journal article·2018-04-01

Hot Deformation Behavior of Four Steels: A Comparative Study

C. Menapace, N. Sartori, M. Pellizzari, G. Straffelini

Publisher page

Abstract

The hot deformation behavior of four different steels in the as-cast condition was investigated by means of hot compression tests conducted at temperatures ranging from 1100 °C up to 1200 °C, and at strain rates in between 0.12 and 2.4 s−1. The primary focus of this work was to check the possibility to increase the strain rate during the rough preliminary working of the ingots, i.e., to adopt a rough rolling process in place of the more conventional rough forging. The second aim of the research was to study the influence of the different characteristics of these steels in their as-cast conditions on their hot deformation behavior. It was seen that in all deformation conditions, the stress–strain compression curves show a single peak, indicating the occurrence of dynamic recrystallization (DRX). The hot deformation behavior was studied in both the condition of dynamic recovery (DRV), modeling the stress–strain curves in the initial stage of deformation, and DRX. Data of modeling were satisfactorily employed to estimate the flow stress under different conditions of temperature and strain rate. The experimental values of the activation energy for hot deformation, QHW, were determined and correlated to the chemical composition of the steels; a power law curve was found to describe the relation of QHW and the total amount of substitutional elements of the steels. The critical strain for DRX, εc, was determined as a function of the Zener–Hollomon parameter and correlated to the peak strain, εp. A ratio εc/εp in the range 0.45–0.65 was found, which is in agreement with literature data. All this information is crucial for a correct design of the rough deformation process of the produced ingots.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Industrial Engineering, University of Trento, via Sommarive 9, Trento 38123, Italy e-mail:

Department of Industrial Engineering, University of Trento, via Sommarive 9, Trento 38123, Italy

References (50)

