Fast slow cook-off simulation through scaling of thermal parameters
Source abstract
Abstract
A scaling method is proposed to speed up the numerical calculations of energetic materials subject to slow cookoff where the applied heating rate is typically of a few degrees per hour. To speed up the thermal-chemical-mechanical simulation, it is proposed that the thermal parameters and heating rate be scaled up by a large constant factor. The method was applied to simulate the Scaled Thermal Explosion Experiment (STEX) in LSDYNA using user-defined subroutines that determine the dynamics of the energetic material. A total of four valid scaling factors were tested with all the results in perfect agreement with one another in the temperature, pressure and reacted mass fraction time profiles. A fifth scale factor served as a control to demonstrate that the method is feasible if the resulting enhanced thermal velocity is below the sound speed. The computed ignition time also agreed well with the results from literature. Immediately after the cook-off was initiated, the scale factor was gradually downsized to unity with the maximum temperature and pressure attained in the ignited region computed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Energetic Materials and Combustion · Combustion and Detonation Processes · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Nanyang Technological University
References (11)
Show source-provided references
1. 10.1016/S0010-2180(97)00071-010.1016/S0010-2180(97)00071-0 ↗
2. Erikson W Schmitt R Atwood A Curran P. 2000. Jannaf 37th combustion / 19th propulsion systems hazards subcommittee joint meeting. Report No.: SAND2000-2926C. Monterey CA.
3. 10.1016/j.tecto.2015.10.01310.1016/j.tecto.2015.10.013 ↗
4. Kaneshige M, Renlund A, Schmitt R, Erikson W 2002. Cook-off experiments for model validation at Sandia National laboratories. Albuquerque (NM): Sandia National Laboratories.
5. McClelland M, Maienschein JL, Nichols AL, Wardell JF, Atwood AI, Curran PO. 2002. ALE3D model predictions abd materials characterization for the cookoff response of PBXN-109. In: No. UCRL-JC-145756. Lawrence Livermore National Lab. (LLNL). Livermore, CA (United States).
6. McGuire RR, Tarver CM 1981. Chemical-decomposition models for the thermal explosion of confined HMX, TATB, RDX, and TNT explosives. Proceedings of the Seventh International Symposium on Detonation; Annapolis (MD): USA. p 56–64.
7. 10.1016/0924-0136(94)90413-810.1016/0924-0136(94)90413-8 ↗
8. Wardell J, Maienschein J. 2002. The scaled thermal explosion experiment. In: Proceedings of the 12th International Detonation Symposium.
9. 10.1115/HT2007-3227910.1115/HT2007-32279 ↗
10. 10.1063/1.186342910.1063/1.1863429 ↗
11. Yoh J, McClelland M, Maienschein J, Nichos A, Wardell J. 2003. Towards an ideal slow cookoff model for PBXN109. In: JANNAF. Colorado Springs, CO, US.