A Unified Phenomenological Model for Tensile and Compressive Response of Polymeric Foams
Source abstract
Abstract
Tensile and compressive stress-strain responses were obtained for various densities of polymer foams. These experimental data were used to determine relevant engineering parameters (such as elastic moduli in tension and compression, ultimate tensile strength, etc.) as a function of foam density. A phenomenological model applicable for both compressive and tensile responses of polymeric foams is validated by comparing the model to the experimentally obtained compression and tensile responses. The model parameters were analyzed to determine the effect of each parameter on the mechanical response of the foam. The engineering parameters were later compared to the appropriate model parameters and a good correlation was obtained. It was shown that the model indeed captures the entire compressive and tensile response of polymeric foams effectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Polymer composites and self-healing · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL 32611
Mechanical Engineering, California Institute of Technology, Pasadena, CA 91125
References (30)
Show source-provided references
1. Long-Term Tensile and Compressive Behavior of Polymer Foams10.1177/0021955X06063511 ↗
2. Mechanical Properties of Crete, a Polyurethane Foam10.1002/(SICI)1097-4628(19980516)68:7<1045::AID-APP2>3.0.CO;2-F ↗
3. Tensile and Fracture Behavior of Polymer Foams10.1016/j.msea.2006.05.133 ↗
4. Failure of Cellular Foams Under Multiaxial Loading10.1016/S1359-835X(01)00110-5 ↗
5. Size Effect and Asymptotic Matching Analysis of Fracture of Closed-Cell Polymeric Foam10.1016/S0020-7683(03)00362-7 ↗
6. Evaluation of Cushioning Properties of Plastic Foams From Compressive Measurements10.1002/pen.760211505 ↗
7. Determination of the Local Stress-Strain Response of Foams10.1115/1.1546242 ↗
8. Load-Compression Behavior of Brittle Foams10.1002/app.1970.070140514 ↗
9. Load-Compression Behavior of Flexible Foams10.1002/app.1969.070131106 ↗
10. Energy Absorption in Polymeric Foams10.1002/app.1970.070140905 ↗
11. Mechanical Behavior of Foamed Materials Under Dynamic Compression10.1177/0021955X7401000306 ↗
12. Constitutive Modeling and Simulation of Energy Absorbing Polyurethane Foam Under Impact Loading10.1002/pen.760321611 ↗
13. A Phenomenological Constitutive Model for Foams Under Large Deformations10.1002/pen.20041 ↗
14. Hilyard10.1007/978-94-011-1256-7 ↗
15. Gibson10.1017/CBO9781139878326 ↗
16. Effects of Cell Shape and Strut Cross-Sectional Area Variations on the Elastic Properties of Three-Dimensional Open-Cell Foams
17. Effects of Cell Shape and Cell Wall Thickness Variations on the Elastic Properties of Two-Dimensional Cellular Solids10.1016/j.ijsolstr.2004.08.005 ↗
18. Compressive Response of Open Cell Foams. Part II: Initiation and Evolution of Crushing10.1016/j.ijsolstr.2004.07.024 ↗
19. Compressive Response of Open-Cell Foams. Part I: Morphology and Elastic Properties10.1016/j.ijsolstr.2004.07.023 ↗
20. Crushability Maps for Structural Polymeric Foams in Uniaxial Loading Under Rigid Confinement10.1007/BF02427895 ↗
21. A Parametric Study on Crushability of Open-Cell Structural Polymeric Foams10.1007/s10934-005-1652-1 ↗
22. Mechanical Models of Cellular Solids: Parameters Identification From Experimental Tests10.1016/j.ijimpeng.2006.06.012 ↗
23. Behavior Pattern and Parametric Characterization for Low Density Crushable Foams
24. Structural Foams
25. Quasistatic and High Strain Rate Uniaxial Compressive Response of Polymeric Structural Foams10.1016/j.ijimpeng.2004.11.006 ↗
26. ASTM Standard D1621-00, “Standard Test Method for Compressive Properties of Rigid Cellular Plastics,” ASTM International, West Conshohocken, PA, www.astm.org.
27. ASTM Standard C273-00, “Standard Test Method for Shear Properties of Sandwich Core Materials,” ASTM International, West Conshohocken, PA, www.astm.org.
28. Ashby
29. Compressive Strain at the Onset of Densification of Cellular Solids10.1177/0021955X06063519 ↗
30. Stiffness and Strength—Rigid Plastic Foams