journal article·2013-10-01

Focused Ion Beam Induced Surface Damage Effect on the Mechanical Properties of Silicon Nanowires

Tatsuya Fujii, Takahiro Namazu, Koichi Sudoh, Shouichi Sakakihara, Shozo Inoue

Publisher page

Abstract

In this paper, the effect of surface damage induced by focused ion beam (FIB) fabrication on the mechanical properties of silicon (Si) nanowires (NWs) was investigated. Uniaxial tensile testing of the NWs was performed using a reusable on-chip tensile test device with 1000 pairs of comb structures working as an electrostatic force actuator, a capacitive displacement sensor, and a force sensor. Si NWs were made from silicon-on-nothing (SON) membranes that were produced by deep reactive ion etching hole fabrication and ultrahigh vacuum annealing. Micro probe manipulation and film deposition functions in a FIB system were used to bond SON membranes to the device's sample stage and then to directly fabricate Si NWs on the device. All the NWs showed brittle fracture in ambient air. The Young's modulus of 57 nm-wide NW was 107.4 GPa, which was increased to 144.2 GPa with increasing the width to 221 nm. The fracture strength ranged from 3.9 GPa to 7.3 GPa. By assuming the thickness of FIB-induced damage layer, the Young's modulus of the layer was estimated to be 96.2 GPa, which was in good agreement with the literature value for amorphous Si.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Mechanical Systems, Department of Mechanical and Systems Engineering, University of Hyogo, 2167 Shosha, Himeji, Hyogo 671-2201, Japan

Associate Professor Division of Mechanical Systems, Department of Mechanical and Systems Engineering, University of Hyogo, 2167 Shosha, Himeji, Hyogo 671-2201, Japan; JST PRESTO, Japan Science and Technology Agency, 4-1-8 Honcho, Kawaguchi, Saitama 332-0012, Japan e-mail:

The Institute of Scientific and Industrial Research, Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka 567-0047, Japan

References (53)

