Tensile and interfacial properties of dry-jet wet-spun and wet-spun polyacrylonitrile-based carbon fibers at cryogenic condition
Source abstract
Abstract
For carbon fiber–reinforced polymer composites applied in aerospace industry, the mechanical performance of carbon fiber in extreme temperature environment is of great importance. In this study, carbon fiber produced by dry-jet wet spinning and wet spinning approaches were cryogenically conditioned at different cooling rates. After cryogenically conditioned at sharp cooling rate, both fibers have around 10% decreases in tensile strength due to the huge hoop stress induced by the quenching process. However, after cryogenically conditioned at slow cooling rate, the interfacial shear strength between the two kinds of carbon fibers and epoxy resin was significantly enhanced. Furthermore, scanning electron microscopy, atomic force microscopy, and the Raman spectroscopy were conducted to detect the micro-structures and surface morphologies of the cryogenically conditioned carbon fibers. This study provided fundamental data for the material design and application of the carbon fiber at extreme temperature environments such as aerospace or other industrial fields.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Tribology and Wear Analysis · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Fashion Technology, Shanghai University of Engineering Science, Shanghai, China
Key Laboratory of Textile Science & Technology, Ministry of Education, Donghua University, Shanghai, China
College of Textiles, Donghua University, Shanghai, China
Research Center for Analysis and Measurement, Donghua University, Shanghai, China
References (24)
Show source-provided references
1. 10.1016/B978-0-85709-523-7.00001-310.1016/B978-0-85709-523-7.00001-3 ↗
2. 10.1016/j.compscitech.2003.12.00710.1016/j.compscitech.2003.12.007 ↗
3. 10.1007/s40195-014-0106-710.1007/s40195-014-0106-7 ↗
4. Grimsley BW · Int SAMPE Tech Conf · 2001 · 33 · 1224
5. 10.1016/S1359-835X(99)00060-310.1016/S1359-835X(99)00060-3 ↗
6. 10.1016/j.compositesb.2016.08.03410.1016/j.compositesb.2016.08.034 ↗
7. 10.1016/j.compositesb.2016.10.08210.1016/j.compositesb.2016.10.082 ↗
8. 10.1016/S1359-835X(01)00126-910.1016/S1359-835X(01)00126-9 ↗
9. 10.1016/S0266-3538(02)00063-510.1016/S0266-3538(02)00063-5 ↗
10. 10.1016/j.compositesb.2017.05.07710.1016/j.compositesb.2017.05.077 ↗
11. 10.1016/j.carbon.2011.07.05510.1016/j.carbon.2011.07.055 ↗
12. 10.1016/j.compositesb.2016.05.05610.1016/j.compositesb.2016.05.056 ↗
13. 10.1007/s11340-015-0007-310.1007/s11340-015-0007-3 ↗
14. 10.1177/004051751453216110.1177/0040517514532161 ↗
15. 10.1177/004051751454076810.1177/0040517514540768 ↗
16. 10.1177/004051751247436310.1177/0040517512474363 ↗
17. 10.1002/app.2692910.1002/app.26929 ↗
18. 10.1002/app.3102010.1002/app.31020 ↗
19. 10.1016/S1359-835X(98)00038-410.1016/S1359-835X(98)00038-4 ↗
20. 10.1023/A:101458081480310.1023/A:1014580814803 ↗
21. 10.1163/15685610376286469710.1163/156856103762864697 ↗
22. 10.1163/156856193X0056510.1163/156856193X00565 ↗
23. 10.1007/BF0058107110.1007/BF00581071 ↗
24. 10.1002/adv.1986.06006040810.1002/adv.1986.060060408 ↗