journal article·2018-06Open access

Formation of Surface Morphology in Polyacrylonitrile (PAN) Fibers during Wet-Spinning

Yu Wang, Yuanjian Tong, Bowen Zhang, Hua Su, Lianghua Xu

Abstract

The effects of concentration of dimethyl sulfoxide (DMSO) in the coagulation bath, draw ratio and extrusion speed on surface roughness of polyacrylonitrile (PAN) fibers prepared by wet spinning and dry-jet wet spinning were investigated. The surface roughness was much higher for PAN fibers produced by wet spinning than dry-jet wet spinning. The surface roughness of the fiber increased linearly with increasing concentration of DMSO in the coagulation bath. Higher roughness was observed at higher draw ratios during spinning. The surface roughness of the PAN fibers decreased initially until at 90m/h, then increased with further increases in extrusion speed. A mechanism for formation of PAN fiber surface morphology based on deformation of the soft skins of single fibers during solidification of PAN/DMSO solution caused by stress perpendicular to the fiber axis is proposed. The stress results from recovery of the aligned PAN macromolecules due to shear in the spinneret during extrusion.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Recycling and Waste Management Techniques · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of organic-inorganic composites, Beijing University of Chemical Technology, Beijing CHINA

References (19)

Show source-provided references
1. 10.1002/app.3379610.1002/app.33796 ↗
2. 10.1016/j.compositesa.2010.09.00810.1016/j.compositesa.2010.09.008 ↗
3. 10.1016/j.compscitech.2007.06.01010.1016/j.compscitech.2007.06.010 ↗
4. 10.1016/j.polymer.2006.03.06710.1016/j.polymer.2006.03.067 ↗
5. 10.1016/S1005-0302(12)60181-910.1016/S1005-0302(12)60181-9 ↗
6. 10.1016/j.carbon.2015.02.02610.1016/j.carbon.2015.02.026 ↗
7. 10.1016/j.compscitech.2005.05.00810.1016/j.compscitech.2005.05.008 ↗
8. 10.1016/j.synthmet.2005.07.34010.1016/j.synthmet.2005.07.340 ↗
9. 10.1016/S1872-5805(08)60021-910.1016/S1872-5805(08)60021-9 ↗
10. 10.1016/j.desal.2013.09.02210.1016/j.desal.2013.09.022 ↗
11. 10.1016/j.apsusc.2009.05.00910.1016/j.apsusc.2009.05.009 ↗
12. 10.1002/app.2684010.1002/app.26840 ↗
13. 10.1016/j.apsusc.2010.11.17710.1016/j.apsusc.2010.11.177 ↗
14. 10.1016/S0008-6223(97)00185-110.1016/S0008-6223(97)00185-1 ↗
15. 10.1016/j.eurpolymj.2015.01.02810.1016/j.eurpolymj.2015.01.028 ↗
16. 10.1016/j.desal.2015.04.02710.1016/j.desal.2015.04.027 ↗
17. Peng L · Marine Pollution Bulletin · 2015 · 93 · 75
18. 10.1016/j.porgcoat.2015.03.01110.1016/j.porgcoat.2015.03.011 ↗
19. 10.1016/j.seppur.2006.05.01610.1016/j.seppur.2006.05.016 ↗