Effect of Shot Peening Process on the Fatigue Life of Shot Peened Low Alloy Steel
Source abstract
Abstract
Shot peening is well known as a surface deformation process which can induce compressive residual stresses into the subsurface of materials in order to improve the fatigue life. In this paper, the effects of the process conditions for both single and double shot peening on the fatigue life of AISI 4340 low alloy steel is investigated. The fatigue tests revealed that the shot peening process could significantly enhance the fatigue life of the treated components. However, a side effect of the process was an increase in surface roughness which was more prevalent under higher peening pressures and led to a reduction in the fatigue life. Therefore, to maximize the performance of the process, the peening parameters need to be carefully selected. Microstructure analysis of the shot peened parts indicated that the nucleation cracks or initiation cracks occurred in the subsurface at depths of 10–20 μm in the case of as-received samples but moved up to the free surface for the shot peened parts.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Sustainable Developments in Civil Engineering Research Group, Faculty of Civil Engineering, Ton Duc Thang University, Room E001, 19 Nguyen Huu Tho Street, Tan Phong Ward, District 7, Ho Chi Minh City 756636, Vietnam e-mail:
School of Mechanical and Aerospace Engineering, Nanyang Technological University, N3.1-B2-01, 50 Nanyang Avenue, 639798, Singapore e-mail:
School of Mechanical and Aerospace Engineering, Nanyang Technological University, N3.2-01-19, 50 Nanyang Avenue, 639798, Singapore e-mail:
References (15)
Show source-provided references
1. 2014
2. Review of Shot Peening Processes to Obtain Nanocrystalline Surfaces in Metal Alloys10.1179/026708408X334087 ↗
3. 2009
4. The Effect of Nitriding, Severe Shot Peening and Their Combination on the Fatigue Behavior and Micro-Structure of a Low-Alloy Steel10.1016/j.ijfatigue.2013.04.017 ↗
5. Improvement in the Fatigue Strength of Chromium Electroplated AISI 4340 Steel by Shot Peening10.1111/j.1460-2695.2008.01314.x ↗
6. Fatigue Behavior of a Low-Alloy Steel With Nanostructured Surface Obtained by Severe Shot Peening10.1016/j.engfracmech.2011.06.011 ↗
7. Fatigue Behavior of X70 Microalloyed Steel After Severe Shot Peening10.1016/j.ijfatigue.2013.04.021 ↗
8. Effects of Shot Peening Pressure, Media Type and Double Shot Peening on the Microstructure, Mechanical and Tribological Properties of Low-Alloy Steel10.1088/2051-672X/4/4/045001 ↗
9. Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials10.1520/E0466-07 ↗
10. Geometrical Product Specifications (GPS)––Surface Texture: Areal––Part 2: Terms, Definitions and Surface Texture Parameters
11. Mechanical and Tribological Properties of Shot-Peened SAE 1070 Steel10.1080/10402004.2015.1121313 ↗
12. Effect of Coverage and Double Peening Treatments on the Fatigue Life of a Quenched and Tempered Structural Steel10.1016/j.surfcoat.2014.03.051 ↗
13. New Approach to Estimate Coverage Parameter in 3D FEM Shot Peening Simulation10.1080/02670844.2016.1274536 ↗
14. 2013
15. 2010