journal article·2011-04-01

A Simple Transversely Isotropic Hyperelastic Constitutive Model Suitable for Finite Element Analysis of Fiber Reinforced Elastomers

Leslee W. Brown, Lorenzo M. Smith

Publisher page

Abstract

A transversely isotropic fiber reinforced elastomer’s hyperelasticity is characterized using a series of constitutive tests (uniaxial tension, uniaxial compression, simple shear, and constrained compression test). A suitable transversely isotropic hyperelastic invariant based strain energy function is proposed and methods for determining the material coefficients are shown. This material model is implemented in a finite element analysis by creating a user subroutine for a commercial finite element code and then used to analyze the material tests. A useful set of constitutive material data for multiple modes of deformation is given. The proposed strain energy function fits the experimental data reasonably well over the strain region of interest. Finite element analysis of the material tests reveals further insight into the materials constitutive nature. The proposed strain energy function is suitable for finite element use by the practicing engineer for small to moderate strains. The necessary material coefficients can be determined from a few simple laboratory tests.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Elasticity and Material Modeling · Composite Structure Analysis and Optimization · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mem. ASME

Gates Corporation, 2975 Waterview Drive, Rochester Hills, MI 48309

Department of Mechanical Engineering, Oakland University, 118 Dodge Hall, Rochester, MI 48309

References (40)

Show source-provided references
1. Rogers, J. W. , 1981, “The Use of Fibers in V-Belt Compounds,” Rubber World (March), pp. 27–31.
2. Stress-Strain Data for Vulcanised Rubber Under Various Types of Deformation10.1039/tf9444000059 ↗
3. Comparison of Hyperelastic Models for Rubber-Like Materials10.5254/1.3547969 ↗
5. Material Law Selection in the Finite Element Simulation of Rubber-Like Materials and Its Practical Application in the Industrial Design Process
6. Development of Material Constants for Nonlinear Finite-Element Analysis10.5254/1.3536224 ↗
7. A Review of Methods to Characterize Rubber Elastic Behavior for Use in Finite Element Analysis10.5254/1.3538686 ↗
8. Some Considerations on Mechanical Testing Methods of Rubber Materials Using Nonlinear Finite Element Analysis10.1002/pi.1379 ↗
9. Similarities Between Soft Biological Tissues and Rubberlike Materials
10. Elastic Moduli of Breast and Prostate Tissues Under Compression10.1177/016173469802000403 ↗
12. The Mechanical Properties and Fractural Morphology of Unidirectional Short-Fiber Reinforced Polychloroprene Composites
13. Directional Model for Isotropic and Anisotropic Hyperelastic Rubber-Like Materials10.1016/S0167-6636(03)00025-5 ↗
14. van der Pol, J. F. , 1994, “Short Para Aramid Fiber Reinforcement,” Rubber World (June), pp. 32–37.
15. Foldi, A. P. , 1987, “Reinforcement of Rubber Compounds With Short, Individual Fibers,” Rubber World (May), pp. 19–26.
16. New Composites Based on Short Melamine Fiber Reinforced EPDM Rubber10.1002/pc.10458 ↗
17. Numerical Simulation for Fiber Reinforced Rubber10.1299/jcst.2.587 ↗
18. A Theory of Large Elastic Deformation10.1063/1.1712836 ↗
19. Holzapfel
20. Measurement of Elastomer’s Bulk Modulus by Means of a Confined Compression Test10.5254/1.3538718 ↗
21. MARC Analysis Research Corporation
22. Large Elastic Deformations of Homogeneous Anisotropic Materials
23. Spencer
25. Short Fiber Reinforcement of Elastomers10.5254/1.3540483 ↗
26. A Class of Orthotropic and Transversely Isotropic Hyperelastic Constitutive Models Based on a Polyconvex Strain Energy Function10.1016/j.ijsolstr.2004.02.027 ↗
27. Constitutive Modelling of Calendaring Induced Anisotropy in Rubber Sheets
28. Transversely Isotropic Strain Energy With Physical Invariants
29. Ogden
30. Fung
31. Elasticity
32. An Anisotropic Hyperelastic Constitutive Model With Fiber Matrix Shear Interaction for the Human Annulus Fibrosis10.1115/1.2069987 ↗
33. Finite Element Implementation of Incompressible, Transversely Isotropic Hyperelasticity10.1016/0045-7825(96)01035-3 ↗
34. MSC Software, 2008, MARC, Vol. D, “User Subroutines and Special Routines.”
35. Loss of Ellipticity in Plane Deformation of a Simple Directionally Reinforced Incompressible Nonlinearly Elastic Solid10.1023/A:1007441804480 ↗
36. Constitutive Equations for Fiber Reinforced Hyperelasticity
37. Study on Constitutive Model and Failure Criterion of Cord-Rubber Composite10.1177/0095244304042987 ↗
38. Muscle Performance in a Soft-Bodied Terrestrial Crawler: Constitutive Modeling of Strain-Rate Dependency10.1098/rsif.2007.1076 ↗
39. An Anisotropic Pseudo-Elastic Approach for Modeling Mullins Effect in Fibrous Biological Materials10.1016/j.mechrescom.2009.05.006 ↗
40. A Theory of Stress Softening of Elastomers Based on Finite Chain Extensibility10.1098/rspa.2003.1248 ↗