journal article·2017-06Open access

Effect of Surface Biopolymeric Treatment on Sisal Fiber Properties and Fiber-Cement Bond

Paulo R. L. Lima, Heni Mirna Santos, Geany Peruch Camilloto, Renato Souza Cruz

Abstract

Sisal fiber, available in various semi-arid regions around the world, is the most studied natural fiber for the reinforcement of polymeric and cement-based composites. However, to improve the fiber–matrix interaction and to reduce the hydrophilicity of the fiber, it is necessary to establish surface treatments that employ sustainable materials, unlike conventional surface treatments. In this work, sisal fibers were coated separately with cellulose acetate, hydrophobic starch, and cassava starch biopolymers in order to verify the possibility of reducing the water absorption capacity of the fiber by the use of a biodegradable resin. A combination of Fourier transform infrared spectroscopy, scanning electron microscopy, and water absorption and tensile tests was used to investigate the effects of the surface treatments on the sisal fiber properties. Pullout tests of sisal fibers with embedded lengths of 20 mm and 40 mm were performed to determine the influence of the treatments on the bond stress with cement mortar. Composites with 4 vol % short fiber were produced and tested for flexion. The study results indicated that all treatments reduced the mechanical properties of the fiber; however, the layer of the cellulose acetate biopolymer film formed on the fiber surface was effective in reducing the fiber hydrophilicity. Experimental tests on the composites revealed that the cellulose acetate treatment reduced the bond stress and, to a lesser degree, the flexural toughness of the composite, despite the increase in flexural strength.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Bamboo properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State University of Feira de Santana Technology, Feira de Santana, Bahia BRAZIL

References (54)

Show source-provided references
1. 10.1016/j.conbuildmat.2009.10.03010.1016/j.conbuildmat.2009.10.030 ↗
2. 10.1016/j.matdes.2010.04.01310.1016/j.matdes.2010.04.013 ↗
3. 10.1016/j.matdes.2009.06.02310.1016/j.matdes.2009.06.023 ↗
4. 10.1016/j.matdes.2012.08.03810.1016/j.matdes.2012.08.038 ↗
5. 10.1177/15589250120070041210.1177/155892501200700412 ↗
6. 10.1166/jbmb.2010.107410.1166/jbmb.2010.1074 ↗
7. 10.4322/polimeros.2013.04410.4322/polimeros.2013.044 ↗
8. 10.1590/S0103-9016201100010000110.1590/S0103-90162011000100001 ↗
9. Melo Filho JA · 2012
10. 10.4028/www.scientific.net/KEM.600.42110.4028/www.scientific.net/KEM.600.421 ↗
11. 10.1016/j.matdes.2013.11.02310.1016/j.matdes.2013.11.023 ↗
12. 10.1016/S0266-3538(01)00046-X10.1016/S0266-3538(01)00046-X ↗
13. 10.1002/(SICI)1097-4628(19960222)59:8<1329::AID-APP17>3.0.CO;2-010.1002/(SICI)1097-4628(19960222)59:8<1329::AID-APP17>3.0.CO;2-0 ↗
14. 10.1016/S0958-9465(02)00018-510.1016/S0958-9465(02)00018-5 ↗
15. Mai YW · Sci. · 1983 · 18 · 2156
16. 10.1016/0010-4361(84)90726-210.1016/0010-4361(84)90726-2 ↗
17. Coutts RSP · Concr. · 1983 · 5 · 257
18. Toledo FilhoR.D. Natural fibre reinforced mortar composites: experimental characterization, PhD thesis, DEC-PUC-Rio, Brazil, 1997. p. 472.
19. 10.1016/B978-0-08-045316-3.00018-110.1016/B978-0-08-045316-3.00018-1 ↗
20. Ferreira SR · Materia. · 2012 · 17 · 1024
21. 10.4028/www.scientific.net/MSF.636-637.25310.4028/www.scientific.net/MSF.636-637.253 ↗
22. 10.1002/pen.1084610.1002/pen.10846 ↗
23. CristaldiG, LatteriA, ReccaG, CicalaG. Composites Based on Natural Fibre Fabrics, Woven Fabric Engineering, Polona Dobnik Dubrovski (Ed.), InTech, DOI: 10.5772/10465. Available from: http://www.intechopen.com/books/woven-fabric-engineering/composites-based-on-natural-fibre-fabrics, 2015.
24. 10.1007/BF0247225810.1007/BF02472258 ↗
25. 10.1016/S0958-9465(99)00039-610.1016/S0958-9465(99)00039-6 ↗
26. 10.1016/j.apsusc.2013.12.05410.1016/j.apsusc.2013.12.054 ↗
27. 10.1016/j.progpolymsci.2012.04.00310.1016/j.progpolymsci.2012.04.003 ↗
28. 10.1002/pc.1068410.1002/pc.10684 ↗
29. 10.1016/j.carbpol.2007.05.04010.1016/j.carbpol.2007.05.040 ↗
30. 10.1007/BF0293127310.1007/BF02931273 ↗
31. 10.1016/j.progpolymsci.2008.12.00210.1016/j.progpolymsci.2008.12.002 ↗
32. 10.1023/A:102101392191610.1023/A:1021013921916 ↗
33. 10.1016/j.compscitech.2005.06.01810.1016/j.compscitech.2005.06.018 ↗
34. 10.1016/j.compositesa.2003.09.01510.1016/j.compositesa.2003.09.015 ↗
35. 10.1177/15589250140090040710.1177/155892501400900407 ↗
36. Disponible in: http://www.science.marshall.edu/murraye/alpha_amylase.htm. Accessible in 20 may 2016.
37. Lima PRL · Ambiente Construído. · 2008 · 8 · 7
38. Rio de Janeiro · 3
39. 10.4028/www.scientific.net/KEM.634.41010.4028/www.scientific.net/KEM.634.410 ↗
40. LimaPRL. Análise teórica e experimental de compósitos reforçados com fibras de sisal. Thesis (Civil Engineering) COPPEDEC/UFRJ, 2004. 263 p.
41. 10.1016/j.compositesb.2005.04.00110.1016/j.compositesb.2005.04.001 ↗
42. 10.1016/j.compositesa.2010.05.00710.1016/j.compositesa.2010.05.007 ↗
43. 10.1016/j.compositesa.2012.07.01210.1016/j.compositesa.2012.07.012 ↗
44. 10.1590/S0104-6632200800020001410.1590/S0104-66322008000200014 ↗
45. 10.1002/app.2085110.1002/app.20851 ↗
46. 10.1016/j.conbuildmat.2015.10.12010.1016/j.conbuildmat.2015.10.120 ↗
47. 10.1016/j.carbpol.2015.03.02110.1016/j.carbpol.2015.03.021 ↗
48. 10.1016/j.matdes.2012.09.04810.1016/j.matdes.2012.09.048 ↗
49. 10.1590/S0100-6916201400050000210.1590/S0100-69162014000500002 ↗
50. 10.1177/15589250130080020310.1177/155892501300800203 ↗
51. 10.1016/j.apsusc.2013.12.05410.1016/j.apsusc.2013.12.054 ↗
52. 10.1016/j.compositesa.2015.08.03810.1016/j.compositesa.2015.08.038 ↗
53. 10.1016/j.polymertesting.2012.07.00110.1016/j.polymertesting.2012.07.001 ↗
54. 10.1016/j.conbuildmat.2014.12.11910.1016/j.conbuildmat.2014.12.119 ↗