/j.ast.2019.01.03810.1016/j.ast.2019.01.038 ↗
8. 10.1016/j.combustflame.2017.06.00910.1016/j.combustflame.2017.06.009 ↗
9. 10.1016/j.combustflame.2016.10.01210.1016/j.combustflame.2016.10.012 ↗
10. 10.1021/ed050pA85.110.1021/ed050pA85.1 ↗
11. Rees T. M. · Journal of the Oil and Colour Chemists’ Association · 1988 · 71 · 39
12. Shepherd, J. E., and J. J. Lee. 2000. “Spark ignition energy measurements in jet A, NTSB report,” 87.
13. 10.3801/IAFSS.FSS.10-37510.3801/IAFSS.FSS.10-375 ↗
14. Toray · 2004
15. Zabetakis M. G. · 1965