Investigation into Tangential Force and Axial Stress Effects on Fretting Fatigue Behavior
Source abstract
Abstract
Fretting fatigue behavior of a titanium alloy was investigated using a dual actuator test setup which was capable to apply the pad displacement independent of the applied cyclic load on specimen. Fretting fatigue tests were conducted using this setup with a phase difference between cyclic load on the specimen and tangential force on the fretting pad with cylinder-on-flat contact configuration under partial slip condition. Two axial stress ratios were used. The relative slip range and tangential force range were related to each other and this relationship was not influenced by phase difference, axial stress ratio, and contact load under the partial slip condition. Change in the phase difference caused the change in relative slip as well as tangential force for a given applied pad displacement and axial load. However, there was no effect of phase difference on fretting fatigue life at a given relative slip level. Fretting fatigue tests with a fully reversed axial stress showed longer fatigue life than tension-tension counterparts at a given relative slip, tangential force range, and axial stress range. Finite element analysis was conducted by including the complete load history effects, which showed that stress distribution on the contact surface stabilized after the first fatigue cycle. Unlike relative slip and∕or tangential force range, a critical plane-based parameter appears to take into account the stress ratio effects to characterize fretting fatigue behavior.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Electrical Contact Performance and Analysis · Vibration and Dynamic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Advanced Materials Engineering, Andong National University, Andong, Gyungbuk 760-749, South Korea
Department of Aeronautics and Astronautics, Air Force Institute of Technology (AFIT∕ENY), Wright-Patterson AFB, OH 45433-7765
References (20)
Show source-provided references
1. Fundamental Investigation of Fretting Fatigue—Part 2. Fretting Fatigue Testing Machine and Some Test Results10.1299/jsme1958.12.180 ↗
2. Fundamental Investigation of Fretting Fatigue—Part 5. The Effect of Relative Slip Amplitude10.1299/jsme1958.12.692 ↗
3. On Fretting Maps10.1016/0043-1648(88)90134-2 ↗
4. Hills
5. Fretting Fatigue Testing Methodology Incorporating Independent Slip and Fatigue Stress Control
6. Anton, D. L., Lutian, M. J., Favrow, L. H., Logan, D., and Annigeri, B. S., 2000, “The Effects of Contact Stress and Slip Distance on Fretting Fatigue Damage in Ti-6Al-4V∕17-4PH Contacts,” in Fretting-fatigue: Current Technologies and Practices, D. W.Hoeppneret al., eds., ASTM STP 1367, American Society for Testing and Materials, West Conshohocken, pp. 119–140.10.1520/STP14725S ↗
7. Effect Of Independent Pad Displacement on Fretting Fatigue Behavior Of Ti-6Al-4V10.1016/S0043-1648(02)00061-3 ↗
8. Influence of Contact Configuration on Fretting Fatigue Behavior of Ti-6Al-4V Under Independent Pad Displacement Condition10.1016/S0142-1123(02)00041-5 ↗
9. Shear Force Effects on Fretting Fatigue Behavior of Ti-6Al-4V
10. Lee, H., and Mall, S., “Fretting Fatigue Behavior of Shot Peened Ti-6Al-4V Under Slip Controlled Mode,” Wear (in press).
11. An Apparatus for Quantitative Fretting Fatigue Testing10.1046/j.1460-2695.1999.00145.x ↗
12. ABAQUS Standard User’s Manual, 2002, Hibbit, Karlsson and Sorensen Inc., Pawtucket.
13. Contact Stresses in a Moderately Thin Strip (with Particular Reference to Fretting Experiment)10.1016/0043-1648(95)06613-6 ↗
14. Elasto-Plastic Finite Element Analysis of Fretting Stresses in Pre-Stressed Strip in Contact With Cylindrical Pad10.1016/S0168-874X(00)00016-0 ↗
15. Effect of Cyclic Frequency and Contact Pressure on Fretting Fatigue Under Two-level Block Loading10.1046/j.1460-2695.2000.00288.x ↗
16. Investigation of High Cycle and Low Cycle Fatigue Interaction on Fretting Behavior10.1016/S0020-7403(02)00063-2 ↗
17. Fretting Fatigue Crack Initiation Mechanism in Ti-6Al-4V10.1046/j.1460-2695.2002.00549.x ↗
18. Walker, K. , 1970, “The Effective Stress Ratio During Crack Propagation and Fatigue for 2024-T3 and 7075-T6 Aluminum,” in Effects on Environment and Complex Load History on Fatigue Life, ASTM STP, 462, American Society for Testing and Materials, Philadelphia, pp. 1–14.10.1520/STP32032S ↗
19. Critical Issues in High Cycle Fatigue10.1016/S0142-1123(99)00074-2 ↗
20. Suresh10.1017/CBO9780511806575 ↗