journal article·2024-08Open access

Additive manufacturing of high-performance, flexible 3D siloxane-based scintillators through the sol-gel route

Sara Maria Carturan, Hanna Skliarova, Giorgia Franchin, Giada Bombardelli, Alice Zanini, Felix Eduardo Pino Andrades, Jessica Carolina Delgado Alvarez, Sandra Moretto, Gianluigi Maggioni, Walter Raniero, Devid Maniglio, Anna Paola Caricato, Alberto Quaranta

Abstract

A novel method for the production of high-performing, flexible 3D-printed siloxane-based scintillators is here described. It consists in the synthesis via sol-gel of phenyl-bearing siloxane resins with methacrylate functionalities suitable of photopolymerization by UV illumination, therefore shaped at desired geometries through additive manufacturing, namely digital light processing (DLP). Both hydrolytic and non-hydrolytic sol-gel approaches are adopted to promote the reactivity of diphenyl bearing alkoxysilane precursors and to control phase separation of dimethyl and diphenyl rich domains. The structural evolution during the sol-gel reactions is investigated by Fourier transform infrared spectroscopy (FTIR), which is also exploited to assess photocuring, after addition of diphenyl 2,4,6 trimethyl - benzoyl phosphine oxide (TPO) as UV initiator. The optical properties after addition of suitable fluorophores are studied by excitation/emission spectroscopy. Once defined the best formulations as for optical clarity, mechanical toughness and extent of photocuring, thin disks of scintillators are produced by UV illumination and exposed to α particles to define the light output values. The gathered scintillation light has been compared to the one from standard, non-flexible plastic scintillator EJ-212, resulting in values up to 44%. Photorheology is used to assess the printability by DLP, monitoring UV curing times and complex modulus plateau. Tensile tests are performed aiming to observe the stress-deformation behaviour of representative siloxane-based resins obtained by either simple casting or DLP, to get insight on possible variations induced by the fabrication technology. To assess printing resolution and capabilities, selected formulations of photocurable polysiloxanes scintillators are 3D printed by DLP in forms of benchmark shapes, i.e. gyroid and Kelvin cell, and printing quality is derived by scanning electron microscopy (SEM), while their scintillation upon 4.5 MeV H+ ion beam irradiation is gathered by CCD camera observations, affording beam spot image reconstruction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicone and Siloxane Chemistry · CCD and CMOS Imaging Sensors · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Shashlik calorimeters: Novel compact prototypes for the ENUBET experiment
2. Demonstrating a single-block 3D-segmented plastic-scintillator detector10.1088/1748-0221/16/12/P12010 ↗
3. A fully-active fine-grained detector with three readout views10.1088/1748-0221/13/02/P02006 ↗
4. Review of plastic and liquid scintillation dosimetry for photon, electron, and proton therapy10.1088/0031-9155/61/20/R305 ↗
5. Quality assurance in proton beam therapy using a plastic scintillator and a commercially available digital camera10.1002/acm2.12143 ↗
6. Ionization quenching correction for a 3D scintillator detector exposed to scanning proton beams10.1088/1361-6560/ab7876 ↗
7. Synchronized high-speed scintillation imaging of proton beams, generated by a gantry-mounted synchrocyclotron, on a pulse-by-pulse basis10.1002/mp.15826 ↗
8. 3D dosimetry for proton therapy10.1088/1742-6596/1305/1/012038 ↗
9. Characterizing the response of miniature scintillation detectors when irradiated with proton beams10.1088/0031-9155/53/7/004 ↗
10. Flexible fully organic indirect detector for megaelectronvolts proton beams10.1038/s41528-022-00229-w ↗
11. Additive manufacturing of fine-granularity optically-isolated plastic scintillator elements10.1088/1748-0221/17/10/P10045 ↗
12. Characterization of novel 3D printed plastic scintillation dosimeters10.1088/2057-1976/aba880 ↗
13. Enhanced characteristics of 3D-Printed plastic scintillators based on bisphenol fluorene diacrylates10.1016/j.radphyschem.2022.110255 ↗
14. Improved 3D Printing Plastic Scintillator Fabrication10.3938/jkps.73.887 ↗
15. Development of organic scintillators10.1016/0029-554X(79)90729-8 ↗
16. Influence of fluorescent dopants on the vat photopolymerization of acrylate-based plastic scintillators for application in neutron/gamma pulse shape discrimination
