journal article·2014-07-01

A Thermovisco-Hyperelastic Constitutive Model of NEPE Propellant Over a Large Range of Strain Rates

Junfa Zhang, Jian Zheng, Xiong Chen, Chaoxiang Sun, Jinsheng Xu

Publisher page

Abstract

The uniaxial compressive mechanical curves of nitrate ester plasticized polyether (NEPE) propellant under different temperatures and strain rates have been obtained with a universal testing machine and modified split Hopkinson pressure bar (SHPB). The experimental results show that the mechanical properties of NEPE propellant are both rate dependent and temperature dependent. With decreasing temperature or increasing strain rate, the modulus and rigidity obviously increase. Based on the previous models proposed by Yang and Pouriayevali, we propose a modified viscohyperelastic constitutive model which can describe the mechanical response over a large range of strain rates. Then we add a rate-dependent temperature item into the modified model to make a thermovisco-hyperelastic constitutive model. By comparing the experimental results with the model, we find that the thermovisco-hyperelastic constitutive model can correctly describe the uniaxial compressive mechanical properties of NEPE propellant at different temperatures and over a large range of strain rates from the static state to 4500 s−1.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Energetic Materials and Combustion · Elasticity and Material Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Beijing Institute of Space Long March Vehicle, Branch 76, Mail Box 9200, Beijing 100070, China e-mail:

Nanjing University of Science and Technology, 200 Xiaolingwei Street, Nanjing 210094, China e-mail:

References (34)

Show source-provided references
1. Effect of Tensile Rate on Mechanical Properties of NEPE Propellant
2. Mesoscale Dynamic Simulation on Phase Separation Between Plasticizer and Binder in NEPE Propellants10.1016/j.polymer.2008.04.020 ↗
3. Migration Kinetics and Mechanisms of Plasticizers, Stabilizers at Interfaces of NEPE Propellant/HTPB Liner/EDPM Insulation
4. Research of the Dynamic Mechanical Properties of NEPE Propellant
5. Constitutive Modeling of the Large Strain Time-Dependent Behavior of Elastomers10.1016/S0022-5096(97)00075-6 ↗
6. Constitutive Modeling of the Time-Dependent and Cyclic Loading of Elastomers and Application to Soft Biological Tissues10.1016/S0167-6636(01)00070-9 ↗
7. A Visco-Hyperelastic Constitutive Model to Characterize Both Tensile and Compressive Behavior of Rubber10.1002/app.20029 ↗
8. A Visco-Hyperelastic Approach to Modelling the Constitutive Behaviour of Rubber
9. A Visco-Hyperelastic Constitutive Description of Elastomer Behaviour at High Strain Rates10.1016/j.proeng.2011.04.376 ↗
10. A Constitutive Description of Elastomer Behaviour at High Strain Rates—A Strain-Dependent Relaxation Time Approach10.1016/j.ijimpeng.2012.04.001 ↗
11. One-Dimensional Dynamic Compressive Behavior of EPDM Rubber10.1115/1.1584492 ↗
12. Novel Model for Uniaxial Strain-Rate-Dependent Stress–Strain Behavior of Ethylene–Propylene–Diene Monomer Rubber in Compression or Tension10.1002/app.20095 ↗
13. Temperature-Dependent Viscoelastic Properties of the Human Supraspinatus Tendon10.1016/j.jbiomech.2008.11.013 ↗
14. Continuous Symmetry Analysis of a Dissipative Constitutive Law: Application to the Time-Temperature Superposition10.1016/j.euromechsol.2009.02.002 ↗
15. Research on Relaxation Modulus of Viscoelastic Materials Under Unsteady Temperature States Based on TTSP
16. Long-Term Creep Assessment of Viscoelastic Polymer by Time-Temperature-Stress Superposition10.1016/S0894-9166(12)60052-4 ↗
17. Thermoviscoelastic Constitutive Equation and Time-Temperature Equivalence of Resin at High Strain Rates
18. The Rate-Temperature Equivalence of Viscoelastic Behavior for Glassy Polymer PMMA
19. A Thermo-Viscoplastic Constitutive Model to Predict Elevated-Temperature Flow Behaviour in a Titanium-Modified Austenitic Stainless Steel
20. A Modified Johnson–Cook Constitutive Model for Mg–Gd–Y Alloy Extended to a Wide Range of Temperatures
21. Plastic Behavior and Constitutive Modeling of Armor Steel Over Wide Temperature and Strain Rate Ranges10.1016/S0894-9166(12)60055-X ↗
22. A Comparative Study on Johnson Cook, Modified Zerilli–Armstrong and Arrhenius-Type Constitutive Models to Predict Elevated Temperature Flow Behaviour in Modified 9Cr–1Mo Steel10.1016/j.commatsci.2009.09.025 ↗
23. Comparative Investigation on the Modified Zerilli–Armstrong Model and Arrhenius-Type Model to Predict the Elevated-Temperature Flow Behaviour of 7050 Aluminium Alloy10.1016/j.commatsci.2013.01.010 ↗
24. An Investigation of the Mechanical Properties of Materials at Very High Rates of Loading10.1088/0370-1301/62/11/302 ↗
25. The Effect of Radial Inertia on Brittle Samples During the Split Hopkinson Pressure Bar Test10.1016/j.ijimpeng.2005.12.001 ↗
26. Thickness Effects in Split Hopkinson Pressure Bar Tests10.1016/0032-3861(93)90181-9 ↗
27. Split-Hopkinson Pressure Bar of Soft Materials
28. Dynamic Compression Testing of Soft Materials10.1115/1.1464871 ↗
29. Mechanical Response of Pig Skin Under Dynamic Tensile Loading
30. Radial Inertia Effects in Kolsky Bar Testing of Extra-Soft Specimens10.1007/s11340-006-9017-5 ↗
31. Temperature Effects on Dynamic Compressive Behavior of an Epoxy Syntactic Foam10.1016/j.compstruct.2004.07.012 ↗
32. Preparation and Mechanical Properties of Polypropylene–Clay Hybrids Based on Modified Polypropylene and Organophilic Clay10.1002/1097-4628(20001209)78:11<1918::AID-APP100>3.0.CO;2-H ↗
33. A Study of Stress Relaxation With Finite Strain10.5254/1.3535640 ↗
34. Nonlinear Viscoelastic Solids—A Review10.1177/1081286509103660 ↗