journal article·1999-04-01

The Effect of Tungsten on the Mechanical Properties of Tantalum

C. L. Briant, D. H. Lassila

Publisher page

Abstract

This paper reports a study of the mechanical behavior of Ta-W alloys. The results show that tungsten additions increase the yield strength and the rate of work hardening of tantalum. These additions also cause a change in the deformed microstructure from one that is primarily cellular to one that consists mostly of dislocation tangles. It is proposed that the increase in yield strength arises from solid solution hardening and that the increase in the work hardening can be correlated with an increase in the density and arrangement of dislocations present in the material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Engineering, Brown University, Providence, RI 02912

Lawrence Livermore National Laboratory, Livermore, CA 94550

References (17)

Show source-provided references
1. Arsenault, R. J. and Lawley, A., 1968, Work Hardening, ed. J.P. Hirth and J. Weertman, Gordon and Breech, New York, p. 283.
2. Barbee Troy W. , and HugginsRobert A., 1965, J. Less Common Metals, Vol. 8, pp. 306–319.10.1016/0022-5088(65)90065-2 ↗
3. Briant, C. L., Kaspar, R. B., and Lassila, D. H., 1996, Tantalum, ed. E. Chen, A. Crowson, E. Lavernia, W. Ebihara, and P. Kumar, TMS Publications, Warrendale, pp. 191–201.
4. Chen Shuh Rong , and GrayG. T., 1996, Metall. Trans. A, Vol. 27A, pp. 2994–3006.10.1007/BF02663849 ↗
5. Duprey, K. and Clifton, R. J., 1996, Tantalum, ed. E. Chen, A. Crowson, E. Lavernia, W. Ebihara, and P. Kumar, TMS Publications, Warrendale, pp. 163–172.
6. Ghoneim N. M. , and AmodeaR., 1988, Sol. State Phenom., Vol. 3 & 4, p. 377377.
7. Gray, G. T., III, Bingert, S. R., Wright, S. I., and Chen, S. R., 1994, MRS. Symp., Vol. 322, p. 207.10.1557/PROC-322-407 ↗
8. Hoge K. G. and MukerjeeA. K., 1977, J. Matls. Science, Vol. 12, pp. 1666–1672.10.1007/BF00542818 ↗
9. Hughes, D. A., 1994, Evolution in Refractory Metals and Alloys, E. D. C. Dalder, T. Grobstein, and C. S. Olsen, TMS Publications, Warrendale, p. 219.
10. Hull D. , MclvorI. D., and OwenW. S., 1962, J. Less Common Metals, Vol. 4, p. 409409.10.1016/0022-5088(62)90025-5 ↗
11. Lassila, D. H., LeBlanc, M. M., and Meyers, M. M., 1996, Tantalum, ed. E. Chen, A. Crowson, E. Lavernia, W. Ebihara, and P. Kumar, TMS Publications, Warrendale, pp. 185–190.
12. Mordike B. L. , RogauschK. D., and BraithwaiteA. A., 1970, Metals Science, Vol. 4, pp. 37–40.10.1179/msc.1970.4.1.37 ↗
13. Murr, L. E., Pappu, S., Kennedy, C., Niou, C.-S., and Meyers, M. A., 1996, Tantalum, ed. E. Chen, A. Crowson, E. Lavernia, W. Ebihara, and P. Kumar, TMS Publications, Warrendale, pp. 145–156.
14. Pappu S. , KennedyC., MurrL. E., and MeyersM. A., 1966, Scripta Materialia, Vol. 35, pp. 959–965.10.1016/1359-6462(96)00248-5 ↗
15. Schwartz, A., Lassila, D. H., LeBlanc, M. M., 1998, Materials Sci. Eng., to be published.
16. Tang M. , KubinL. P., and CanovaG. R., 1998, Acta Mater., Vol. 46, p. 32213221.10.1016/S1359-6454(98)00224-9 ↗
17. Wasserbach B. W. , 1986, Phil. Mag. A, Vol. 53, pp. 335–356.10.1080/01418618608242836 ↗