Design of winding pattern of filament-wound composite pressure vessel with unequal openings based on non-geodesics
Source abstract
Abstract
In this article, we proposed a new approach to design the winding patterns of filament-wound composite pressure vessel with unequal polar openings with non-geodesics. To ensure the continuity of winding angles between trajectories along the cylinder and the dome, the non-geodesics for cylindrical part were used. The developed winding patterns of the vessels were simulated using the MATLAB software to verify the feasibility of the acquired trajectories. To demonstrate the performance in designing the winding path for big polar ratios, we analyzed vessels with polar pole ratios of 1:2–1:4, respectively. The developed winding patterns have successfully achieved uniform fiber distributions along the mandrel without severe overlap, except for the polar pole regions. To avoid the severe overlap between filament bands, we further studied the relationship among the winding pattern, bandwidth, and the number of tangent points, and derived a suitable bandwidth based on the winding pattern. These simulated results proved the effectiveness of the developed method in design of winding pattern with unequal polar openings.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Engineering and Vibrations Research · Mechanical Behavior of Composites · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Astronautics, Northwestern Polytechnical University, Xi’an, China
Xi’an Aerospace Composites Research Institute, Xi’an, China
Xi’an Institute of Aerospace Solid Propulsion Technology, Xi’an, China
Funding
Joint Fund of Advanced Aerospace Manufacturing Technology Research
References (32)
Show source-provided references
1. 10.31399/asm.tb.cfw.978162708338610.31399/asm.tb.cfw.9781627083386 ↗
2. Koussios S. · 2004
3. 10.1016/j.compstruct.2018.02.06910.1016/j.compstruct.2018.02.069 ↗
4. 10.1016/j.compscitech.2008.09.01810.1016/j.compscitech.2008.09.018 ↗
5. 10.1016/j.compstruct.2003.09.01910.1016/j.compstruct.2003.09.019 ↗
6. 10.1016/S0034-3617(06)70912-210.1016/S0034-3617(06)70912-2 ↗
7. 10.1016/S1359-835X(01)00008-210.1016/S1359-835X(01)00008-2 ↗
8. 10.1016/j.compstruct.2016.06.00310.1016/j.compstruct.2016.06.003 ↗
9. 10.1177/002199831668323810.1177/0021998316683238 ↗
10. 10.1016/j.compstruct.2004.02.00310.1016/j.compstruct.2004.02.003 ↗
11. 10.1016/j.compscitech.2007.07.02010.1016/j.compscitech.2007.07.020 ↗
12. 10.1016/j.ijhydene.2015.06.15610.1016/j.ijhydene.2015.06.156 ↗
13. 10.1016/j.compstruct.2017.07.05410.1016/j.compstruct.2017.07.054 ↗
14. 10.1016/j.compositesa.2007.11.00210.1016/j.compositesa.2007.11.002 ↗
15. 10.1016/j.compstruct.2008.05.01710.1016/j.compstruct.2008.05.017 ↗
16. 10.1016/j.compstruct.2004.09.00610.1016/j.compstruct.2004.09.006 ↗
17. 10.1016/j.compstruct.2012.01.01810.1016/j.compstruct.2012.01.018 ↗
18. 10.1016/0961-9526(95)93979-610.1016/0961-9526(95)93979-6 ↗
19. 10.1016/0956-7143(94)90014-010.1016/0956-7143(94)90014-0 ↗
20. De Carvalho J · Compos Part A: Appl S · 1995 · 6 · 79
21. 10.1016/j.compstruct.2009.07.01310.1016/j.compstruct.2009.07.013 ↗
22. 10.1243/146442005X1018410.1243/146442005X10184 ↗
23. Koussios S
24. 10.1016/j.compstruct.2014.06.00910.1016/j.compstruct.2014.06.009 ↗
25. 10.1016/j.cad.2006.12.00310.1016/j.cad.2006.12.003 ↗
26. 10.1016/j.ijhydene.2009.10.06210.1016/j.ijhydene.2009.10.062 ↗
27. 10.1016/j.compositesa.2010.05.01510.1016/j.compositesa.2010.05.015 ↗
28. 10.1016/0961-9526(94)90084-110.1016/0961-9526(94)90084-1 ↗
29. 10.1177/002199831560232510.1177/0021998315602325 ↗
30. 10.1016/j.compstruct.2016.11.02210.1016/j.compstruct.2016.11.022 ↗
31. 10.1016/S1359-835X(97)00073-010.1016/S1359-835X(97)00073-0 ↗
32. 10.1016/S1359-835X(97)00091-210.1016/S1359-835X(97)00091-2 ↗