The Effect of Flow Rate on Morphology and Deposition Area of Electrospun Nylon 6 Nanofiber
Source abstract
Abstract
Electrospinning is a process that produces continuous polymer fibers with diameters of a nanometric scale. Nylon 6 in formic acid was electrospun to obtain the nanofibers. Fibers with different diameters were obtained using flow rates of 0.1, 0.5, 1 and 1.5 mL/hr, 20 wt% solution concentration, with an applied voltage of 20 kV and 15 cm spinning distance. Flow rate influenced the fiber diameter distribution, droplet size and its initiating shape at the capillary tip, the trajectory of the jet, maintenance of Taylor cone, areal density and nanofiber morphology. The morphology of the electrospun nanofibers was analyzed by using the scanning electron microscope (SEM). The effect of flow rate on the deposition area was also investigated for better control of the process. It was observed that a stabilized Taylor cone, small average droplet size, narrowest fiber diameter distribution, more stability in the originating jet, and uniform morphology of nanofiber is obtained at a flow rate of 0.5 mL/hr.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Electrohydrodynamics and Fluid Dynamics · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Textile Engineering, Science and Research Branch, Islamic Azad University, Tehran, IRAN
Department of Polymer Engineering, Science and Research Branch, Islamic Azad University, Tehran, IRAN
References (37)
Show source-provided references
1. 10.1016/S0266-3538(03)00178-710.1016/S0266-3538(03)00178-7 ↗
2. 10.1016/S0032-3861(00)00250-010.1016/S0032-3861(00)00250-0 ↗
3. 10.1016/j.cap.2005.07.01310.1016/j.cap.2005.07.013 ↗
4. 10.1002/app.3105910.1002/app.31059 ↗
5. 10.3390/polym301041310.3390/polym3010413 ↗
6. 10.1016/j.addr.2009.07.00710.1016/j.addr.2009.07.007 ↗
7. 10.1088/1468-6996/11/1/01410810.1088/1468-6996/11/1/014108 ↗
8. 10.3390/ijms1109352910.3390/ijms11093529 ↗
9. Kang Y.O. · Journal of Biomedical Materials Research Part B: Applied Biomaterials · 2010 · 92 · 56810.1002/jbm.b.31554 ↗
10. 10.3390/s9030160910.3390/s90301609 ↗
11. Fong H. · 1999
12. Ramakrishna S. · World Scientific Publishing · 2005
13. 10.1515/IJNSNS.2004.5.3.25310.1515/IJNSNS.2004.5.3.253 ↗
14. 10.1002/macp.20040022510.1002/macp.200400225 ↗
15. 10.1016/j.polymer.2004.03.00610.1016/j.polymer.2004.03.006 ↗
16. Deitzel J. · Army Research Laboratory · 1999
17. 10.1016/j.polymer.2004.01.02410.1016/j.polymer.2004.01.024 ↗
18. 10.1016/S0032-3861(02)00136-210.1016/S0032-3861(02)00136-2 ↗
19. Taylor G.I. · Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences · 1964 · 280
20. 10.1021/ma020444a10.1021/ma020444a ↗
21. 10.1002/1521-4095(200101)13:1<70::AID-ADMA70>3.0.CO;2-H10.1002/1521-4095(200101)13:1<70::AID-ADMA70>3.0.CO;2-H ↗
22. Chowdhury M. · International Journal of Basic & Applied Sciences · 2010 · 10 · 1609
23. 10.1002/polb.2067110.1002/polb.20671 ↗
24. 10.1016/0021-9797(71)90241-410.1016/0021-9797(71)90241-4 ↗
25. 10.1021/bm050777q10.1021/bm050777q ↗
26. 10.1016/S0032-3861(02)00275-610.1016/S0032-3861(02)00275-6 ↗
27. 10.1007/s10853-009-3768-110.1007/s10853-009-3768-1 ↗
28. Rutledge G.C. · National Textile Center 2000 annual Report (M98-D01) · 2001
29. 10.1016/S0032-3861(02)00275-610.1016/S0032-3861(02)00275-6 ↗
30. 10.1002/pi.153810.1002/pi.1538 ↗
31. Hsu Ch. M. · Faculty of the Worcester polytechnic institute · 2003
32. Wong S. · ENGR 462 · 2010
33. 10.1002/app.2766410.1002/app.27664 ↗
34. Ksapabutr B. · CMU. Journal · 2005 · 4 · 109
35. 10.1007/BF0321909010.1007/BF03219090 ↗
36. 10.1063/1.297583410.1063/1.2975834 ↗
37. 10.1016/j.polymer.2008.07.04310.1016/j.polymer.2008.07.043 ↗