journal article·2021-10-01

Dynamic Out-of-Plane Compressive Failure Mechanism of Carbon/Carbon Composite: Strain Rate Effect on the Defect Propagation and Microstructure Failure

Fei Guo, Qingguo Fei, Yanbin Li, Nikhil Gupta

Publisher page

Abstract

Abstract Out-of-plane compression experiments with the strain rate from 0.0001/s to 1000/s are performed on a three-dimensional (3D) fine weave-pierced Carbon/Carbon (C/C) composite using a universal testing machine, a high-speed testing machine, and a split Hopkinson pressure bar (SHPB). The compressive failure mechanism of the composite is analyzed by a multi-scale analysis method, which ranges from micro-scale defect propagation, through meso-scale microstructure failure, to macro-scale material failure. In order to predict the out-of-plane compressive properties of 3D fine weave-pierced C/C composite at different strain rates, a strain-rate-dependent compressive constitutive model is proposed. The results show that the out-of-plane compressive behavior of the 3D fine weave-pierced C/C composite is sensitive to strain rate. With increasing the strain rate, the initial compressive modulus, the maximum stress, and the strain at the maximum stress increase. The difference in mechanical behavior between quasi-static and high strain rate compression is owing to the strain rate effect on the defect propagation of the 3D fine weave-pierced C/C composite. The proposed constitutive model matches well with the experimental data.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Advanced ceramic materials synthesis · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Jiangsu Engineering Research Center of Aerospace Machinery, Department of Engineering Mechanics, Southeast University, Nanjing 211189, China

Jiangsu Engineering Research Center of Aerospace Machinery, School of Mechanical Engineering, Southeast University, Nanjing 211189, China

Composite Materials and Mechanics Laboratory, Department of Mechanical and Aerospace Engineering, Tandon School of Engineering, New York University, Brooklyn, NY 11201

Funding

National Natural Science Foundation of China · Natural Science Foundation of Jiangsu Province

References (38)

Show source-provided references
1. Schmidt, · 1996
2. Ultra-High-Temperature Ceramic Coatings for Oxidation Protection of Carbon–Carbon Composites10.1111/j.1551-2916.2008.02331.x ↗
3. Rana · 2016 · 1
4. Scarponi · 2016 · 385
5. A Review of Carbon–Carbon Composites for Engineering Applications10.1016/j.carbon.2015.04.068 ↗
6. Perforation of Needle-Punched Carbon-Carbon Composites During High-Temperature and High-Velocity Ballistic Impacts10.1016/j.compstruct.2020.112224 ↗
7. High Frequency Vibration of Aircraft Structures10.1016/S0022-460X(73)80036-7 ↗
8. Strain Rate and Temperature Effect on Mechanical Properties and Failure of 3D Needle-Punched Carbon/Carbon Composites Under Dynamic Loading10.1016/j.compstruct.2016.11.082 ↗
9. Dynamic Shear Fracture Behaviors and “Pseudo-Plastic” Constitutive Model of Carbon/Carbon Composite Pins10.1016/j.ijmecsci.2020.105903 ↗
10. Transverse Properties Prediction of Polymer Composites at High Strain Rates Based on Unit Cell Model10.1061/(ASCE)AS.1943-5525.0000813 ↗
11. An Innovative Yield Criterion Considering Strain Rates Based on Von Mises Stress10.1115/1.404490 ↗
12. Three-Dimensional Carbon/Carbon Composites with Vertically Aligned Carbon Nanotubes: Providing Direct and Indirect Reinforcements to the Pyrocarbon Matrix10.1016/j.matdes.2015.12.036 ↗
13. Strengths of C/C Composites Under Tensile, Shear, and Compressive Loading: Role of Interfacial Shear Strength10.1016/j.compscitech.2005.07.012 ↗
14. Failure Behavior of Three-Axis Woven Carbon/Carbon Composites Under Compressive and Transverse Shear Loads10.1016/S0266-3538(02)00028-3 ↗
15. Increasing the Tensile Property of Unidirectional Carbon/Carbon Composites by Grafting Carbon Nanotubes Onto Carbon Fibers by Electrophoretic Deposition10.1016/j.jmst.2013.05.015 ↗
16. Compressive Fracture Behavior of 3D Needle-Punched Carbon/Carbon Composites10.1016/j.msea.2011.03.055 ↗
17. Numerical Evaluation of the Influence of Porosity on Bending Properties of 2D Carbon/Carbon Composites10.1016/j.compositesb.2017.10.027 ↗
18. The Failure Mechanism of 3D C/C Composite Under Compression-Shear Coupled Loads: An Experimental Study10.1007/s40799-019-00351-x ↗
19. Novel Statistical Analysis Method for Determining Shear Strength of C/C Composite Pin10.1016/j.ceramint.2019.10.275 ↗
20. Experimental Investigation on the Compression Properties and Failure Mechanism of 3D Braided Composites at Room and Liquid Nitrogen Temperature10.1016/j.compositesb.2013.08.068 ↗
21. Bend Properties and Failure Mechanism of a Carbon/Carbon Composite with a 3D Needle-Punched Preform at Room and High Temperatures10.1016/S1872-5805(16)60023-9 ↗
22. Mechanical Properties in Compression of Low Density Carbon/Carbon Composites10.1016/0010-4361(94)90021-3 ↗
23. Quasi-Static and Dynamic Compressive Fracture Behavior of Carbon/Carbon Composites10.1016/j.carbon.2008.01.031 ↗
24. Strain Rate Sensitivity of C/C Composites Under Compression
25. An Investigation Into Strain-Rate-Dependent Constitutive Properties of a Sandwiched Epoxy Interface10.1016/j.matdes.2016.09.068 ↗
26. Predictions of Viscoelastic Strain Rate Dependent Behavior of Fiber-Reinforced Polymeric Composites10.1016/j.compstruct.2011.11.016 ↗
27. Dynamic Compressive Mechanical Properties and a new Constitutive Model of 2D-C/SiC Composites10.1016/j.msea.2008.01.014 ↗
28. Influence of the Strain Rate on the Mechanical Behavior of the 3D Needle-Punched C/SiC Composite10.1016/j.msea.2009.01.024 ↗
29. Characterization and Constitutive Modeling of Composite Materials Under Static and Dynamic Loading10.2514/1.J050797 ↗
30. Research Progress on Preforms of C/C Composites
31. Microstructure and Mechanical Behaviors of T700 Carbon Fiber Reinforced C/SiC Composites via Precursor Infiltration and Pyrolysis10.1016/j.msea.2016.03.090 ↗
32. Through-thickness Compressive Strength of a Carbon/Epoxy Composite Laminate10.1016/j.compstruct.2009.08.032 ↗
33. Through-thickness Compressive Strength of Carbon–Phenolic Woven Composites10.1016/j.compstruct.2004.09.001 ↗
34. Strain Rate-Dependent Compressive Behavior and Failure Mechanism of Cementitious Syntactic Foams10.1016/j.cemconcomp.2018.10.009 ↗
35. An Anisotropic Elastoplastic Damage Constitutive Model for 3D Needled C/C-SiC Composites10.1016/j.compstruct.2017.04.043 ↗
36. Numerical Simulation of the Ballistic Response of GRP Plates10.1016/S0266-3538(98)00030-X ↗
37. Historical Development of the Newton–Raphson Method10.1137/1037125 ↗
38. Influence of Compression and Shear on the Strength of Composite Laminates with z-Pinned Reinforcement10.1007/s10443-005-9005-4 ↗