journal article·2015-07-01

Influences of Exothermic Reactive Layer and Metal Interlayer on Fracture Behavior of Reactively Bonded Solder Joints

Takahiro Namazu, Kohei Ohtani, Shozo Inoue, Shugo Miyake

Publisher page

Abstract

Reactively bonded solder joints with Al/Ni exothermic films attract much attention in semiconductor and microelectromechanical systems (MEMS) industries. Higher bond strength of the joints is required for long-term mechanical reliability. We have investigated the strength of rectangular-solid single crystal silicon (SCS) specimens with reactively bonded Sn-3.5Ag solder joint by using specially developed four-point bending test equipment. In this paper, the influences of Al/Ni exothermic film thickness and metallic interlayer on the strength are discussed. The strength increases with increasing Al/Ni film thickness and pressure load during bonding. Metallic interlayer between the solder and SCS also affects the strength because fracture origin is dependent on the types of metals. The obtained results suggest that reacted NiAl is durable against external forces compared with the solder and interlayer.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Associate Professor Division of Mechanical Systems, Department of Mechanical and Systems Engineering, University of Hyogo, 2167 Shosha, Himeji, Hyogo 671-2201, Japan e-mail:

Division of Mechanical Systems, Department of Mechanical and Systems Engineering, University of Hyogo, 2167 Shosha, Himeji, Hyogo 671-2201, Japan

Kobelco Research Institute Inc., 1-5-5 Takatsukadai, Nishi-ku, Kobe, Hyogo 651-2271, Japan

References (24)

Show source-provided references
1. Joining of Stainless-Steel Specimens With Nanostructured Al/Ni Foils10.1063/1.1629390 ↗
2. Investigating the Effect of Applied Pressure on Reactive Multilayer Foil Joining10.1016/j.actamat.2004.07.012 ↗
3. Reactive Nanostructured Foil Used as a Heat Source for Joining Titanium10.1063/1.1769097 ↗
4. Localized Induction Heating Solder Bonding for Wafer Level MEMS Packaging10.1088/0960-1317/15/2/020 ↗
5. Production of Intermetallic Compounds From Ti/Al and Ni/Al Multilayer Thin Films—A Comparative Study10.1016/j.jallcom.2009.04.098 ↗
6. A Generalized Reduced Model of Uniform and Self-Propagating Reactions in Reactive Nanolaminates10.1016/j.combustflame.2013.03.016 ↗
7. Namazu, T., Takemoto, H., Fujita, H., Nagai, Y., and Inoue, S., 2006, “Self-Propagating Explosive Reactions in Nanostructured Al/Ni Multilayer Films as a Localized Heat Process Technique for MEMS,” 19th IEEE International Conference on Micro Electro Mechanical Systems (MEMS), Istanbul, Jan. 22–26, pp. 286–289.10.1109/memsys.2006.162779210.1109/MEMSYS.2006.1627792 ↗
8. Fujita, H., Namazu, T., and Inoue, S., 2007, “MEMS Hermetic Package With Lead-Free Solder Film Line Heated by Al/Ni Exothermic Structure,” 7th International Conference of Advanced Technology in Experimental Mechanics (ATEM 2007), Fukuoka, Japan, Sept. 12–14, Paper No. OS05-3-1.
9. Namazu, T., 2008, “Micro/Nano-Materials for MEMS Applications—Al/Ni Exothermic Reactive Film as a Heat Source for MEMS Packaging,” 16th Annual International Conference on Composites/Nano Engineering (ICCE-16), Kunming, China, July 20–26, pp. 507–510.
10. Ohtani, K., Yamano, Y., Namazu, T., and Inoue, S., 2009, “Strength Evaluation of Lead-Free-Solder Joint Fabricated by Exothermic Film Local Heating,” 15th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers'09), Denver, CO, June 21–25, pp. 172–175.10.1109/SENSOR.2009.528553710.1109/SENSOR.2009.5285537 ↗
11. Namazu, T., Ohtani, K., Yoshiki, K., and Inoue, S., 2011, “Crack Propagation Direction Control of Crack-Less Solder Bonding Using Al/Ni Flash Heating Technique,” 16th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers'11), Beijing, June 5–9, pp. 1368–1371.10.1109/TRANSDUCERS.2011.596952410.1109/TRANSDUCERS.2011.5969524 ↗
12. Namazu, T., Ohtani, K., Yoshiki, K., and Inoue, S., 2011,“Crack-Less Wafer-Level Packaging Using Flash Heating Technique for Micro Devices,” International Conference on Processing and Manufacturing of Advanced Materials (THERMEC), Quebec City, Canada, Aug. 1–5, pp. 1979–1983.10.4028/www.scientific.net/MSF.706-709.197910.4028/www.scientific.net/MSF.706-709.1979 ↗
13. Ito, S., Morikaku, T., Inoue, S., and Namazu, T., 2013, “Influence of Bonded Area Size on Cracking in Reactive Soldering With Al/Ni Multilayer Films,” 26th International Microprocesses and Nanotechnology Conference (MNC2013), Hokkaido, Japan, Nov. 5–8, Paper No. 8P-11-109.
14. Miyake, S., Kanetsuki, S., Morino, K., Kuroishi, J., and Namazu, T., 2014, “Thermal Resistance Analysis of Solder Joints Fabricated by Self-Propagating Exothermic Reaction,” 27th International Microprocesses and Nanotechnology Conference (MNC2014), Fukuoka, Japan, Nov. 4–7, Paper No. 6P-7-93.
15. Joints Obtained by Soldering, Adhesion, Autohesion and Fastening, Studied by Electrical Resistance Measurement10.1023/A:1017998922281 ↗
16. Effect of Under Bump Metallurgy and Reflows on Shear Strength and Microstructure of Joint between Cu Substrate and Sn–36Pb–2Ag Solder Alloy10.2320/matertrans.44.290 ↗
17. Measurement and Analysis of Adhesion Property of Lithium-Ion Battery Electrodes With SAICAS
18. Study on the Appearance and Peel Strength of Byakudan-Nuri Works
19. Influences of Film Composition and Annealing on the Mechanical and Electrical Properties of W-Mo Thin Films10.1007/s10853-011-6098-z ↗
20. Theoretical Analysis of the 4 Point Bending Test
21. Ito, S., Inoue, S., and Namazu, T., 2013, “The Size Limit of Al/Ni Multilayer Rectangular Cuboids for Generating Self-Propagating Exothermic Reaction on a Si Wafer,” 17th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers'17), Barcelona, June 16–20, pp. 1927–1930.10.1109/Transducers.2013.662717010.1109/Transducers.2013.6627170 ↗
22. Effect of Ni Layer Thickness and Soldering Time on Intermetallic Compound Formation at the Interface Between Molten Sn-3.5Ag and Ni/Cu Substrate10.1007/s11664-999-0164-1 ↗
23. Effect of Dissolution on the Ni3Sn4 Growth Kinetics at the Interface of Ni and Liquid Sn-Base Solders10.4028/www.scientific.net/SSP.138.153 ↗
24. Interfacial Reactions Between In–48Sn Solder and Electroless Nickel/Immersion Gold Substrate During Reflow Process10.1002/sia.2193 ↗