journal article·2011-04-01

Uniaxial Strain and Stress-Controlled Cyclic Responses of Ultrahigh Molecular Weight Polyethylene: Experiments and Model Simulations

Tasnim Hassan, Ozgen U. Çolak, Patricia M. Clayton

Publisher page

Abstract

Thermoplastics such as ultrahigh molecular weight polyethylene (UHMWPE) are used for a wide variety of applications, such as bearing material in total replacement of knee and hip components, seals, gears, and unlubricated bearing. Accurate prediction of stresses and deformations of UHMWPE components under service conditions is essential for the design and analysis of these components. This, in turn, requires a cyclic, viscoplastic constitutive model that can simulate cyclic responses of UHMWPE under a wide variety of uniaxial and multiaxial, strain, and stress-controlled cyclic loading. Such a constitutive model validated against a broad set of experimental responses is not available mainly because of the lack of experimental data of UHMWPE. Toward achieving such a model, this study conducted a systematic set of uniaxial experiments on UHMWPE thin-walled, tubular specimens by prescribing strain and stress-controlled cyclic loading. The tubular specimen was designed so that both uniaxial and biaxial experiments can be conducted using one type of specimen. The experimental responses developed are presented for demonstrating the cyclic and ratcheting responses of UHMWPE under uniaxial loading. The responses also are scrutinized for determining the applicability of the thin-walled, tubular specimen in conducting large strain cyclic experiments. A unified state variable theory, the viscoplasticity theory based on overstress for polymers (VBOP) is implemented to simulate the recorded uniaxial responses of UHMWPE. The state of the VBOP model simulation is discussed and model improvements needed are suggested.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Fatigue and fracture mechanics · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil, Construction and Environmental Engineering, North Carolina State University, Raleigh, NC 27695

Department of Mechanical Engineering, Yildiz Technical University, 34349 Yildiz-Istanbul, Turkey

Department of Civil, Construction and Environmental Engineering, North Carolina State University, Raleigh, NC

References (41)

Show source-provided references
1. Advances in the Processing, Sterilization, and Crosslinking of Ultra-High Molecular Weight Polyethylene for Total Joint Arthroplasty
2. The Application of Plastics in Dynamic Seals
3. “An Historical Review of Studies of Polymeric Seals in Reciprocating Hydraulic Systems10.1243/1350650991542956 ↗
4. A New Approach for Polymer Composite Gear Design10.1016/j.wear.2006.06.005 ↗
5. Mechanical Characterization and Finite Element Modeling of Cyclic Stress-Strain Behavior of Ultra High Molecular Weight Polyethylene
6. A Viscoplasticity Constitutive Model for Polymeric Materials
7. Modeling Viscoelastic and Viscoplastic Behavior of High Density Polyethylene (HDPE)
8. Modeling Deformation Behavior of Polymers With Viscoplasticity Theory Based on Overstress10.1016/j.ijplas.2004.04.004 ↗
9. Constitutive Modeling of Ultra-High Molecular Weight Polyethylene Under Large-Deformation and Cyclic Loading Conditions
10. Constitutive Modeling of the Large Strain Time-Dependent Behavior of Elastomers
11. Role of Cyclic Plastic Deformation in the Wear of UHMWPE Acetabular Cups
12. Wear of Polyethylene Acetabular Components in Total Hip Arthroplasty: An Analysis of One Hundred and Twenty-Eight Components Retrieved at Autopsy or Revision Operations
13. Wear and Periprosthetic Osteolysis10.1097/00003086-200112000-00007 ↗
14. Ultra High Molecular Weight Polyethylene: Mechanics, Morphology, and Clinical Behavior
15. The Yielding, Plastic Flow, and Fracture Behavior of Ultra-High Molecular Weight Polyethylene Used in Total Joint Replacements10.1016/S0142-9612(98)00112-4 ↗
16. Deformation, Yielding, Fracture and Fatigue Behavior of Conventional and Highly Cross-Linked Ultra High Molecular Weight Polyethylene10.1016/j.biomaterials.2004.03.022 ↗
17. The Combined Effect of Crosslinking and High Crystallinity on the Microstructural and Mechanical Properties of Ultra High Molecular Weight Polyethylene
18. An Energy-Based Model for the Wear of UHMWPE
19. Fatigue Crack Propagation Behavior of ultra High Molecular Weight Polyethylene Under Mixed Mode Condition10.1002/jbm.820280207 ↗
20. Residual Stresses in Ultra-High Molecular Weight Polyethylene Loaded Cyclically by a Rigid Moving Indenter in Nonconforming Geometries10.1002/jor.1100160114 ↗
21. Cyclic Steady State Stress-Strain Behavior of UHMWPE
22. Effects of Strain Rate, Temperature and Thermomechanical Coupling of the Finite Strain Deformation of Glassy Polymers
23. Comparative Cyclic Stress-Strain and Fatigue Resistance Behavior of Electron-Beam and Gamma-Irradiated Ultrahigh Molecular Weight Polyethylene10.1002/jbm.b.30033 ↗
24. Comparative Fatigue Behavior and Toughness of Remelted and Annealed Highly Crosslinked Polyethylene10.1002/jbm.b.30807 ↗
25. Ratcheting of Cyclically Hardening and Softening Materials, Part I: Uniaxial Behavior
26. Ratcheting of Cyclically Hardening and Softening Materials, Part II: Multiaxial Behavior
27. Macro Versus Micro Scale Cyclic Plasticity Models in Simulating Nonproportional Cyclic and Ratcheting Responses of Stainless Steel 30410.1016/j.ijplas.2008.12.009 ↗
28. Changes in Mechanical Behavior During Fatigue of Semicrystalline Thermoplastics
29. Cyclic Deformation Behavior of an Epoxy Polymer. Part I: Experimental Investigation
30. Ratcheting Behavior of PTFE Under Cyclic Compression
31. Ratcheting Behavior of an Epoxy Polymer and Its Effect on Fatigue Life
32. Uniaxial Ratcheting Behavior of Vulcanized Natural Rubber
33. A Simple Constitutive Model for Cyclic Compressive Ratcheting Deformation of Polytetrafluoroethylene (PTFE) With Stress Rate Effects10.1002/pen.20813 ↗
34. Cyclic Viscoplasticity of Semicrystalline Polymers10.1016/j.mechrescom.2009.10.001 ↗
35. Prediction of Two Nonlinear Viscoelastic Constitutive Relations for Polymers Under Multiaxial Loadings10.1002/pen.20731 ↗
36. Biaxial Cyclic Deformation of an Epoxy Resin: Experiments and Constitutive Modeling10.1007/s10853-005-6302-0 ↗
37. Ratcheting in Cyclical Plasticity, Part I: Uniaxial Behavior10.1016/0749-6419(92)90040-J ↗
38. Ratcheting in Cyclical Plasticity, Part II: Multiaxial Behavior10.1016/0749-6419(92)90010-A ↗
39. Models of Viscoplasticity—Some Comments on Equilibrium (Back) Stress and Drag Stress10.1007/BF01175712 ↗
40. A Small Strain Viscoplasticity Theory Based on Overstress10.1016/B978-012425970-6/50007-2 ↗
41. Viscoplasticity Theory Applied to Proportional and Non-Proportional Cyclic Loading at Small Strains10.1016/j.ijplas.2003.07.002 ↗