Mechanical Properties of Additively Manufactured Periodic Cellular Structures and Design Variations
Source abstract
Abstract
Abstract Advances in manufacturing technologies have led to the development of a new approach to material selection, in which architectured designs can be created to achieve a specific mechanical objective. Cellular lattice structures have been at the forefront of this movement due to the ability to tailor their mechanical response through tuning of the topology, surface thickness, cell size, and cell density. In this work, the mechanical properties of additively manufactured periodic cellular lattices are evaluated and compared, primarily through the topology and surface thickness parameters. The evaluated lattices were based upon triply periodic minimal surfaces (TPMS), including novel variations on the base TPMS designs, which have not been tested previously. These lattices were fabricated out of Inconel 718 (IN718) through the selective laser melting (SLM) process. Specimens were tested under uniaxial compression, and the resultant mechanical properties were determined. Further discussion of the fabrication quality and deformation behavior of the lattices is provided. Results of this work indicate that the Diamond TPMS lattice has superior mechanical properties to the other lattices tested. Additionally, with the exception of the primitive TPMS lattice, the base TPMS designs exhibited superior mechanical performance to their derivative lattice designs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · Advanced Materials and Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Aeronautics, Air Force Institute of Technology, Wright Patterson AFB, OH 45433
Funding
Air Force Office of Scientific Research
References (21)
Show source-provided references
1. Aluminium Foams for Lighter Vehicles10.1504/IJVD.2005.006640 ↗
2. Liu · 2014 · 11310.1016/B978-0-12-407788-1.00003-4 ↗
3. Study of the Use of Metallic Foam in a Vehicle for An Energy-Economy Racing Circuit10.1002/mawe.201000594 ↗
4. Ballistic Performance of Composite Metal Foam Against Large Caliber Threats10.1016/j.compstruct.2019.111032 ↗
5. Scheffler · 200510.1002/3527606696 ↗
6. On Mechanical Properties of Cellular Steel Solids With Shell-Like Periodic Architectures Fabricated by Selective Laser Sintering10.1115/1.4041874 ↗
7. Ashby · 2005
8. Mechanical Properties of 3D Printed Polymeric Cellular Materials With Triply Periodic Minimal Surface Architectures10.1016/j.matdes.2017.03.018 ↗
9. Polymer Structures With the Topology of Triply Periodic Minimal Surfaces10.1134/S1087659617060177 ↗
10. Topology-Mechanical Property Relationship of 3D Printed Strut, Skeletal, and Sheet Based Periodic Metallic Cellular Materials
11. An Overview of Additive Manufacturing of Polymers and Associated Composites10.3390/polym12112719 ↗
12. Schoen · 1970
13. Curvature in the Calculus Curriculum10.1080/00029890.2003.11919999 ↗
14. Krivoshapko · 2015 · 42710.1007/978-3-319-11773-7_19 ↗
15. Survivability and Damage Modeling of Advanced Materials
16. First Cell Failure of Lattice Structure Under Combined Axial and Buckling Load
17. ASTM International · 2019
18. Robert McNeel Associates · 2020
19. Selective Laser Melting Additive Manufacturing of Inconel 718 Superalloy Parts: Densification, Microstructure and Properties10.1016/j.jallcom.2013.09.171 ↗
20. Rao · 201610.1002/9781119241829 ↗
21. Foam Topology: Bending Versus Stretching Dominated Architectures10.1016/S1359-6454(00)00379-7 ↗