journal article·2026-01-02

Study on a novel Al-B-Li alloy powder with high enthalpy of combustion

Yingcong Zhu, Aobo Hu, Runkai Huang, Xi Yang, Dong Zhang, Shuizhou Cai, Hui Zou

Journal of Energetic Materials· Volume 44· Issue 1
Publisher page

Abstract

To develop aluminum-based alloy fuels with high energy release levels and good storage stability, the series of Al-B-Li alloy powders were prepared using high-temperature gas atomization. Al-4B-5Li meets the batch preparation requirements, with the mass combustion enthalpy of 31,101 J/g, exceeding the theoretical value of pure Al powder. XRD, SEM/EDS, XPS, TG-DTA, and other methods were used to characterize the alloy powder. The results showed that at 680℃~800°C, “channels” favorable for oxygen diffusion are formed inside the particles, which promotes the complete oxidation of Al-4B-5Li at 1300°C. Al-4B-5Li exhibits a total heat release of 6317 mJ/mg and an oxidation weight gain ratio of up to 95.0%, compared to just 8.39% for pure Al powder. In addition, Al-4B-5Li has good storage stability and lower energy attenuation compared to Al-5Li. After being placed in air for two weeks, the mass combustion enthalpy still exceeds 29,500 J/g, with a decay rate of only 4.52%. And the attenuation rate of Al-5Li is 10.17%. Al-4B-5Li has excellent combustion heat, thermal oxidation performance, and storage stability, and has good application prospects in the field of energetic materials.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Energetic Materials and Combustion · Intermetallics and Advanced Alloy Properties · Thermal and Kinetic Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Huazhong University of Science and Technology

Xi’an Modern Chemistry Research Institute

Funding

National Natural Science Foundation of China

References (25)

Show source-provided references
1. 10.1016/j.combustflame.2018.04.01010.1016/j.combustflame.2018.04.010 ↗
2. 10.1002/prep.20190041410.1002/prep.201900414 ↗
3. 10.3969/j.issn.1006-9941.2012.04.01810.3969/j.issn.1006-9941.2012.04.018 ↗
4. 10.1016/0010-2180(95)00224-310.1016/0010-2180(95)00224-3 ↗
5. 10.1016/j.ast.2021.10726810.1016/j.ast.2021.107268 ↗
6. 10.1016/j.jmrt.2021.04.08110.1016/j.jmrt.2021.04.081 ↗
7. 10.1016/j.ast.2018.11.04610.1016/j.ast.2018.11.046 ↗
8. 10.1134/S001050821906014510.1134/S0010508219060145 ↗
9. 10.1016/j.combustflame.2021.11192610.1016/j.combustflame.2021.111926 ↗
10. 10.1615/IntJEnergeticMaterialsChemProp.v2.i1-6.14010.1615/IntJEnergeticMaterialsChemProp.v2.i1-6.140 ↗
11. 10.1016/j.powtec.2014.09.04810.1016/j.powtec.2014.09.048 ↗
12. 10.1016/j.combustflame.2021.11176210.1016/j.combustflame.2021.111762 ↗
13. 10.2514/2.597710.2514/2.5977 ↗
14. 10.1002/prep.20220031310.1002/prep.202200313 ↗
15. 10.2514/3.6066510.2514/3.60665 ↗
16. 10.1080/0010220059090925610.1080/00102200590909256 ↗
17. 10.1016/j.combustflame.2022.11218010.1016/j.combustflame.2022.112180 ↗
18. 10.1016/j.ast.2015.01.01410.1016/j.ast.2015.01.014 ↗
19. 10.1016/j.proci.2016.06.09910.1016/j.proci.2016.06.099 ↗
20. 10.1016/j.powtec.2018.08.03910.1016/j.powtec.2018.08.039 ↗
21. 10.1134/S001050821603014X10.1134/S001050821603014X ↗
22. 10.3969/j.issn.1672-2191.2011.04.00410.3969/j.issn.1672-2191.2011.04.004 ↗
23. 10.1016/j.combustflame.2008.10.00710.1016/j.combustflame.2008.10.007 ↗
24. 10.1002/prep.20170000510.1002/prep.201700005 ↗
25. 10.1016/j.fuel.2022.12439310.1016/j.fuel.2022.124393 ↗