journal article·2017-06

Mechanical and Thermal Properties of Kenaf Fiber Reinforced Polypropylene/Magnesium Hydroxide Composites

C. H. Lee, S. M. Sapuan, M. R. Hassan

Publisher page

Abstract

This paper presents a study of the mechanical and thermal properties of kenaf fiber (KF) reinforced polypropylene (PP)/magnesium hydroxide (MH) composites. Pure PP samples show low tensile, flexural and flame retardant properties. It was found that KF and MH filler insertion improved the properties of PP composites. The incremental addition of KF fiber between 0 and 20 weight percent in composites results in higher tensile modulus and decomposed mass loss at onset temperature, but lower tensile strength, elongation, flexural strength and onset temperature. Addition of 25 wt% KF produces slightly higher flexural strength. Increasing the volume of MH filler in the composites caused lower strength, tensile modulus and elongation, but higher onset temperature and 2 nd peak temperature in thermogravimetric analysis (TGA) testing. Increasing the KF content in the PP matrix resulted in lower mass residue. Increasing the KF content in composites containing MH increased the mass residue at the end of the testing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Electromagnetic wave absorption materials · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Depart. of Mechanical Engineering, The University of Sheffield, Sheffield UNITED KINGDOM

Depart. of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Serdang, Selangor MALAYSIA

Laboratory of Biocomposite Technology, Universiti Putra Malaysia, Serdang, Selangor MALAYSIA

References (55)

Show source-provided references
1. Maleque M. · Arabian Journal for Science and Engineering · 2007 · 32 · 359
2. 10.1080/0360255080205945110.1080/03602550802059451 ↗
3. 10.1016/j.matdes.2007.11.00410.1016/j.matdes.2007.11.004 ↗
4. 10.1080/0360255050037403810.1080/03602550500374038 ↗
5. 10.1016/j.indcrop.2008.05.00310.1016/j.indcrop.2008.05.003 ↗
6. 10.1016/j.carbpol.2012.07.07310.1016/j.carbpol.2012.07.073 ↗
7. Rashdi A. A. A. · Journal of Food, Agriculture and Environment · 2009 · 7 · 908
8. 10.1016/j.matdes.2008.05.06010.1016/j.matdes.2008.05.060 ↗
9. 10.1016/j.proeng.2011.04.33910.1016/j.proeng.2011.04.339 ↗
10. 10.1016/j.matdes.2014.11.02410.1016/j.matdes.2014.11.024 ↗
11. 10.1007/s10853-010-5134-810.1007/s10853-010-5134-8 ↗
12. 10.1016/j.compositesb.2008.11.00810.1016/j.compositesb.2008.11.008 ↗
13. 10.1016/j.carbpol.2014.03.03910.1016/j.carbpol.2014.03.039 ↗
14. 10.1016/j.matdes.2015.07.13910.1016/j.matdes.2015.07.139 ↗
15. 10.1016/j.polymdegradstab.2013.03.00610.1016/j.polymdegradstab.2013.03.006 ↗
16. 10.1016/j.compositesa.2015.06.02110.1016/j.compositesa.2015.06.021 ↗
17. 10.1016/j.compositesb.2014.10.01010.1016/j.compositesb.2014.10.010 ↗
18. 10.1016/j.polymdegradstab.2012.03.03410.1016/j.polymdegradstab.2012.03.034 ↗
19. 10.1016/j.compositesb.2012.09.02710.1016/j.compositesb.2012.09.027 ↗
20. 10.1016/j.compositesb.2013.02.02910.1016/j.compositesb.2013.02.029 ↗
21. 10.1016/j.compositesb.2014.02.01110.1016/j.compositesb.2014.02.011 ↗
22. 10.1016/j.proeng.2014.12.26410.1016/j.proeng.2014.12.264 ↗
23. 10.1016/j.compositesb.2014.06.01910.1016/j.compositesb.2014.06.019 ↗
24. 10.1016/j.compositesa.2013.01.00710.1016/j.compositesa.2013.01.007 ↗
25. 10.1016/j.matdes.2012.06.02610.1016/j.matdes.2012.06.026 ↗
26. 10.1016/j.indcrop.2015.03.01310.1016/j.indcrop.2015.03.013 ↗
27. 10.1016/j.carbpol.2010.05.01510.1016/j.carbpol.2010.05.015 ↗
28. 10.1007/s10924-012-0516-410.1007/s10924-012-0516-4 ↗
29. 10.1155/2014/51403610.1155/2014/514036 ↗
30. Ismail A. · Sains Malaysiana · 2013 · 42 · 429
31. 10.1016/j.jiec.2013.10.02010.1016/j.jiec.2013.10.020 ↗
32. 10.1002/app.3896010.1002/app.38960 ↗
33. 10.1016/S0141-3910(03)00280-510.1016/S0141-3910(03)00280-5 ↗
34. 10.1016/j.polymdegradstab.2010.04.01410.1016/j.polymdegradstab.2010.04.014 ↗
35. Ridzuan R. · International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering · 2013 · 7 · 445
36. 10.1016/j.compositesb.2009.04.00510.1016/j.compositesb.2009.04.005 ↗
37. ASTM D638–14; Standard Test Method for Tensile Properties of Plastics; ASTM International; West Conshohocken, PA, 2014; www.astm.org.
38. ASTM D790–10; Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials; ASTM International, West Conshohocken, PA, 2010; www.astm.org.
39. 10.1016/j.conbuildmat.2015.07.14310.1016/j.conbuildmat.2015.07.143 ↗
40. 10.1016/j.matdes.2014.10.07810.1016/j.matdes.2014.10.078 ↗
41. 10.1016/j.indcrop.2015.05.08010.1016/j.indcrop.2015.05.080 ↗
42. 10.1016/j.compscitech.2009.04.00410.1016/j.compscitech.2009.04.004 ↗
43. LiuS. P.; Flame retardant and mechanical properties of polyethylene/ magnesium hydroxide/montmorillonite nanocomposites; 2014, 20, 2401–2408.10.1016/j.jiec.2013.10.020 ↗
44. 10.1016/j.polymdegradstab.2012.05.01110.1016/j.polymdegradstab.2012.05.011 ↗
45. 10.1016/j.compstruct.2015.07.11210.1016/j.compstruct.2015.07.112 ↗
46. 10.4028/www.scientific.net/AMM.695.70910.4028/www.scientific.net/AMM.695.709 ↗
47. Keller D. · Journal of Food, Agriculture and Environment · 2000 · 8 · 91
48. MdRadzi M. K. F. · Pertanika J. Trop. Agric. Sci. · 2015 · 38 · 583
49. 10.1016/j.polymer.2012.10.00410.1016/j.polymer.2012.10.004 ↗
50. 10.1016/j.matdes.2013.03.10210.1016/j.matdes.2013.03.102 ↗
51. Ismail A. · Sains Malaysiana · 2013 · 42 · 429
52. 10.1016/j.polymdegradstab.2004.01.01910.1016/j.polymdegradstab.2004.01.019 ↗
53. Pilarska A. · Open Chem. · 2015 · 13 · 16110.1515/chem-2015-0024 ↗
54. Gašparovič L. · 36th International Conference of SSCHE; Tatranské Matliare, Slovakia · 2009 · 1781
55. 10.1016/j.tca.2008.10.02510.1016/j.tca.2008.10.025 ↗