Show source-provided references
1. Nanorobots, NEMS, and Nanoassembly
2. Design, Fabrication, and Characterization of a Submicroelectromechanical Resonator With Monolithically Integrated CMOS Readout Circuit10.1109/JMEMS.2005.844845 ↗
3. Electrical Control of the Ferromagnetic Phase Transition in Cobalt At Room Temperature10.1038/nmat3130 ↗
4. Monolithically Integrated Gas Distribution Chamber for Silicon MEMS Fuel Cells10.1109/JMEMS.2010.2041039 ↗
5. Silicon Carbide MEMS for Harsh Environments10.1109/5.704265 ↗
6. Ti-Ni Shape Memory Alloy Film-Actuated Microstructures for a MEMS Probe Card10.1088/0960-1317/17/1/020 ↗
7. Anisotropic Etching of Silicon in TMAH Solutions10.1016/0924-4247(92)80139-T ↗
8. Fabrication of Densely Arrayed Micro-Needles With Flow Channels by Mechanical Dicing and Anisotropic Wet Etching10.1088/0960-1317/16/8/039 ↗
9. Guidelines for Etching Silicon MEMS Structures Using Fluorine High-Density Plasmas at Cryogenic Temperatures10.1109/JMEMS.2002.800928 ↗
10. Fabrication, Characterization, and Analysis of a DRIE CMOS-MEMS Gyroscope10.1109/JSEN.2003.817901 ↗
11. Three-Dimensional Nanostructure Fabrication by Focused-Ion-Beam Chemical Vapor Deposition10.1116/1.1319689 ↗
12. Free-Space-Wiring Fabrication in Nano-Space by Focused-Ion-Beam Chemical Vapor Deposition10.1116/1.1630329 ↗
13. Li, B., Tang, X., Xie, H., and Zhang, X., 2003, “Focused Ion Beam (FIB) Nano-Machining and FIB Moire Technique for Strain Analysis in MEMS/NEMS Structures and Devices,” Proceedings of the 16th IEEE International Conference on Microelectromechanical Systems (MEMS-2003), Kyoto, Japan, January 19–23, pp. 674–677.10.1109/MEMSYS.2003.1189839
14. Nano-Scale Fatigue Study of LPCVD Silicon Nitride Thin Films Using a Mechanical-Amplifier Actuator10.1088/0960-1317/17/5/013 ↗
15. Nanomechanical Structures With 91 MHz Resonance Frequency Fabricated by Local Deposition and Dry Etching10.1116/1.1761240 ↗
16. Fabrication of Si Nanostructures With an Atomic Force Microscope10.1063/1.111746 ↗
17. Chemical Approach to Nanofabrication: Modifications of Silicon Surfaces Patterned by Scanning Probe Anodization10.1143/JJAP.34.3406 ↗
18. Evaluation of Size Effect on Mechanical Properties of Single Crystal Silicon by Nanoscale Bending Test Using AFM10.1109/84.896765 ↗
19. Plastic Deformation of Nanometric Single Crystal Silicon Wire in AFM Bending Test at Intermediate Temperatures10.1109/84.993447 ↗
20. Specimen Size Effect on Tensile Strength of Surface-Micromachined Polycrystalline Silicon Thin Films10.1109/84.661392 ↗
21. Quasi-Static Bending Test of Nano-Scale SiO2 Wire at Intermediate Temperatures Using AFM-Based Technique10.1016/S0924-4247(02)00431-4 ↗
22. Fatigue Life Prediction Criterion for Micro-Nanoscale Single-Crystal Silicon Structures10.1109/JMEMS.2008.2008583 ↗
23. Mechanical Properties of Si Nanowires as Revealed by In Situ Transmission Electron Microscopy and Molecular Dynamics Simulations10.1021/nl204282y ↗
24. Mechanical Properties of Vapor-Liquid-Solid Synthesized Silicon Nanowires10.1021/nl902132w ↗
25. Microtensile Testing of Free-Standing Polysilicon Fibers of Various Grain Sizes10.1088/0960-1317/3/1/004 ↗
26. Sharpe, W. N., Jr., Yuan, B., and Vaidyanathan, R., 1997, “Measurements of Young's Modulus, Poisson's Ratio, and Tensile Strength of Polysilicon,” Proceedings of the Tenth IEEE International Workshop on Microelectromechanical Systems, (MEM'97), Nagoya, Japan, January 26–30, pp. 424–429.10.1109/MEMSYS.1997.58188110.1109/MEMSYS.1997.581881 ↗
27. Tensile Testing of Silicon Film Having Different Crystallographic Orientations Carried Out on a Silicon Chip10.1016/S0924-4247(98)00125-3 ↗
28. Evaluation of Mechanical Materials Properties by Means of Surface Micromachined Structures10.1016/S0924-4247(98)00348-3 ↗
29. Measurement of the Bending Strength of Vapor-Liquid-Solid Grown Silicon Nanowires10.1021/nl052223z ↗
30. Fracture Strength and Fatigue of Polysilicon Determined by a Novel Thermal Actuator10.1109/16.848302 ↗
31. Cross Comparison of Thin-Film Tensile-Testing Methods Examined Using Single-Crystal Silicon, Polysilicon, Nickel, and Titanium Films
32. Microscale Material Testing of Single Crystalline Silicon: Process Effects on Surface Morphology and Tensile Strength
33. Fujii, T., Sudoh, K., Inoue, S., and Namazu, T., 2013, “Direct Tensile Testing of Sub-100nm-Size Silicon Nanowires Fabricated by FIB-Sampling of SON Membranes,” Proceedings of the 26th IEEE International Conference on Microelectromechanical Systems (MEMS 2013), Taipei, China, January 20–24, pp. 488–491.10.1109/MEMSYS.2013.647428510.1109/MEMSYS.2013.6474285 ↗
34. Mechanical Characteristics of FIB Deposited Carbon Nanowires Using an Electrostatic Actuated Nano Tensile Testing Device10.1109/JMEMS.2006.889663 ↗
35. Electrostatic Tensile Testing Device With Nanonewton and Nanometer Resolution and Its Application to C60 Nanowire Testing10.1109/JMEMS.2011.2182503 ↗
36. An Electromechanical Material Testing System for In Situ Electron Microscopy and Applications10.1073/pnas.0506544102 ↗
37. Void Shape Evolution and Formation of Silicon-on-Nothing Structures During Hydrogen Annealing of Hole Arrays on Si(001)10.1063/1.3116545 ↗
38. Empty-Space-in-Silicon Technique for Fabricating a Silicon-on-Nothing Structure10.1063/1.1324987 ↗
39. Fabrication of Silicon-on-Nothing Structure by Substrate Engineering Using the Empty-Space-in-Silicon Formation Technique10.1143/JJAP.43.12 ↗
40. Development of AFM Tensile Test Technique for Evaluating Mechanical Properties of Sub-Micron Thick DLC Films10.1109/JMEMS.2005.859196 ↗
41. The Effect of Temperature on Fracture Toughness in a Single-Crystal-Silicon Film and Transition in Its Fracture Mode10.1088/0960-1317/18/1/015026 ↗
42. Exceptional Plasticity of Silicon Nanobridges10.1088/0957-4484/22/35/355704 ↗
43. Measurement of Elastic Constants at Low Temperatures by Means of Ultrasonic Waves Data for Silicon and Germanium Single Crystals, and for Fused Silica10.1063/1.1721449 ↗
44. FIB Damage of Cu and Possible Consequences for Miniaturized Mechanical Tests10.1016/j.msea.2007.01.046 ↗
45. Effects of Focused Ion Beam Induced Damage on the Plasticity of Micropillars10.1103/PhysRevB.80.104104 ↗
46. Effects of Focused-Ion-Beam Irradiation and Prestraining on the Mechanical Properties of FCC Au Microparticles on a Sapphire Substrate10.1557/jmr.2011.221 ↗
47. Surface Damage Induced by Focused-Ion-Beam Milling in a Si/Si p-n Junction Cross-Sectional Specimen10.1016/j.apsusc.2004.09.092 ↗
48. 1998 · 207
49. Mechanical Testing of Isolated Amorphous Silicon Slanted Nanorods10.1166/jnn.2005.425 ↗
50. Elastic Constants of Defected and Amorphous Silicon With the Environment-Dependent Interatomic Potential10.1103/PhysRevB.70.134113 ↗
51. 2003 · 96
52. The Statistical Approach to Engineering Design in Ceramics
53. Effect of Temperature on Fracture Toughness in a Single-Crystal-Silicon Film and Transition in Its Fracture Mode10.1088/0960-1317/18/1/015026 ↗