Displacement and Stress Fields in a Functionally Graded Fiber-Reinforced Rotating Disk With Nonuniform Thickness and Variable Angular Velocity
Source abstract
Abstract
Displacement and stress fields in a functionally graded (FG) fiber-reinforced rotating disk of nonuniform thickness subjected to angular deceleration are obtained. The disk has a central hole, which is assumed to be mounted on a rotating shaft. Unidirectional fibers are considered to be circumferentially distributed within the disk with a variable volume fraction along the radius. The governing equations for displacement and stress fields are derived and solved using finite difference method. The results show that for disks with fiber rich at the outer radius, the displacement field is lower in radial direction but higher in circumferential direction compared to the disk with the fiber rich at the inner radius. The circumferential stress value at the outer radius is substantially higher for disk with fiber rich at the outer radius compared to the disk with the fiber rich at the inner radius. It is also observed a considerable amount of compressive stress developed in the radial direction in a region close to the outer radius. These compressive stresses may prevent any crack growth in the circumferential direction of such disks. For disks with fiber rich at the inner radius, the presence of fibers results in minimal changes in the displacement and stress fields when compared to a homogenous disk made from the matrix material. In addition, we concluded that disk deceleration has no effect on the radial and hoop stresses. However, deceleration will affect the shear stress. Tsai–Wu failure criterion is evaluated for decelerating disks. For disks with fiber rich at the inner radius, the failure is initiated between inner and outer radii. However, for disks with fiber rich at the outer radius, the failure location depends on the fiber distribution.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Composite Structure Analysis and Optimization · Vibration and Dynamic Analysis · Railway Engineering and Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Industrial Engineering, Northeastern University, Boston, MA 02115
Department of Mechanical and Industrial Engineering, Northeastern University, Boston, MA 02115 e-mail:
Funding
Qatar National Research Fund
References (36)
Show source-provided references
1. 1998
2. 1999
3. Impact Resistance and Energy Absorption of Regular and Functionally Graded Hexagonal Honeycombs With Cell Wall Material Strain Hardening10.1016/j.ijmecsci.2014.10.012 ↗
4. Dynamic Crushing and Energy Absorption of Regular, Irregular and Functionally Graded Cellular Structures10.1016/j.ijsolstr.2010.10.018 ↗
5. Functionally Graded Material Properties for Disks and Rotors10.4028/www.scientific.net/KEM.127-131.1199 ↗
6. Stress Analysis of Functionally Graded Rotating Discs: Analytical and Numerical Solutions10.1007/s10409-011-0499-8 ↗
7. Investigation of Mechanical Behavior for a Rotating FGM Circular Disk With a Variable Angular Speed10.1007/s12206-015-0824-4 ↗
8. Analysis of Functionally Graded Rotating Disks With Variable Thickness10.1016/j.mechrescom.2008.02.007 ↗
9. Thermoelastic Solution of a Functionally Graded Variable Thickness Rotating Disk With Bending Based on the First-Order Shear Deformation Theory10.1016/j.tws.2008.10.002 ↗
10. Temperature and Thickness Effects on Thermal and Mechanical Stresses of Rotating FG-Disks10.1007/s12206-011-0110-z ↗
11. Thermo-Mechanical Analysis of Rotating Disks With Non-Uniform Thickness and Material Properties10.1016/j.ijpvp.2012.07.010 ↗
12. Finite Element Analysis of Thermoelastic Field in a Rotating FGM Circular Disk10.1016/j.apm.2010.02.022 ↗
13. Analysis of Thermoelastic Characteristics of a Rotating FGM Circular Disk by Finite Element Method10.1163/092430410X490473 ↗
14. Transverse Vibration and Stability of a Functionally Graded Rotating Annular Disk With a Circumferential Crack10.1016/j.ijmecsci.2016.03.004 ↗
15. Flexible Disk Rotating on a Gas Film Next to a Wall10.1115/1.3629717 ↗
16. Stationary Waves in Thin Spinning Disks10.1016/0020-7403(67)90023-9 ↗
17. An Analytical Study on the Effect of Rigid Body Translational Degree of Freedom on the Vibration Characteristics of Elastically Constrained Rotating Disks10.1016/j.ijmecsci.2010.05.004 ↗
18. Critical Speeds for a Flexible Spinning Disk10.1016/0020-7403(87)90024-5 ↗
19. The Stress Response of Functionally Graded Isotropic Linearly Elastic Rotating Disks10.1023/A:1007644331856 ↗
20. A Three-Dimensional Elasticity Solution for Functionally Graded Rotating Disks10.1016/j.compstruct.2009.09.055 ↗
21. Non-Linear Bending Analysis of Shear Deformable Functionally Graded Rotating Disk10.1016/j.ijnonlinmec.2013.08.007 ↗
22. Elastic Stresses in Rotating Anisotropic Disks10.1016/0020-7403(69)90052-6 ↗
23. Elastic Analysis of Rotating Functionally Graded Polar Orthotropic Disks10.1016/j.ijmecsci.2012.04.014 ↗
24. Elastic Stresses in Anisotropic Disks of Variable Thickness10.1016/0020-7403(70)90093-7 ↗
25. Elastic Stresses in a Rotating Anisotropic Annular Disk of Variable Thickness and Variable Density10.1016/0020-7403(74)90078-2 ↗
26. Deformation and Stress Analysis of Circumferentially Fiber-Reinforced Composite Disks10.1016/j.ijsolstr.2004.09.041 ↗
27. Deformation and Stress Analysis of an Anisotropic Rotating Annular Disk
28. Thermo-Elastic Stress Analysis in a Thermoplastic Composite Disc10.1515/SECM.2005.12.4.251 ↗
29. Zheng, Y., 2016, “Displacement and Stress Fields in Functionally Graded Rotating Composite Disk Under Deceleration With Variable Thickness,” Master thesis, Northeastern University, Boston, MA.
30. Analytical and Numerical Validation of Epoxy/Glass Structural Composites for Elastic Models10.5923/c.materials.201502.32 ↗
31. 2013
32. 1980
33. 1999
34. Mechanical Properties of Biomimetic Leaf Composite10.1115/IMECE2016-65503 ↗
35. 2010
36. Simmons: Excellence in Epoxy Resin Worksurfaces