Experimental study on the structure and properties of modified nonwoven filter fibers by impregnation with carbon black
Source abstract
Abstract
With the increasingly serious air pollution, it is urgent to build a good indoor environment. How to improve performance of filter fiber materials has become the mainstream approach. In this article, the structure and filtration performances of nonwoven filter fibers before and after impregnation with carbon black were tested and analyzed. The results showed that a carbon black coating layer was wrapped on the surfaces of the changed nonwoven fabric filter fibers. The porosity of fibers decreased from 97.81% to 95.35%. The filtration efficiency of PM 1.0 , PM 2.5 , and PM 10 increased by 16.8%, 28.0%, and 11.7%, respectively, at the best filtration velocity of 0.8 m/s. The filtration efficiency of PM 2.5 had the most significant improvement. But the resistance increased by 1.18 times at the same time. The matching between filtration efficiency and resistance should be considered in using. This study provides reference value for the synthesis and application of new filter materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Air Quality and Health Impacts · Aerosol Filtration and Electrostatic Precipitation · Vehicle emissions and performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Building Services Science and Engineering, Xi’an University of Architecture and Technology, Xi’an, China
Funding
shanghai municipal education commission · national natural science foundation of china · the National Key R&D Program of China
References (33)
Show source-provided references
1. 10.1016/j.apr.2018.04.01110.1016/j.apr.2018.04.011 ↗
2. 10.1016/j.apr.2018.11.01210.1016/j.apr.2018.11.012 ↗
3. 10.1016/j.chemosphere.2019.04.22610.1016/j.chemosphere.2019.04.226 ↗
4. 10.1016/j.envpol.2019.05.00410.1016/j.envpol.2019.05.004 ↗
5. Liu L. · 2014
6. 10.1016/j.envpol.2014.03.00410.1016/j.envpol.2014.03.004 ↗
7. 10.1016/j.envint.2014.10.00510.1016/j.envint.2014.10.005 ↗
8. Sothen R. · 2009
9. 10.1186/2052-336X-12-2710.1186/2052-336X-12-27 ↗
10. Xu ZL · HVAC · 1997 · 1 · 5
11. Wang XF. · 2016
12. 10.1080/23744731.2018.145245410.1080/23744731.2018.1452454 ↗
13. 10.2298/TSCI1904291Z10.2298/TSCI1904291Z ↗
14. Zhu S · J Eng Fiberi Fabr · 2018 · 13 · 60
15. 10.1016/j.seppur.2016.11.01010.1016/j.seppur.2016.11.010 ↗
16. 10.2298/TSCI1603953C10.2298/TSCI1603953C ↗
17. 10.1016/j.seppur.2017.11.06710.1016/j.seppur.2017.11.067 ↗
18. 10.1016/j.buildenv.2017.08.04010.1016/j.buildenv.2017.08.040 ↗
19. 10.2298/TSCI1504349S10.2298/TSCI1504349S ↗
20. 10.1002/smll.20160192410.1002/smll.201601924 ↗
21. Li S · J Eng Fiberi Fabr · 2019 · 14 · 1
22. Sakthivel S · J Eng Fiberi Fabr · 2014 · 9 · 149
23. Tang M · J Eng Fiberi Fabr · 2016 · 11 · 1
24. Liu C · Nat Commun · 2015 · 6
25. 10.1016/j.buildenv.2018.06.02110.1016/j.buildenv.2018.06.021 ↗
26. 10.1016/j.apsusc.2014.10.14810.1016/j.apsusc.2014.10.148 ↗
27. Wang ZC · HVAC · 2012 · 42 · 8
28. 10.1016/j.atmosenv.2014.09.00710.1016/j.atmosenv.2014.09.007 ↗
29. 10.1016/0021-8502(95)00045-310.1016/0021-8502(95)00045-3 ↗
30. 10.1080/0895837049044318710.1080/08958370490443187 ↗
31. 10.1021/es203607d10.1021/es203607d ↗
32. Huang HL. · 2016
33. 10.1039/C8TA04539A10.1039/C8TA04539A ↗