journal article·1990-07-01

The Effect of Temperature on the Material Damping of Graphite/Epoxy Composites in a Simulated Space Environment

G. T. Spirnak, J. R. Vinson

Publisher page

Abstract

An experimental method for measuring material damping is described, which employs a free-free beam lightly supported at the nodes. A thermal space environment is simulated by measuring the material damping in air at temperatures ranging from −65°F to 225°F, and then subtracting out the effects of atmospheric damping. This method saves considerable time, cost and experimental difficulties associated with performing the experiments in a vacuum. Graphite/epoxy AS4/3501-6 composite beam specimens were tested. At room temperature, the [0°]12 composites were found to have an average damping ratio of 0.0556 percent. The [90°]12 composites were found to have an average material damping ratio of 0.55 percent. These data agree well with the theoretical models and experimental measurements performed in a vacuum. The material damping ratio is temperature dependent over the range −65°F to 225°F, increasing with increasing temperature. For the [0°]12 composite, the material damping ratio varies from 0.0397 percent at −65°F to 0.083 percent at 225°F. For the [90°]12 composite, the material damping ratio varies from 0.408 percent at −65°F to 0.860 percent at 225°F.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

U.S. Air Force, Kennedy Space Craft Center, Cape Canaveral, FL

University of Delaware, Newark, DE 19716

References

Reference metadata was not supplied for this record.