Effects of air gap, fibre type and blend ratio on sound absorption performance of needle-punched non-woven fabrics
Source abstract
Abstract
This article reports a study on the effect of different natural fibres, their blend ratios and varying air gaps between a needle-punched non-woven fabric and polystyrene backing on the sound absorption coefficients of the needle-punched non-woven fabrics. These parameters as well as their interactive effects were studied by variance analysis. The air gap varied from 0 to 25 mm in 5 mm increments; three natural fibre types (agave, flax and waste wool) were used; each one blended with polyester fibres in three blending ratios. The univariate test of significance showed that all three parameters and two of the three two-way interactions effects on sound absorption coefficients were significant. Only two-way interaction effect between blend ratio and air gap on sound absorption coefficient was not significant. It was found that the sound absorption coefficients increased with an increase in air gap size up to 15 mm, after which they decreased slightly as the air gap was increased further to 25 mm. In addition, the non-woven fabrics produced from the blend of waste wool and polyester fibres achieved the highest sound absorption coefficients than those of the other two natural fibres, and generally, the sound absorption coefficients increased with the increase in polyester fibre content in each blend studied.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Acoustic Wave Phenomena Research · Noise Effects and Management · Hearing Loss and Rehabilitation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
CSIR, Material Science and Manufacturing, Port Elizabeth, South Africa
Nelson Mandela University, Port Elizabeth, South Africa
Department of Clothing and Textile Technology, Faculty of Engineering and Built Environment, Cape Peninsula University of Technology, Cape Town, South Africa
Funding
african laser centre, council for scientific and industrial research
References (24)
Show source-provided references
1. Peters RJ · 2011
2. Teli MD · Indian J Fibre Text · 2007 · 32 · 202
3. Sengupta S. · Indian J Fibre Text · 2010 · 35 · 237
4. 10.1177/004051751559041210.1177/0040517515590412 ↗
5. Mirjalili SA · Fibres Text East Eur · 2012 · 20 · 73
6. 10.1177/152808371244695610.1177/1528083712446956 ↗
7. Jayaraman KA. · 2005
8. 10.1177/152808370934712410.1177/1528083709347124 ↗
9. 10.1016/j.enbuild.2015.01.05610.1016/j.enbuild.2015.01.056 ↗
10. 10.1177/004051750606339310.1177/0040517506063393 ↗
11. Seddeq H. · Aust J Basic Appl Sci · 2009 · 3 · 4610
12. 10.1002/app.3331210.1002/app.33312 ↗
13. 10.1177/004051750708428310.1177/0040517507084283 ↗
14. 10.1177/004051751559974210.1177/0040517515599742 ↗
15. Feng NJ · J Vib Control · 2014 · 22 · 2861
16. 10.1016/j.apacoust.2010.10.00510.1016/j.apacoust.2010.10.005 ↗
17. ASTM E1050: 2010. Standard test method for impedance and absorption of acoustical materials using a tube, two microphones and a digital frequency analysis system.
18. LMS Test.Lab · 2011
19. ASTM D3776: 1996. Standard test methods for mass per unit area (weight) of fabric.
20. EDANA WSP 120.6: 2005. Standard test methods for the nonwovens and related industries thickness.
21. 10.1016/0003-682X(95)00042-810.1016/0003-682X(95)00042-8 ↗
22. Lee Y · AUTEX Res J · 2003 · 3 · 7810.1515/aut-2003-030205 ↗
23. Tascan M. · 2005
24. 10.1002/9780470172568.ch810.1002/9780470172568.ch8 ↗