Effects of Manufacturing-Induced Voids on Local Failure in Polymer-Based Composites
Source abstract
Abstract
This paper presents results of a computational study focused on examining the role of manufacturing-induced voids in the initiation and growth of damage at the microstructural level in polymer matrix composites loaded in tension normal to fibers. The polymer deformation is described by an improved macromolecular constitutive model accounting for strain-rate-, pressure-, and temperature-sensitive yielding, isotropic hardening before peak yield, intrinsic postyield softening, and rapid anisotropic hardening at large strains. A new craze model that accounts for craze initiation, growth, and breakdown mechanisms is employed. An energy-based criterion is used for cavitation induced cracking that can lead to fiber/matrix debonding. The role of voids is clarified by conducting a comparative study of unit cells with and without voids. The effects of strain rate and temperature are investigated by a parametric study. The overall composite stress-strain response is also depicted to indicate manifestation of microlevel failure on macroscopic behavior.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Aerospace Engineering, Texas A&M University, College Station, TX 77843
References (46)
Show source-provided references
1. Micro Scale Flow Behavior and Void Formation Mechanism During Impregnation Through a Unidirectional Stitched Fiberglass Mat
2. Voids and Their Effects on the Mechanical Properties of Composites; An Appraisal
3. The Influence of Porosity on the Interlaminar Shear Strength of Carbon/Epoxy and Carbon/Bismaleimide Fabric Laminates10.1016/S0266-3538(01)00157-9 ↗
4. Strain Field Inhomogeneities and Stiffness Changes in GMT Containing Voids10.1016/S1359-835X(01)00056-2 ↗
5. Effect of Void Content on the Mechanical Properties of Carbon/Epoxy Laminates
6. Effects of Void Geometry on Elastic Properties of Unidirectional Fiber Reinforced Composites10.1016/j.compscitech.2005.02.019 ↗
7. Rubber-Toughening in Polypropylene10.1002/app.1985.070300617 ↗
8. Microfailure Behavior of Randomly Dispersed Short Fibre Reinforced Thermoplastic Composites Obtained by Direct SEM Observation10.1007/BF01184987 ↗
9. Effect of Voids on Failure Mechanisms in RTM Laminates10.1016/0266-3538(95)00024-0 ↗
10. Determination of the Effect of Seawater on the Interfacial Strength of an Interlayer e-Glass/Graphite/Epoxy Composite by in Situ Observation of Transverse Cracking in an Environmental SEM10.1016/S0266-3538(96)00170-4 ↗
11. A Criterion for Crack Initiation in Glassy Polymers Subjected to a Composite-Like Stress State10.1016/S0266-3538(96)00090-5 ↗
12. Prediction of Matrix-Initiated Transverse Failure in Polymer Composites10.1016/0266-3538(96)00074-7 ↗
13. A Note on the Effects of Voids Upon the Hygral and Mechanical Properties of AS4/3502 Graphite/Epoxy10.1177/002199838702100306 ↗
14. Void Effects on the Interlaminar Shear Strength of Unidirectional Graphite-Fiber-Reinforced Composites10.1177/002199839202601006 ↗
15. Role of Porosity in Estimates of Composite Elastic-Constants10.1115/1.2906023 ↗
16. Reduction in Interlaminar Shear Strength by Discrete and Distributed Voids10.1016/0266-3538(95)00128-X ↗
17. Nemat-Nasser
18. Dynamic Shear Band Development in Plane Strain10.1115/1.3176046 ↗
19. Efficient Large Scale Non-Linear Transient Analysis by Finite Elements10.1002/nme.1620100308 ↗
20. Transient Shell Response by Numerical Time Integration10.1002/nme.1620070305 ↗
21. A Theory for the Low Temperature Plastic Deformation of Glassy Polymers
22. Large Inelastic Deformation of Glassy Polymers, Part I: Rate Dependent Constitutive Model10.1016/0167-6636(88)90003-8 ↗
23. A Three-Dimensional Constitutive Model for Large Stretch Behaviour of Rubber Materials10.1016/0022-5096(93)90013-6 ↗
24. On Improved Network Models for Rubber Elasticity and Their Applications to Orientation Hardening in Glassy Polymers10.1016/0022-5096(93)90043-F ↗
25. Computational Aspects of Localized Deformations in Amorphous Glassy Polymers
26. A Tangent Modulus Method for Rate Dependent Solids10.1016/0045-7949(84)90033-6 ↗
27. Chowdhury, K. A., Benzerga, A. A., and Talreja, R., 2007, “A Computational Framework for Analyzing the Dynamic Response of Glassy Polymers,” unpublished.
28. Initiation and Growth of Crazes in Glassy Polymers
29. Mechanisms of Toughening Brittle Polymers
30. Chowdhury, K. A., Benzerga, A. A., and Talreja, R., 2007, “A Model for Polymer Fracture by Craze Initiation to Breakdown,” unpublished.
31. Chowdhury, K. A. , 2007, “Damage Initiation, Progression and Failure of Polymer Based Composites Due to Manufacturing Induced Defects,” Ph.D. thesis, Texas A & M University, College Station, TX.
32. Yielding of Glassy Polymers in the Second Quadrant of Principal Stress Space10.1080/00222347308201636 ↗
33. On Modeling the Deformation and Fracture Response of Glassy Polymers Due to Shear Yielding and Crazing10.1016/j.ijsolstr.2004.01.017 ↗
34. Chowdhury, K. A., Benzerga, A. A., and Talreja, R., 2008, “An Analysis of Impact-Induced Deformation and Fracture Modes in Amorphous Glassy Polymers,” Eng. Fract. Mech.0013-7944, published online: 10.1016/j.engfracmech.2007.08.007.
35. A General Critical-Strain Criterion for Crazing in Amorphous Polymers10.1080/14786437308221002 ↗
36. Haward
37. Micromechanics of Coalescence in Ductile Fracture10.1016/S0022-5096(01)00125-9 ↗
38. Influence of Voids on Shear Band Instabilities Under Plane Strain Conditions10.1007/BF00036191 ↗
39. Finite Element Analysis of Localization in Plasticity
40. Self-Reinforced Composite Poly(Methylmethacrylate): Static and Fatigue Properties10.1016/0142-9612(95)98900-Y ↗
41. Aligned Single-Wall Carbon Nanotubes in Composites by Melt Processing Methods10.1016/S0009-2614(00)01013-7 ↗
42. Mechanical Behavior of Alumina/Poly(Methyl Methacrylate) Nanocomposites10.1021/ma0354400 ↗
43. Dynamic Mechanical Study on Unidirectional Polyethylene Fibers-PMMA and Glass Fibers-PMMA Composite Laminates10.1002/(SICI)1097-4628(19960502)60:5<657::AID-APP2>3.0.CO;2-P ↗
44. Effects of Initial Anisotropy on the Finite Strain Deformation Behavior of Glassy Polymers10.1016/0749-6419(93)90052-R ↗
45. Effects of Strain Rate, Temperature and Thermomechanical Coupling on the Finite Strain Deformation of Glassy Polymers10.1016/0167-6636(94)00034-E ↗
46. Experimental Study of Strain-Rate-Dependent Behavior of Carbon/Epoxy Composite10.1016/S0266-3538(02)00100-8 ↗