Numerical Study of Impact Penetration Shearing Employing Finite Strain Viscoplasticity Model Incorporating Adiabatic Shear Banding
Source abstract
Abstract
This work brings forward a twofold contribution relevant to the adiabatic shear banding (ASB) process as a part of dynamic plasticity of high-strength metallic materials. The first contribution is a reassessment of a three-dimensional finite deformation model starting from a specific scale postulate and devoted to cover a wide range of dissipative phenomena, including ASB-related material instabilities (strong softening prefailure stage). The model, particularly destined to deal with impacted structures was first detailed by (Longère et al. 2003, “Modelling Adiabatic Shear Banding Via Damage Mechanics Approach,” Arch. Mech., 55, pp. 3–38; 2005, “Adiabatic Shear Banding Induced Degradation in a Thermo-Elastic/Viscoplastic Material Under Dynamic Loading,” Int. J. Impact Eng., 32, pp. 285–320). The second novel contribution concerns numerical solution of a genuine ballistic penetration problem employing the above model for a target plate material. The ASB trajectories are shown to follow a multistage history and complex distribution pattern leading finally to plugging failure mechanism. The corresponding analysis and related parametric study are intended to put to the test the pertinency of the model as an advanced predictive tool for complex shock related problems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Energetic Materials and Combustion · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Université Européenne de Bretagne, LIMATB-UBS (EA4250), 56321 Lorient Cedex, France
Laboratoire de Mécanique et de Physique des Matériaux, ENSMA, UMR CNRS 6617, 86961 Futuroscope-Chasseneuil Cedex, France
Nexter Systems, 18023 Bourges Cedex, France
References (38)
Show source-provided references
1. Adiabatic Shear Banding in High Speed Machining of Ti–6Al–4V: Experiments and Modeling10.1016/S0749-6419(01)00003-1 ↗
2. On Repeated Adiabatic Shear Band Formation During High Speed Machining10.1016/S0749-6419(01)00006-7 ↗
3. Adiabatic Shear Bands in the Taylor Impact Test for a WHA Rod10.1016/S0749-6419(98)00026-6 ↗
4. Dynamic Deformation and Adiabatic Shear Microstructures Associated With Ballistic Plug Formation and Fracture in Ti–6Al–4V Targets
5. Thermo-Plastic Instability in Simple Shear10.1016/0022-5096(82)90029-1 ↗
6. On Critical Conditions for Shear Band Formation at High Strain Rates10.1016/0036-9748(84)90418-6 ↗
7. Instabilité thermoviscoplastique en cisaillement simple
8. Collective Behavior and Spacing of Adiabatic Shear Bands10.1016/S0022-5096(97)00012-4 ↗
9. Some Results and New Experimental Technique in Studies of Adiabatic Shear Bands
10. Influence of Anisotropic Effects on the Micro-Damage Process in Dissipative Solids
11. Localized Fracture in Inelastic Polycrystalline Solids Under Dynamic Loading Processes10.1177/105678959700600402 ↗
12. An Experimental Study of the Formation Process of Adiabatic Shear Bands in a Structural Steel10.1016/0022-5096(88)90012-9 ↗
13. Adiabatic Shear Bands in a Ti–6Al–4V Titanium Alloy10.1016/S0022-5096(98)00044-1 ↗
14. Effect of Strain Rate Upon Plastic Flow of Steel10.1063/1.1707363 ↗
15. Catastrophic Thermoplastic Shear
16. Macroscopic Effects of Micro-Shear Banding in Plasticity of Metals10.1007/BF01177225 ↗
17. Couque, H. , 2003, “Essais chapeau hydrodynamique d’un acier,” GIAT Industries, Technical Note DSAM/DT/MCP/3050.13.03C.
18. Modelling Adiabatic Shear Banding Via Damage Mechanics Approach
19. Adiabatic Shear Banding Induced Degradation in a Thermo-Elastic/Viscoplastic Material Under Dynamic Loading10.1016/j.ijimpeng.2005.03.002 ↗
20. Non-Local Coupling of Viscoplasticity and Anisotropic Viscodamage for Impact Problems Using the Gradient Theory
21. Thermodynamics With Internal State Variables10.1063/1.1711937 ↗
22. Processes in Simple Thermodynamic Materials10.1007/BF00248155 ↗
23. L’interprétation physique de la thermodynamique rationnelle
24. Some Issues About Anisotropic Elastic-Plastic Models at Finite Strain10.1016/S0020-7683(01)00139-1 ↗
25. Adiabatic Heat Evaluation for Dynamic Plastic Localization
26. Adiabatic Shear Banding in Plane Strain Tensile Deformations of 11 Thermoelastoviscoplastic Materials With Finite Thermal Wave Speed10.1016/j.ijplas.2004.07.004 ↗
27. Stability and Error Analysis for Time Integrators Applied to Strain-Softening Materials10.1016/0045-7825(95)00786-Z ↗
28. A Damage Model With Delay Effect. Analytical and Numerical Studies of the Evolution of the Characteristic Damage Length10.1016/S0020-7683(03)00153-7 ↗
29. A Hydrodynamic Hat Specimen to Investigate Pressure and Strain Rate Dependence on Adiabatic Shear Band Formation10.1051/jp4:20020730 ↗
30. An Experimental and Numerical Study of the Localization Behavior of Tantalum and Stainless Steel10.1016/j.ijplas.2005.10.002 ↗
31. Ballistic Impact Damage of S 2-Glass-Reinforced Plastic Structural Armor10.1016/S0266-3538(98)00029-3 ↗
32. Investigation of High-Velocity Impact on Integral Armor Using Finite Element Method10.1016/S0734-743X(99)00047-0 ↗
33. The Mechanics of Penetration of Projectiles Into Targets10.1016/0020-7225(78)90002-2 ↗
34. Material Failure At High Strain Rates
35. A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures
36. Numerical Simulation of Plugging Failure in Ballistic Penetration10.1016/S0020-7683(00)00343-7 ↗
37. Adaptive Lagrangian Modelling of Ballistic Penetration of Metallic Targets10.1016/S0045-7825(96)01134-6 ↗
38. Self-Organization in the Initiation of Adiabatic Shear Bands10.1016/S1359-6454(97)00151-1 ↗