Show source-provided references
1. 2003
2. Prediction of Steel Flow Stresses Under Hot Working Condition10.1590/S1516-14392005000300015 ↗
3. 1968 · 60
4. A Simple Constitutive Model for Prediction of Single-Peak Flow Curves Under Hot Working Conditions10.1115/1.4032153 ↗
5. A Critical Review of Experimental Result and Constitutive Description for Metals and Alloys in Hot Working10.1016/j.matdes.2010.11.048 ↗
6. Prediction of Steel Flow Stresses at High Temperatures and Strain Rates10.1007/BF02667368 ↗
7. A One Parameter Approach to Determining the Critical Conditions for the Initiation of Dynamic Recrystallization10.1016/1359-6454(95)00146-7 ↗
8. Modelling Microstructural Development During Hot Rolling10.1179/mst.1990.6.11.1072 ↗
9. Sellars · 1980
10. Recrystallization and Grain Growth in Hot Rolling10.1179/msc.1979.13.3-4.187 ↗
11. Microstructure as a Criterion for the Selection of Hot Working Process Parameters for Plain Medium Carbon Steel10.1115/1.2903192 ↗
12. Constitutive Analysis in Hot Working10.1016/S0921-5093(01)01117-0 ↗
13. On the Mechanism of Hot Deformation10.1016/0001-6160(66)90207-0 ↗
14. 1995
15. Development of Dynamic Recrystallization Theory10.1016/j.msea.2004.01.064 ↗
16. Prediction of Hot Deformation Behavior of 10Cr-10Ni-5Mo-2Cu Steel10.1016/j.matlet.2006.09.050 ↗
17. Effect of Composition and Initial Grain Size on the Dynamic Recrystallization of Austenite in Plain Carbon Steels10.1007/BF02646835 ↗
18. Effect of Carbon Content on the Plastic Flow of Plain Carbon Steels at Elevated Temperatures10.1007/BF02642423 ↗
19. Jonas · 1993 · 41
20. Empirical Formula of Flow Stress of Carbon Steels: Resistance to Deformation of Carbon Steels at Elevated Temperature
21. Dixon, T. J., Sellars, C. M., and Whiteman, J. A., 1996, “The Effect of Carbon Content During Hot Deformation of Austenite,” 37th Mechanical Working and Steel Processing Conference, Hamilton, ON, Canada, Oct. 22–25, pp. 705–710.
22. Jaipal, J., Davies, C. H. J., Wynne, B. P., Collinson, D. C., Brownrigg, A., and Hodgson, P. D., 1997, “Effect of Carbon Content on the Hot Flow Stress and Dynamic Recrystallisation Behaviour of Plain Carbon Steels,” International Conference on Thermomechanical Processing of Steels and Other Materials, Wollongong , Australia, July 7–11, pp. 539–545.
23. The Kinetics of Dynamic Recrystallization of 42CrMo Steel10.1016/j.msea.2012.06.084 ↗
24. Dynamic Recrystallization Kinetics Model of X70 Pipeline Steel10.1016/j.matdes.2012.02.034 ↗
25. Hot Deformation Behavior of Two C–Mn–Si Based and C–Mn–Al Based Microalloyed High-Strength Steels: A Comparative Study10.1016/j.matdes.2013.03.043 ↗
26. Prediction of the Critical Conditions for Initiation of Dynamic Recrystallization10.1016/j.matdes.2009.09.038 ↗
27. Experimental Study of Hot Deformation Behavior in API X65 Steel10.1016/j.msea.2013.02.045 ↗
28. Effect of Deformation Temperature on the Ductile–Brittle Transition Behavior of a Modified 9Cr–1Mo Steel10.1016/j.msea.2015.01.076 ↗
29. Study on Constitutive Modeling and Processing Maps for Hot Deformation of Medium Carbon Cr–Ni–Mo Alloyed Steel10.1016/j.matdes.2015.11.036 ↗
30. Warm Deformation Processing Maps for the Plain Eutectoid Steels10.1016/j.jallcom.2014.11.170 ↗
31. Hot Deformation Behavior of Austenitic Stainless Steel for a Wide Range of Initial Grain Size10.1016/j.msea.2013.01.050 ↗
32. Hot Deformation and Recrystallization of Austenitic Stainless Steel—Part I: Dynamic Recrystallization10.1007/s11661-008-9512-7 ↗
33. Constitutive Constants for Hot Working of Steels: The Critoical Strain for Dynamic Recrystallization in C-Mn Steels10.1007/s11665-014-1267-2 ↗
34. General Expression of the Zener–Hollomon Parameter as a Function of the Chemical Composition of Low Alloy and Microalloyed Steels10.1016/1359-6454(95)00151-0 ↗
35. The Effect of Temperature, Strain Rate and Carbon Content on Hot Deformation of Carbon Steels
36. Influences of Alloying Elements on Warm Deformation Behavior of High-Mn TRIP Steel With Martensitic Structure10.1016/j.matdes.2015.10.010 ↗
37. Matematical and Physical Simulation of Hot Rolling
38. Effect of Alloying on the Self-Diffusion Activation Energy in γ-Iron10.1134/S1063783411110308 ↗
39. First Principles Study of the Mn, Al, and C Distribution and Their Effect on the Stacking Fault Energies in FCC Fe10.1016/j.jallcom.2013.08.089 ↗
40. Influence of Cast Versus Wrought Microstructure on the Processing Map for Hot Working of Stainless Steel Type AISI 30410.1016/0167-577X(93)90132-H ↗
41. Effect of Initial Grain Size on Dynamic Recrystallization in High Purity Austenitic Stainless Steels10.1016/j.actamat.2005.06.020 ↗
42. EBSD Study on the Formation of Fine Ferrite Grains in Plain Carbon Steel During Warm Deformation10.1016/j.matlet.2007.01.019 ↗
43. Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation10.2355/isijinternational.43.684 ↗
44. Dynamic Recrystallization Kinetics of 42CrMo Steel During Compression at Different Temperatures and Strain Rates10.1016/j.msea.2011.02.090 ↗
45. Dynamic Recrystallization: Plasticity Enhancing Structural Development10.1016/j.jallcom.2003.10.067 ↗
46. Hot Deformation Behavior of Bearing Steels10.1115/1.2744392 ↗
47. A New Constitutive Equation to Predict Single Peak Flow Stress Curves10.1115/1.4023186 ↗
48. Behaviour of Low-Carbon and HSLA Steels During Torsion-Simulated Continuous and Interrupted Hot Rolling Practice10.1179/030716979803276534 ↗
49. Comparative High Temperature Constitutive Relationship for a Carbon Steel From Gleeble, Cam-Plastometer and Torsion Testing10.1179/cmq.1993.32.2.165 ↗
50. Peak Strength, Strain Hardening and Dynamic Restoration of A2 and M2 Tool Steels in Hot Deformation10.1016/S0921-5093(01)00976-5 ↗