Yield and Deformation in Biaxially Stressed Multilayer Metallic Thin Films
Source abstract
Abstract
Multilayer thin films of CuNb, CuNi, and CuNbNi with 20 nm individual layer thicknesses were fabricated by magnetron sputtering on oxide coated silicon wafers. The mechanical properties of the films were measured using bulge testing and nanoindentation. Elastic and plastic properties were determined for freestanding films in both square and rectangular window geometries. A finite element model of the window was used to determine the yielding behavior to account for stress concentrations in the membranes. The initial yield in a pressurized membrane, on the order of 400–500 MPa, is approximately one-half of the flow stress inferred from nanoindentation hardness results between 1.9 GPa and 3.4 GPa, and is a result of microscale yielding prior to uniform deformation in these high strength systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical and Materials Engineering, Washington State University, Pullman WA 99164-2920
References (28)
Show source-provided references
1. Deformation Behavior of Nanostructured Metallic Multilayers10.1002/1527-2648(200104)3:4<217::AID-ADEM217>3.0.CO;2-5 ↗
2. Fatigue Properties of Nanoscale Cu/Nb Multilayers10.1016/j.scriptamat.2006.01.027 ↗
3. Work Hardening in Rolled Nanolayered Metallic Composites10.1016/j.actamat.2004.09.018 ↗
4. Nanostructured Cu/Nb Multilayers Subjected to Helium-Ion Irradiation10.1016/j.nimb.2007.03.098 ↗
5. Comparison of Tensile and Bulge Tests for Thin Film Silicon Nitride10.1007/BF02427976 ↗
6. Tensile Behavior of 40 nm Cu/Nb Nanoscale Multilayers10.1016/j.scriptamat.2008.01.005 ↗
7. Two Interferrometric Methods for the Mechanical Characterization of Thin Films by Bulge Tests10.1557/JMR.1997.0299 ↗
8. A New Bulge Test for the Determination of Young’s Modulus and Poisson’s Ratio of Thin Films10.1557/JMR.1992.3242 ↗
9. The Elastic Biaxial Modulus of Ag-Pd Multilayered Thin Films Measured Using the Bulge Test10.1557/JMR.1994.0025 ↗
10. A Novel Bulge Test Setup for Rectangular Free Standing Thin Films10.1063/1.1150029 ↗
11. Plane Strain Bulge Test for Nanocrystalline Copper Thin Films10.1016/j.scriptamat.2007.05.012 ↗
12. Mechanical Testing of Thin Films and Small Structures10.1002/1527-2648(200103)3:3<99::AID-ADEM99>3.0.CO;2-2 ↗
13. Coupling Bulge Testing and Nanoindentation to Characterize Materials Properties of Bulk Micromachined Structures10.1007/s00542-004-0439-7 ↗
14. Plane Strain Bulge Test for Thin Films10.1557/jmr.2005.0313 ↗
15. Length Scale Deformation Mechanisms in Incoherent Metallic Multilayered Composites10.1016/j.actamat.2005.06.025 ↗
16. In Situ TEM Observations of Fracture in Nanolaminated Metallic Thin Films10.1023/A:1024967510917 ↗
17. Hohlfelder, R. J. , 1999, “Bulge and Blister Testing of Thin Films and Their Interfaces,” Ph.D. thesis, Stanford University, Stanford, CA.
18. Mechanical Property Measurements of Thin Films Using Load Deflection of Composite Rectangular Membranes
19. Measurement of Hardness and Elastic Modulus by Instrumented Indentation: Advances in Understanding and Refinements to Methodology10.1557/jmr.2004.19.1.3 ↗
20. The Influence of Oxide and Adsorbates on the Nanomechanical Response of Silicon Surfaces10.1557/JMR.2000.0081 ↗
21. Comparison of Bulge Test and Point Deflection Methods for the Mechanical Characterization of Submicron Thick Composite Membranes
22. Examination of Bulge Test for Determining Residual Stress Young’s Modulus and Poisson’s Ratio of 3C-SiC Thin Films10.1061/(ASCE)0893-1321(2003)16:2(46) ↗
23. Techniques in Residual Stress Measurement for MEMS and Their Applications
24. Effects of Deflection on Bulge Test Measurements of Enhanced Modulus in Multilayered Films10.1016/S0040-6090(96)09031-1 ↗
25. Tabor10.1093/oso/9780198507765.001.0001 ↗
26. The Localization of Plastic Flow Under Dynamic Indentation Conditions: I. Experimental Results10.1016/j.actamat.2005.09.022 ↗
27. Hertzberg
28. A MEMS-Based Evaluation of the Mechanical Properties of Metallic Thin Films10.1109/JMEMS.2007.892912 ↗