Initiation Capacity of a Specially Shaped Booster Pellet and Numerical Simulation of Its Initiation Process
Source abstract
Abstract
Abstract The insensitive main charge explosive is creating new requirements for the booster pellet of detonation trains. The traditional cylindrical booster pellet has insufficient energy output to reliably initiate the insensitive main charge explosive. In this research, a concave spherical booster pellet was designed. The initiation capacity of the concave spherical booster pellet was studied using varied composition and axial steel dent methods. The initiation process of the concave spherical booster pellet was also simulated by ANSYS/LS-DYNA. The results showed that using a concave spherical booster allows a 42% reduction in the amount of explosive needed to match the initiation capacity of a conventional cylindrical booster of the same dimensions. With the other parameters kept constant, the initiation capacity of the concave spherical booster pellet increases with decreased cone angle and concave radius. The numerical simulation results are in good agreement with the experimental data. Keywords: booster pelletinitiation capacitymain charge explosivemechanics of explosionnumerical simulationspecial shape Notes a Method 2 is the main charge axial steel dent method. b Method 3 is the booster pellet axial steel dent method. c The calculated values were obtained by Lagrange interpolation of the steel dent data of main charge axial steel dent method.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Energetic Materials and Combustion · High-Velocity Impact and Material Behavior · Combustion and Detonation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
a Chemical Industry and Ecology College, North University of China , Taiyuan , P.R. China
b Jinxi Jiangyang Chemical Co., Ltd. , Taiyuan , P.R. China
References (12)
Show source-provided references
1. Department of Defense . 1994 . Department of Defense Test Method Standard: Hazard Assessment Tests for Non-Nuclear Munitions. MIL-STD-2105B. Falls Church , VA : Defense Quality and Standardization Office .
2. Hu S. Q. · Acta Armamentarii · 2002 · 2 · 188
3. Wang K. M. · Chinese Journal of Detection & Control · 1995 · 3 · 42
4. Spahn , P. F. 1993 . Booster Explosive Ring. U.S. Patent #5233929.
5. Spahn , P. F. 1993 . Embedded Can Booster. U.S. Patent #5221810.
6. Dallman , J. C. 1988 . Measurements of detonation-wave spreading and local particle velocity at the surface of 17-mm LX-07 hemisphere boosters. LA-11414-MS . Los Alamos , NM : Los Alamos National Laboratory .
7. Cao X. · 2005
8. Shi D. Y. · 2005
9. 10.1016/j.ijrmms.2009.02.00710.1016/j.ijrmms.2009.02.007 ↗
10. Technology Beijing Institute of · 1975
11. Group Explosive Theory Drafting · 1982
12. Zhang L. Y. · 1986