journal article·2016-10-01

Effects of Silicon Content on the Microstructure and Mechanical Properties of Cobalt-Based Tribaloy Alloys

Rong Liu, Jianhua Yao, Qunli Zhang, Matthew X. Yao, Rachel Collier

Publisher page

Abstract

Cobalt-based Tribaloy alloys are strengthened mainly by a hard, intermetallic Laves phase consisting of Co3Mo2Si or/and CoMoSi; therefore, silicon content plays a large role in the microstructure and performance of these materials. In this research, the microstructures of two cobalt-based Tribaloy alloys that are largely different in Si content are studied using scanning electron microscopy (SEM) with an EDAX energy dispersive X-ray (EDX) spectroscopy, and X-ray diffraction (XRD), fatigue strength under rotating-bending test, mechanical behavior under nanoindentation, and hardness at room and elevated temperatures using a microindentation tester. It is revealed that with higher silicon content (2.6 wt. %), T-400 has a hypereutectic microstructure with Laves phase as primary phase, whereas with lower silicon content (1.2 wt. %), T-401 has a hypoeutectic microstructure with solid solution as primary phase. T-400, containing lager volume fraction of Laves phase, exhibits better fatigue strength, in particular, at high stresses, while T-401, with less volume fraction of Laves phase, has improved ductility, exhibiting better resistance to fatigue at low stresses. The hardness of both alloys decreases with temperature, and T-401 shows higher reduction rate. T-400 is harder than T-401.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Aerospace Engineering, Carleton University, 1125 Colonel By Drive, Ottawa, ON K1S 5B6, Canada;

Research Center of Laser Processing Technology and Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang 310014, China e-mail:

Research Center of Laser Processing Technology and Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang 310014, China

Kennametal Stellite, Inc., 471 Dundas Street East, Belleville, ON K8N 5C4, Canada

References (20)

Show source-provided references
1. 2000 · 362
2. Recent Developments in Wear- and Corrosion-Resistant Alloys for the Oil Industry
3. The Fracture Behavior of Two Co–Mo–Cr–Si Wear Resistant Alloys10.1007/BF01026320 ↗
4. Tribaloy Intermetallic Materials: New Wear- and Corrosion-Resistant Alloys10.1108/eb010165 ↗
5. Oxidation Behavior of Tribaloy T-800 Alloy at 800 and 1000 °C10.1007/s11085-008-9117-y ↗
6. Tribaloy Intermetallic Alloy Compositions: New Materials or Additives for Wear Resistant Applications
7. Structure and Hardness of Co–Mo–Cr–Si Wear Resistant Alloys (Tribaloys)10.1179/030634584790253146 ↗
8. Effect of Iron Additions on the Microstructure and Properties of the ‘Tribaloy’ Co–Mo–Cr–Si Wear Resistant Alloys10.1007/BF00555273 ↗
9. HVOF-Sprayed Tribaloy-400: Microstructure and First Principle Calculations10.1016/j.matlet.2004.02.025 ↗
10. Tuominen, J., Vuoristo, P., and Tapio, M., 2004, “Microstructure and Dry Sliding Wear Properties of Laser Clad Tribaloy Coatings,” 1st Pacific International Conference on Applications of Lasers and Optics, Melbourne, Australia, Apr. 19–21, pp. 13–17.10.2351/1.5056118 ↗
11. Salt Fog Corrosion Behavior of High-Velocity Oxygen-Fuel Thermal Spray Coatings Compared to Electrodeposited Hard Chromium10.1016/S0257-8972(00)00671-X ↗
12. Sliding Wear Performance of Cobalt-Based Alloys in Molten-Al-Added Zinc Bath10.1016/S0043-1648(97)00092-6 ↗
13. Laser Cladding and Erosive Wear of Co–Mo–Cr–Si Coatings10.1016/S0257-8972(99)00563-0 ↗
14. High Temperature Wear and Corrosion Resistance of a Newly Developed Laves Phase Strengthened Co–Mo–Cr–Si Alloy10.1016/j.msea.2006.07.054 ↗
15. Mechanical and Tribological Properties of Newly Developed Tribaloy Alloys10.1016/j.msea.2006.10.088 ↗
16. An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments10.1557/JMR.1992.1564 ↗
17. Relationships Between Hardness, Young's Modulus and Elastic Recovery in Hard Nanocomposite Coatings10.1016/S0257-8972(01)01714-5 ↗
18. 2001 · 59
19. Microstructural Characteristics and Corrosion Resistance in Molten Zn–Al Bath of Co–Mo–Cr–Si Alloys10.1016/j.msea.2005.07.054 ↗
20. A Newly Developed Tribaloy Alloy With Increased Ductility10.1016/j.scriptamat.2005.08.033 ↗