Application of the VPSC Model to the Description of the Stress–Strain Response and Texture Evolution in AZ31 Mg for Various Strain Paths
Source abstract
Abstract
Accurate description of the mechanical response of AZ31 Mg requires consideration of its strong anisotropy both at the single crystal and polycrystal levels, and its evolution with accumulated plastic deformation. In this paper, a self-consistent mean field crystal plasticity model, viscoplastic self-consistent (VPSC), is used for modeling the room-temperature deformation of AZ31 Mg. A step-by-step procedure to calibrate the material parameters based on simple tensile and compressive mechanical test data is outlined. It is shown that the model predicts with great accuracy both the macroscopic stress–strain response and the evolving texture for these strain paths used for calibration. The stress–strain response and texture evolution for loading paths that were not used for calibration, including off-axis uniaxial loadings and simple shear, are also well described. In particular, VPSC model predicts that for uniaxial tension along the through-thickness direction, the stress–strain curve should have a sigmoidal shape.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Aerospace Engineering, REEF, University of Florida, 1350 North Poquito Road, Shalimar, FL 32579
General Motors Research and Development Center, 30500 Mound Road, Warren, MI 40890-9055
Department of Mechanical and Aerospace Engineering, REEF, University of Florida, 1350 North Poquito Road, Shalimar, FL 32579 e-mail:
References (27)
Show source-provided references
1. On the Thermally Activated Mechanism of Prismatic Slip in Magnesium Single Crystals
2. Additional Modes of Deformation Twinning in Magnesium10.1016/0001-6160(57)90074-3 ↗
3. Plastic Anisotropy and the Role of Non-Basal Slip in Magnesium Alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
4. A Self-Consistent Anisotropic Approach for the Simulation of Plastic Deformation and Texture Development of Polycrystals: Application to Zirconium Alloys10.1016/0956-7151(93)90130-K ↗
5. Modeling the Temperature Dependent Effect of Twinning on the Behavior of Magnesium Alloy AZ31B Sheet10.1016/j.msea.2006.03.160 ↗
6. Mechanical Response and Texture Evolution of AZ31 Alloy at Large Strains for Different Strain Rates and Temperatures10.1016/j.ijplas.2010.08.009 ↗
7. Hardening Evolution of AZ31B Mg Sheet10.1016/j.ijplas.2006.03.005 ↗
8. Deformation Twinning in AZ31: Influence on Strain Hardening and Texture Evolution10.1016/j.actamat.2010.07.041 ↗
9. Simulation of the Rolling and Shear Texture of Brass by the Taylor Theory Adapted for Mechanical Twinning10.1016/0001-6160(78)90111-6 ↗
10. A Model for Texture Development Dominated by Deformation Twinning: Application to Zirconium Alloys10.1016/0956-7151(91)90083-D ↗
11. Modeling the Effect of Twinning and Detwinning During Strain-Path Changes of Magnesium Alloy AZ3110.1016/j.ijplas.2008.05.005 ↗
12. A Crystal Plasticity Model for Hexagonal Close Packed (HCP) Crystals Including Twinning and De-Twinning Mechanisms10.1016/j.ijplas.2013.02.016 ↗
13. Plastic Strain in Metals
14. Analysis of Plastic Strain in a Cubic Crystal
15. A Finite Strain Elastic–Viscoplastic Self-Consistent Model for Polycrystalline Materials10.1016/j.jmps.2010.01.004 ↗
16. Simulation of Earing During Deep Drawing of Magnesium Alloy AZ3110.1016/j.actamat.2006.09.007 ↗
17. Simulation of Strain-Softening Behaviors in an AZ31 Mg Alloy Showing Distinct Twin-Induced Reorientation Before a Peak Stress10.1007/s12540-009-0239-9 ↗
18. Evaluation of Self-Consistent Polycrystal Plasticity Models for Magnesium Alloy AZ31B Sheet10.1016/j.ijsolstr.2010.06.016 ↗
19. Manual for Code Visco-Plastic Self-Consistent
20. A Dislocation-Based Constitutive Law for Pure Zr Including Temperature Effects10.1016/j.ijplas.2007.07.017 ↗
21. On the Swift Effect and Twinning in a Rolled Magnesium Alloy Under Free-End Torsion10.1016/j.scriptamat.2013.05.010 ↗
22. On Linear Transformations of Stress Tensors for the Description of Plastic Anisotropy10.1016/j.ijplas.2006.10.001 ↗
23. Orthotropic Yield Criterion for Hexagonal Closed Packed Metals10.1016/j.ijplas.2005.06.001 ↗
24. 1950
25. Anisotropic Response of High-Purity α-Titanium: Experimental Characterization and Constitutive Modeling10.1016/j.ijplas.2009.08.007 ↗
26. Texture Evolution of Five Wrought Magnesium Alloys During Route A Equal Channel Angular Extrusion: Experiments and Simulations10.1016/j.actamat.2005.02.019 ↗
27. Texture and Mechanical Behavior of Magnesium During Free-End Torsion10.1115/1.3030973 ↗