17. A feasibility study of using a 3D-printed tumor model scintillator to verify the energy absorbed to a tumor10.1016/j.net.2021.03.033 ↗
18. Investigation of the light output of 3D-printed plastic scintillators for dosimetry applications10.1016/j.radmeas.2022.106864 ↗
19. Polysiloxane-Based Scintillators
20. Impact of temperature on light yield and pulse shape discrimination of polysiloxane-based organic scintillators formulated with commercial resins
21. Polysiloxane Scintillators for Efficient Neutron and Gamma-Ray Pulse Shape Discrimination10.1021/acsapm.0c00641 ↗
22. Dosimetric considerations for moldable silicone composites used in radiotherapy applications10.1002/acm2.13605 ↗
23. A motion model-guided 4D dose reconstruction for pencil beam scanned proton therapy10.1088/1361-6560/acd518 ↗
24. Effects of silane precursors on curing behavior of UV-curable hybrid coatings: A photo-DSC study10.1007/s10973-014-4071-1 ↗
25. Siloxane Hybrid Material-Encapsulated Highly Robust Flexible μlEDs for Biocompatible Lighting Applications10.1021/acsami.2c03922 ↗
26. Preparation and performance of ultraviolet curable silicone resins used for ultraviolet cured coating and ultraviolet-assisted 3D printing materials10.1364/OSAC.1.000542 ↗
27. Non-hydrolytic sol-gel synthesis of epoxysilane-based inorganic-organic hybrid resins10.1016/j.matchemphys.2008.06.070 ↗
28. Enhanced Characteristics of 3D-Printed Plastic Scintillators Based on Bisphenol Fluorene Diacrylates
29. Fabrication of a high thermal-stable methacrylate-silicate hybrid nanocomposite: Hydrolytic versus non-hydrolytic sol-gel synthesis of methacryl-oligosiloxanes10.1007/s10971-011-2630-5 ↗
30. ORMOCER®s for Optical Interconnection Technology10.1023/A:1008755607488 ↗
31. Thermally stable transparent sol-gel based siloxane hybrid material with high refractive index for light emitting diode (LED) encapsulation10.1021/cm100903b ↗
32. A distributed data acquisition system for signal digitizers with on-line analysis capabilities
33. Analysis of hydrolysis process of γ-methacryloxypropyltrimethoxysilane and its influence on the formation of silane coatings on 6063 aluminum alloy10.1016/j.apsusc.2009.02.022 ↗
34. Temperature dependent microstructure of MTES modified hydrophobic silica aerogels10.1016/j.matlet.2010.11.026 ↗
35. Vibrational spectra of phenyltriethoxysilane, phenyltrimethoxysilane and their sol-gels10.1016/j.saa.2008.04.027 ↗
36. High performance encapsulant for light-emitting diodes (LEDs) by a sol-gel derived hydrogen siloxane hybrid10.1039/c2jm16907j ↗
37. A hybrid organic-inorganic sol-gel coating for protecting aluminium alloy 7075-T6 against corrosion in Harrison's solution10.1007/s10971-014-3278-8 ↗
38. ORMOCER ® s for Optical Interconnection Technology10.1023/A:1008755607488 ↗
39. Synthesis and molecular structure analysis of nano-sized methacryl-grafted polysiloxane resin for fabrication of nano hybrid materials10.1002/polb.20346 ↗
40. Thermal stability of sol-gel derived methacrylate oligosiloxane-based hybrids for LED encapsulants10.1007/s10971-009-2117-9 ↗
41. Spectroscopy and photophysics of methylphenylsiloxaneand diphenylsiloxane-based molecules and polymers10.1163/156856701317051761 ↗
42. Poly(phenylsiloxanes) Electronic Spectra10.1021/ma00169a041 ↗
43. Molecular insights into sequence distributions and conformation-dependent properties of high-phenyl polysiloxanes
44. Characterization of polysiloxane organic scintillators produced with different phenyl containing blends10.1016/j.matchemphys.2012.10.041 ↗
45. Temperature dependence of the fluorescence quantum yields of diphenylsiloxane-based copolymers in dilute solutions10.1002/polb.10151 ↗
46. Optical and scintillation properties of polydimethyl-diphenylsiloxane based organic scintillators10.1109/TNS.2010.2042817 ↗
47. Red emitting phenyl-polysiloxane based scintillators for neutron detection10.1109/TNS.2014.2302036 ↗
48. Valeur · 2001
49. Alkyl Conformation and π−π Interaction Dependent on Polymorphism in the 1,8-Naphthalimide (NI) Derivative10.1021/acsomega.9b02377 ↗
50. Facile synthesis, sensor activity and logic behaviour of 4-aryloxy substituted 1,8-naphthalimide10.1016/j.jphotochem.2013.01.008 ↗
51. SRIM – The stopping and range of ions in matter (2010)10.1016/j.nimb.2010.02.091 ↗
52. Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing