journal article·2019-07-01

Cold Metal Transfer Welding of AA6061 to AA7075: Mechanical Properties and Corrosion

Nilay Çömez, Hülya Durmuş

Publisher page

Abstract

Cold metal transfer (CMT) welding provides many advantages for welding of dissimilar materials and thin sheets with its superior heat input control mechanism. In this study, AA6061 and AA7075 aluminum alloys were joined with CMT welding. The effect of welding parameters on hardness, tensile strength, and corrosion rate was investigated. The Tafel extrapolation method was carried out to determine the corrosion rates of AA6061 and AA7075 base metals and AA6061–AA7075 joints. Increasing heat input was found to be detrimental for both mechanical properties and corrosion resistance. The outcomes showed that CMT welding produces adequate joints of AA6061–AA7075 in terms of mechanical properties and corrosion resistance, favorably with welding parameters that provide low heat input.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Engineering Faculty, Department of Metallurgical and Materials Engineering, Manisa Celal Bayar University, 45140 Manisa, Turkey e-mail:

References (35)

Show source-provided references
1. Analysis of Influence of Material-Technological Conditions of Alternating Polarity MIG Welding of Aluminum Alloys on Welding Fumes Emission
2. Feasibility Study on Joining Dissimilar Aluminum Alloys AA6061 and AA7075 by Tungsten Inert Gas (TIG)10.11113/jt.v75.5177 ↗
3. Friction Stir Welding of Dissimilar Materials Between AA6061 and AA7075 Al Alloys Effects of Process Parameters10.1016/j.matdes.2013.10.082 ↗
4. Effect of Filler Metal and Post-Weld Friction Stir Processing on Stress Corrosion Cracking Susceptibility of Al–Zn–Mg Arc Welds10.1179/1362171814Y.0000000273 ↗
5. Study on Mechanical, Micro-, and Macrostructural Characteristics of Dissimilar Friction Stir Welding of AA6061-T6 and AA7075-T610.1243/09544054JEM1959 ↗
6. Control of Mass and Heat Transfer for Steel/aluminum Joining Using Cold Metal Transfer Process10.1179/1362171814Y.0000000271 ↗
7. Cold Metal Transfer (CMT) GMAW of Zinc-Coated Steel
8. Effectiveness of Cold Metal Transfer Process for Welding 7075 Aluminum Alloys10.1179/1362171815Y.0000000017 ↗
9. A Review of Welding Parameter on Corrosion Behavior of Aluminum
10. Corrosion of a Dissimilar Friction Stir Weld Joining Aluminum Alloys AA2024 and AA701010.1179/174327806X107905 ↗
11. Corrosion Study in Friction Stir Welded Plates of AA6061 and AA7075
12. Stress Corrosion Cracking Susceptibility of Friction Stir Welded AA7075–AA6056 Dissimilar Joint10.1016/j.msea.2004.09.065 ↗
13. Corrosion Studies on Friction Welded Dissimilar Aluminum Alloys of AA7075-T6 and AA6061-T610.1016/S1452-3981(23)08078-1 ↗
14. Improved Microstructure and Properties of 6061 Aluminum Alloy Weldments Using a Double-Sided Arc Welding Process10.1007/s11661-000-0198-8 ↗
15. Determination of the Tensile Behavior at Middle Strain Rate of AA6061-T6 Aluminum Alloy Welds10.1016/j.ijimpeng.2013.04.006 ↗
16. Hardness–Tensile Property Relationships for HAZ in 6061­T651 Aluminum
17. Microstructure and Mechanical Properties of AA7075(T6) Hybrid Laser/GMA Welds10.1016/j.msea.2006.12.094 ↗
18. Bauccio · 1993 · 614
19. Corrosion Fatigue Behaviour of Aluminum Alloy 6061-T651 Welded Using Fully Automatic Gas Metal Arc Welding and ER5183 Filler Alloy10.1016/j.ijfatigue.2011.06.012 ↗
20. Pulsed Ultrasonic­Wave­Assisted GMAW of 7A52 Aluminum Alloy
21. Effect of Process Parameters on Mechanical Properties of Friction Stir Welded Dissimilar Materials Between AA6061-T651 and AA7075-T651 Alloys
22. Predicting Tensile Strength, Hardness and Corrosion Rate of Friction Stir Welded AA6061-T6 Aluminum Alloy Joints10.1016/j.matdes.2010.12.025 ↗
23. Effect of Aging Time at Low Aging Temperatures on the Corrosion of Aluminum Alloy 606110.1016/j.corsci.2011.09.011 ↗
24. Effect of Micro Arc Oxidation Treatment on Localized Corrosion Behaviour of AA7075 Aluminum Alloy in 3.5% NaCl Solution10.1016/S1003-6326(11)61234-X ↗
25. Corrosion Behaviour of Different Tempers of AA7075 Aluminum Alloy10.1016/j.electacta.2004.01.046 ↗
26. Corrosion Behavior of Aluminum 6061 Alloy Joined by Friction Stir Welding and Gas Tungsten Arc Welding Methods10.1016/j.matdes.2012.02.043 ↗
28. Characterization of a Friction-Stir-Welded Aluminum Alloy 601310.1007/s11663-002-0059-5 ↗
29. Corrosion of AA6061 Brazed With an Al-Si Alloy: Effects of Si on Metallurgical and Corrosion Behavior10.5006/0677 ↗
30. Corrosion Resistance of Repair Welded Naval aluminum Alloys10.1016/j.matdes.2005.11.005 ↗
31. Ghali · 2010 · 64010.1002/9780470531778 ↗
32. Martienssen · 2006 · 1121
33. Corrosion Behaviour of Aluminum and AA5754 Alloy in 1% Acetic Acid Solution in Presence of Laurel Oil10.1016/S1452-3981(23)08184-1 ↗
34. Vargel · 2004 · 700
35. Study of Al Alloy Corrosion in Neutral NaCl by the Pitting Scan Technique10.1016/j.matchemphys.2010.02.022 ↗